Vaporesso XROS Mini Retro Pod Kit

The Vaporesso XROS Mini Retro is the most compact pod kit in the XROS lineup, a buttonless, fixed-18W refillable vape for mouth-to-lung (MTL) and airier restricted direct-to-lung (RDTL) vaping. A 1000mAh built-in battery covers a full day of use, while COREX 3.0 pod technology gives smooth, consistent flavour.

Included is a 0.6 Ohms COREX 3.0 pod for a warmer, airier RDTL draw, and the kit is also compatible with the wider Vaporesso XROS pod range for full flexibilty. It suits anyone moving on from disposables, or an existing vaper after a hassle-free everyday XROS.

Compact Retro Design

At 98.9 x 23.7 x 13.7mm, the XROS Mini Retro is the smallest device in the range and slips easily into a pocket. The retro-styled body stays slim and light without feeling basic, and it is available in eight finishes, from Space Black to Spring Green.

1000mAh Battery & USB-C Charging

The 1000mAh built-in battery comfortably lasts most users a full day of moderate vaping. When it runs low, USB-C charging brings it back to full in about an hour (cable sold separately). A four-light LED on the front shows how much charge is left, so you are never caught out with a flat battery.

Buttonless Inhale Activation

There are no buttons, no screen and no on/off switch; you simply inhale on the mouthpiece to vape, much like a disposable. Output is fixed at 18W, so there is nothing to dial in.

COREX 3.0 Mesh Pods

The kit uses Vaporesso's COREX 3.0 mesh pods, with upgraded mesh that heats quickly and wicks evenly, keeping the flavour clean and consistent as you vape. The pod works best with 50/50 or nic salt e-liquids, such as Vaporesso's own DoJoLiq.

SSS Anti-Leak 2.0

Vaporesso's SSS Anti-Leak 2.0 seals each pod against leaks and condensation, locking the e-liquid inside. That keeps refills clean and means less mess in a pocket or bag.

Resistance & Draw Styles

The XROS Mini Retro is compatible with the full range of Vaporesso XROS pods, across both COREX 2.0 and 3.0, apart from the 0.4 Ohms, which needs more power than the fixed 18W delivers. With the airflow fixed, you change the pod to change the draw:

• 0.6 Ohms (included) - an airy RDTL draw
• 0.8 Ohm - a smooth MTL draw
• 1.0 Ohms - a tighter MTL draw
• 1.2 Ohms - the tightest, most cigarette-like MTL draw

Compatible With

• Vaporesso XROS Replacement Pods (COREX 2.0 + 3.0, All XROS Pods Except 0.4 Ohms)

Recommended To Use With

• Nic Salt E-Liquids
• 50/50 Freebase E-Liquids
• MTL (Mouth-To-Lung)
• RDTL (Restricted Direct-To-Lung)

Colours

• Baby Blue
• Baby Pink
• Baby Purple
• Dark Indigo
• Matte Silver
• Space Black
• Space Grey
• Spring Green

Key Features

• Most Compact XROS Pod Kit
• Buttonless Inhale Activation
• Fixed 18W Output
• 1000mAh Built-In Battery
• USB-C Charging (Full Charge In Around An Hour)
• Four-Light LED Battery Indicator
• COREX 3.0 Mesh Pods (0.6 Ohms Included)
• 2ml Side-Fill Pods
• SSS Anti-Leak 2.0
• Fixed Airflow (Change Pod To Change The Draw)
• Compatible With The XROS Pod Range (COREX 2.0 + 3.0, Except 0.4 Ohms)
• 8 Colours

What's in the Box

• 1 x Vaporesso XROS Mini Retro Device
• 1 x XROS 0.6 Ohms COREX 3.0 Pod (Pre-installed)
• 1 x User Manual & Warranty Card

Frequently Asked Questions

What nicotine strength should I use in the XROS Mini Retro?

For MTL or airy RDTL vaping, most people use a 10mg or 20mg nic salt. 20mg suits a heavier previous smoking habit, while 10mg is a lighter option, and both work well with the included 0.6 Ohms pod.

When should I replace the pod on the XROS Mini Retro?

When the flavour starts to fade or the vape tastes a little burnt, it is time for a fresh pod, usually every week or so with regular use. Refilling before it runs dry helps each pod last a little longer.

How long does the XROS Mini Retro take to charge?

From empty it charges to full in about an hour over USB-C.