Vaporesso XROS COREX 3.0 Replacement Pods

Official Vaporesso replacement pods for the full XROS series, now upgraded with COREX 3.0 heating technology. Each pack of 4 holds 2ml of e-liquid and has a built-in mesh coil, so there's no coil swapping needed. Five resistances from 0.4 to 1.2 Ohms cover tight mouth-to-lung (MTL) draws through to looser restricted-direct-to-lung (RDTL) vaping, and they pair well with nic salts or 50/50 e-liquids.

The step up from COREX 2.0 is Vaporesso's Hive Mesh structure - a finer heating wire that distributes heat more evenly for cleaner flavour and longer-lasting pods. Cumulus cotton replaces the standard wicking material, saturating faster and holding up when liquid levels get low.

COREX 3.0 Hive Mesh

Vaporesso's Hive Mesh uses a tighter grid pattern than the previous Morph Mesh, heating the e-liquid from edge to centre for richer flavour with each puff. The 0.6 Ohm pod gets roughly 40% more heating area compared to its COREX 2.0 version. That translates to fuller vapour and more consistent taste right through to the end of the pod.

Top-Fill & SSS Leak-Resistant

Snap off the mouthpiece, fill through the silicone port, and click it back on - no need to remove the pod from your XROS kit. Vaporesso's SSS leak-resistant construction keeps e-liquid locked inside, which helps avoid the mess you sometimes get with cheaper pods. Let it sit for about 10 minutes on the first fill so the Cumulus cotton fully saturates before you start vaping.

Choosing Your Resistance

Pick the right Ohm for how you vape. There's no wattage to set either - every XROS kit handles the power automatically.

All XROS pods (except 0.4 Ohms) are compatible with every kit in the XROS range, including older devices like the XROS 2 and XROS 3. Keep high-VG blends to the 0.4 Ohms pod; the tighter resistances are built for thinner 50/50 e-liquids and nic salts, and burn out early on thick juice.

Compatible With

• Vaporesso XROS
• Vaporesso XROS 2
• Vaporesso XROS Mini
• Vaporesso XROS Nano
• Vaporesso XROS 3
• Vaporesso XROS 3 Mini
• Vaporesso XROS 3 Nano
• Vaporesso XROS Cube
• Vaporesso XROS 4
• Vaporesso XROS 4 Mini
• Vaporesso XROS 4 Nano
• Vaporesso XROS 5
• Vaporesso XROS 5 Mini
• Vaporesso XROS 5 Nano
• Vaporesso XROS Pro
• Vaporesso XROS Pro 2
• Vaporesso XROS 6
• Vaporesso XROS 6 Mini
• Vaporesso XROS Mini Retro

Please note: The 0.4 Ohm pod is only compatible with the XROS Pro, XROS Pro 2 and the XROS 4, 5 and 6 series (including the Minis and Nanos). It does not fit the XROS Mini Retro or the older XROS models.

Key Features

• Pack of 4 Replacement Pods
• 2ml TPD-Compliant Capacity
• COREX 3.0 Hive Mesh Coil Technology
• Cumulus Cotton Wicking
• 0.4, 0.6, 0.8, 1.0, and 1.2 Ohms Resistance Options
• Top-Fill Design
• SSS Leak-Resistant Technology
• PCTG Construction
• Magnetic Pod Connection
• Compatible With All Vaporesso XROS Kits

What's In The Box

• 4 x Vaporesso XROS COREX 3.0 Replacement Pod (resistance as selected)

Stocking up for more than one kit? Browse the full Vaporesso XROS pods range for every resistance in one place.

Vaporesso XROS Pods FAQs

How long does a Vaporesso XROS pod last?

Around a week of regular use, often stretching to ten days. Sweeter e-liquids shorten that, so swap the pod once the flavour starts to fade.

Are COREX 2.0 and 3.0 pods interchangeable?

Yes. Both generations fit the same XROS kits, and the 0.4 Ohms power rule applies to each. The 3.0 pods add the Hive Mesh coil and Cumulus cotton, so they are the ones to pick up when you restock.

Why does my XROS pod taste burnt?

The coil inside has reached the end of its life, so replace the pod rather than refilling it again. Letting a fresh pod sit for ten minutes before the first puff prevents an early burnt taste.

Do XROS pods leak?

The top-fill port and SSS construction keep e-liquid where it should be. Fill the pod upright and seat the mouthpiece fully, and it stays sealed in the kit.