SMOK Morph 3 Sub-Ohm Vape Kit

The SMOK Morph 3 is a sub-ohm box-mod kit built for big clouds and strong flavour. It delivers up to 230W from dual external 18650 batteries and pairs the Morph 3 mod with the T-Air Subtank, a direct-to-lung (DTL) setup for experienced vapers who want full power on tap. It is the third generation of the SMOK Morph line.

The T-Air Subtank holds 2ml and pairs with SMOK's TA mesh coils. A 0.2 Ohms mesh coil comes pre-installed for an airier, cloud-heavy draw, and a 0.4 Ohms mesh coil is supplied as a spare that runs cooler with warmer flavour.

It is a lot of power in a body you can still pocket, which makes the Morph 3 a strong choice for sub-ohm vapers who want the wattage without the bulk. Just add two 18650 batteries to get started.

230W Dual-Battery Power

The Morph 3 delivers up to 230W of output from two external 18650 batteries, with variable wattage adjustable across 5W to 230W. The cells are removable and sold separately, so you can swap in a charged pair when one runs low or top them up in the device over USB-C at 2.0A. An upgraded chipset adds over-charge, over-discharge, short-circuit and overheat protection in the background. That power suits low-resistance sub-ohm coils and high-VG e-liquids for dense vapour and rich flavour.

0.96in TFT Screen & Adaptive Power

A 0.96in TFT colour screen shows your wattage, coil resistance, mode and battery status at a glance, all controlled by button rather than touch. The Adaptive Power Function matches real-time wattage to your remaining battery life to keep output stable across the session. Temperature control mode is on board too, and button-combo shortcuts let you switch functions with a couple of clicks rather than digging through menus.

T-Air Subtank with Top Fill

A quarter-turn top cap and dual fill ports open the T-Air up for refills, so topping up is quick and mess-free. Its dual-slotted honeycomb top airflow shortens the airway so less is lost between coil and mouthpiece, and adjusts from a loose, open DTL draw down to a tighter, more restricted one.

Push-Fit TA Mesh Coils

SMOK's TA coils push into place rather than screwing in, so a coil change is a quick pull-and-push with no threads to line up. Alongside the two supplied coils, the tank also takes the 0.15 Ohms dual-mesh TA coil, whose twin mesh heats evenly for a smooth vape. You can find replacements in our coils collection.

Compact Zinc-Alloy Build

The Morph 3 is built around a zinc-alloy chassis with a soft-touch leather grip, so it feels solid and comfortable in the hand rather than plasticky. The footprint stays compact and pocket-friendly, and the build is sturdy enough to take the knocks of everyday carry.

Colours

• Black
• Black Gun Metal
• Blue
• Blue Haze
• Carbon Fiber
• Cyan
• Orange
• Pink Gold
• Prism Rainbow
• Purple Haze
• Purple Pink
• Red
• White

Key Features

• 230W Max Output
• Dual 18650 Battery (Sold Separately)
• Variable Wattage 5W–230W
• Temperature Control Mode
• Adaptive Power Function
• 0.96in TFT Colour Screen
• T-Air Subtank 2ml
• Push-Fit TA Mesh Coil System
• Honeycomb Top Airflow
• USB-C 2.0A Charging
• Zinc-Alloy Chassis with Leather Grip

What's in the Box

• 1 x Morph 3 Mod (Batteries Not Included)
• 1 x T-Air Subtank (2ml)
• 1 x TA 0.2 Ohms Coil (Pre-installed)
• 1 x TA 0.4 Ohms Coil (Spare)
• 1 x Replacement Glass
• 1 x USB-C Cable
• 1 x User Manual

Compatible With

• SMOK TA Series Mesh Coils (0.15 Ohms / 0.2 Ohms / 0.4 Ohms)

Recommended To Use With

• High-VG (70/30) Shortfill E-Liquids
• Freebase E-Liquids
• DTL (Direct-to-Lung) Vaping
• Restricted Direct-to-Lung (RDTL) on the 0.4 Ohms Coil or Tighter Airflow

FAQs

Does the SMOK Morph 3 come with batteries?

No. It runs on two 18650 batteries, which are sold separately. Use good-quality high-drain cells rated for the wattage you plan to vape at.

What e-liquid should I use?

High-VG shortfills (around 70/30) at low or zero nicotine suit the sub-ohm coils and direct-to-lung draw. Avoid 50/50 e-liquids and nic salts in a sub-ohm tank.

Do I need to prime a new coil?

Yes. When you fit a new coil, add e-liquid and let it soak for a few minutes before your first vape, which avoids a dry, burnt hit.

How often should I replace the coil?

Change it when the flavour starts to fade or tastes burnt, usually after one to two weeks depending on how much you vape and the e-liquid you use.

Is the Morph 3 suitable for beginners?

It is a 230W sub-ohm DTL kit built for experienced vapers who want big clouds and strong flavour. A first-time switcher is usually better starting with a smaller mouth-to-lung (MTL) pod kit.