OXVA NeXlim 2 Pod Vape Kit

The OXVA NeXlim 2 is a refillable pod kit designed for vapers who want more power and more control. It brings a 2000mAh built-in battery, adjustable power up to 40W and a 0.85 Inch colour screen, with two pods included, a 0.6 Ohms and a 0.8 Ohms, ready for either mouth-to-lung (MTL) or restricted direct-to-lung (RDTL) vaping straight out of the box.

It's the powerful one in the OXVA NeXlim range, an upgraded version of the original OXVA NeXlim with a 2000mAh battery, up from 1500mAh, 3A fast charging and UNITECH 3.0 pods that bring OXVA's Super Pulse system for denser vapour. You set the wattage, switch between two modes, and choose from three airflow levels, with the colour screen keeping everything clear.

Setup stays simple: you just fill the pod from the top, leave a new coil a few minutes to soak, then inhale to vape. The battery is built to see most vapers through a full day, and fast charging keeps downtime to a minimum for when it runs low.

It suits anyone who wants one kit that can switch between a tight MTL draw and an airy RDTL vape, with room to fine-tune. For a step up in performance with no fuss, the NeXlim 2 is a strong choice.

Fast-Charging 2000mAh Battery

The NeXlim 2 is fitted with a 2000mAh built-in battery. When it needs topping up, 5V/3A charging over USB Type-C reaches 80% in around 20 minutes, and there's a Type-C cable in the box.

UNITECH 3.0 Dual Mesh Pods

Both included pods pair a Dual Mesh coil with OXVA's Super Pulse system, heating your e-liquid evenly for consistent flavour.

• 0.6 Ohms (included) - an airier RDTL draw
• 0.8 Ohms (included) - a more traditional MTL vape
• 1.2 Ohms (sold separately) - a tighter, closer MTL draw

All three are top-fill, hold 2ml, and are best paired with 50/50 e-liquids or nic salts.

The UNITECH 3.0 design adds 3X enhanced anti-leak protection, and each cartridge is rated for up to 30 refills before it needs swapping.

Adjustable 5-40W Output

The NeXlim 2 gives you an adjustable 5-40W output, so you can match the wattage to your pod and how you like to inhale. Dial it up for warmer vapour, or ease it back for a tighter, cooler draw.

ECO & Boost Modes

ECO lowers the power to save battery and e-liquid. Boost delivers the full 40W for stronger flavour and denser vapour. Switch between the two with a quick press of the main button.

0.85 Inch Colour Display with 10 Themes

The 0.85 Inch colour screen keeps your settings visible, showing battery, wattage and current mode clearly.

You can choose from 10 display themes, three as standard with another seven to unlock, to personalise the look.

3-Level Precision Airflow

A side airflow control offers three settings. Close it down for a tight MTL draw, or open it up for an airier RDTL vape.

Colours

• Black Leather
• Black Warrior
• Bright Brown Leather
• Color Clash (Special)
• Green Leather
• Mocha Brown Leather
• Pearly White
• Shiny Pink
• Shiny Purple

Key Features

• Adjustable 5-40W Output
• ECO & Boost Modes
• 2000mAh Built-In Battery
• 3A Fast Charging (80% in ~20 Minutes)
• 0.85 Inch Colour Display with 10 Themes
• 3-Level Precision Airflow
• UNITECH 3.0 Dual Mesh Pods (0.6 + 0.8 Ohms Included)
• 3X Enhanced Anti-Leak
• Top-Fill 2ml Pods
• 9 Colours

What's in the Box

• 1 x OXVA NeXlim 2 Device
• 1 x 0.6 Ohms NeXlim UNITECH 3.0 Pod (2ml, pre-installed)
• 1 x 0.8 Ohms NeXlim UNITECH 3.0 Pod (2ml)
• 1 x Type-C Charging Cable
• 1 x User Manual

Compatible With

• NeXlim UNITECH 3.0 Cartridges (0.6 / 0.8 / 1.2 Ohms)

Recommended To Use With

• Nic Salt E-Liquids
• 50/50 E-Liquids
• MTL (Mouth-To-Lung)
• RDTL (Restricted Direct-To-Lung)

FAQs

What pods does the OXVA NeXlim 2 use?

The kit comes with two NeXlim UNITECH 3.0 pods, a 0.6 Ohms for an airier RDTL draw and a 0.8 Ohms for a more traditional MTL vape. A 1.2 Ohms cartridge is also available if you want a tighter MTL draw. Each pod is top-fill with a 2ml capacity.

How long does the battery last and how fast does it charge?

The 2000mAh built-in battery is built to last most vapers a full day. When it runs low, 5V/3A charging over USB Type-C reaches 80% in around 20 minutes.

How do I switch between ECO and Boost?

Press the main button in quick succession to switch between the two. ECO saves battery and e-liquid, while Boost gives you the full 40W for a stronger vape.

How long do the NeXlim pods last?

Each UNITECH 3.0 cartridge is rated for up to 30 refills, though how long it lasts depends on your e-liquid and how often you vape.

How do I fill and use the OXVA NeXlim 2?

Fill the pod from the top, leave a new coil a few minutes to soak, then inhale to vape. For the best flavour and coil life, use 50/50 or nic salt e-liquids.