GeekVape Sonder Q3 Pod Vape Kit

The Geekvape Sonder Q3 Pod Vape Kit is a draw-activated refillable pod kit built around a 1750mAh battery and Smart Mode power up to 30W, with a 0.8 Ohms Geekvape Q pod included. It handles both mouth-to-lung (MTL) and restricted direct-to-lung (RDTL) vaping from a 2ml refillable pod. There are no buttons and no settings to learn.

This is the third generation of the Sonder Q, and the battery is the part that's changed most. It's up from the 1350mAh of the Sonder Q2, and the charging current is up from 1A to 2A. What hasn't changed is the pod. The Sonder Q3 uses the same Geekvape Q Cartridges as the Q2 and the original Sonder Q, so if you already own a Sonder, your pods still fit.

Fill the pod, allow a few minutes for the coil to soak, then inhale. The airflow slider on the side lets you tighten the draw or open it up. The battery is good for a day for most people, depending on how often you vape, and the RGB light on the body shows where the charge sits.

The Sonder Q3 is made for beginners and ex-smokers who want something cheap and easy, and for Sonder Q or Q2 owners after a bigger battery and faster charging. It's one of the more affordable kits in our Geekvape collection, and with no menus or settings to worry about, the Sonder Q3 makes a lot of sense.

Powerful Battery

The Sonder Q3 is fitted with a 1750mAh built-in battery. When it runs low, USB-C fast charging at 5V/2A brings it back up quickly. A Type-C cable isn't included.

Smart Mode

Smart Mode sets the power for you. Slot in a pod and the device reads its resistance, then picks the right wattage to match, up to 30W.

Adjustable Airflow

A stepless airflow slider sits on the side of the device. Close it down for a tighter MTL draw or open it up for an airier RDTL vape, with room to fine-tune it anywhere in between.

Geekvape Q Pods

In the box you get one 2ml 0.8 Ohms Geekvape Q pod with an integrated mesh coil for consistent flavour and smooth vapour. The coil is not replaceable independently. When the pod is exhausted, swap in a fresh pod and carry on vaping.

The Q Cartridge range covers four resistances, and a different resistance changes the draw:

• 0.4 Ohms - the airiest, most open RDTL draw
• 0.6 Ohms - a warm, airy RDTL vape
• 0.8 Ohms - a smooth MTL draw (the included pod)
• 1.2 Ohms - a tighter MTL draw

Pair the pods with 50/50 e-liquids or nic salts for a smooth, cigarette-style inhale. High-VG e-liquids are too thick for these coils and will burn them out early.

RGB Light

An RGB light on the body shows your battery level at a glance, and you can set it to your choice of colour.

Colours

• Beat Black
• Beat Navy
• Beat Silver
• Groove Purple
• Groove Teal
• Groove Yellow
• Vibe Blue
• Vibe Orange
• Vibe Red

Key Features

• Refillable MTL and RDTL pod kit
• 1750mAh built-in battery
• Up to 30W Smart Mode auto wattage
• USB-C 5V/2A fast charging (cable not included)
• 0.8 Ohms Geekvape Q pod included
• 2ml refillable Q Cartridge
• Adjustable stepless airflow
• Draw-activated with no buttons
• RGB battery light with customisable colours
• Compatible with the full Geekvape Q Cartridge range

What's in the Box

• 1 x Geekvape Sonder Q3 Device
• 1 x Geekvape Q 0.8 Ohms Cartridge
• 1 x User Manual
• 1 x Battery Info Card

Compatible With

• Full Geekvape Q Cartridge range in 0.4 Ohms, 0.6 Ohms, 0.8 Ohms and 1.2 Ohms
• Pods are shared with the Sonder Q and Sonder Q2

Recommended To Use With

• Nic Salt E-Liquids
• 50/50 E-Liquids
• MTL Vaping
• RDTL Vaping