The GeekVape Aegis Nano 3 Vape Kit is a slim, stylish refillable pod kit designed for both a tight mouth-to-lung (MTL) draw and an airier restricted direct-to-lung (RDL) one. It is fitted with a 1600mAh battery, enough for all-day use, plus 5-30W of adjustable power and a 0.99-inch colour screen.
Compatible with the N Cartridge, it includes 2 pods with pre-installed coils: a 0.6 ohm for RDL, and a spare 1.2 ohm if you want a tighter MTL draw. Both use integrated mesh coils and pair well with 50/50 e-liquids and nic salts.
Smart Mode sets the wattage for you, to match the cartridge you have fitted, and the wattage can be adjusted for anyone who prefers taking control. Fire it with the button, or just draw on the mouthpiece.
The Nano 3 stays on the same N Cartridge platform as the original Aegis Nano and the Aegis Nano 2, so any N Cartridges you already have will fit it too.
Adjustable Top Airflow
With the stepless airflow control at the top of the device, you can fine-tune the Nano 3's draw for a tighter or looser pull, and it works on either cartridge.
30W Adjustable Power
The Aegis Nano 3 powers up to 30W. Smart Mode sets the wattage based on the resistance of the cartridge, or you can adjust the wattage yourself across the full 5-30W range. More power gives a warmer vape and a little more vapour; less keeps it cooler.
1600mAh Battery
Expect up to a full day of vaping from a charge. When the Aegis Nano 3 does run low, fast USB-C charging brings it to 80% in about 50 minutes and back to full in around an hour.
Dual Activation
Dual activation lets you choose between inhale activation or the fire button: hold the button down, or just take a draw as you would a cigarette. A lock function prevents accidental firing, handy for when the kit is in a pocket or bag.
Mesh N Cartridges
The mesh coil is built into each N Cartridge. There is no separate coil to change. Two included in the box:
- 0.6 Ohms - fitted, and set up for RDL vaping at around 20-25W
- 1.2 Ohms - the spare, for a tighter MTL draw at 9-14W
Both fill from the top: lift the cap under the mouthpiece and fill through the port, with the cartridge left in place. On a fresh cartridge, allow a few minutes for the coil to soak before your first draw. Plus, both resistances are also compatible with the original Aegis Nano and the Aegis Nano 2.
0.99-Inch Colour Screen
The vibrant 0.99-inch colour screen displays wattage, battery level, cartridge resistance, puff count and whether the lock is on. The resistance readout tells you at a glance which of the two cartridges is in.
Built To Last
The shell is metal, with a rubberised coating and a textured grip made for everyday knocks. At 90.85 x 34.79 x 26 mm, it is a small kit that still feels solid in the hand.
Colours
- Arctic Blue
- Jungle Green
- Midnight Dark
- Polar Silver
- Purple Bloom
- Sunset Red
Key Features
- 1600mAh battery
- 5-30W adjustable output
- Smart Mode and manual wattage adjustment
- MTL and RDL vaping
- 0.99-inch colour screen
- 0.6 Ohms and 1.2 Ohms N Cartridges included
- Adjustable top airflow
- Dual activation with lock function
- Six safety protections
- USB-C charging
What's in the Box
- 1 x GeekVape Aegis Nano 3 Device
- 1 x 0.6 Ohms N Cartridge
- 1 x 1.2 Ohms N Cartridge
- 1 x USB-C Cable
- 1 x User Manual
- 1 x Warning Card
Compatible With
- GeekVape N Cartridges in 0.6 Ohms and 1.2 Ohms
- GeekVape Aegis Nano and Aegis Nano 2, which use the same N Cartridges
Recommended To Use With
-
50/50 e-liquids and nic salts, which suit both cartridges
- 20mg nic salts for the tighter MTL draw on the 1.2 Ohms
- 10mg for the airier RDL draw on the 0.6 Ohms
FAQs
When should I replace the N Cartridge on the Aegis Nano 3?
The mesh coil is built into the cartridge, so you replace the whole cartridge rather than a separate coil. Change it when the flavour starts to fade or you get a burnt taste.
Will my Aegis Nano 2 cartridges fit the Nano 3?
Yes. The two cartridges in this box also fit the Aegis Nano 2 and the original Aegis Nano, so one set of cartridges covers all three devices.