Vaporesso Vape Pods

Shop Vaporesso vape pods, from refillable XROS COREX and Luxe replacement pods to the sealed prefilled Dojo Blast range, all part of the wider Vaporesso range. The XROS COREX pods fit right across the XROS series, while the Luxe pods cover the Luxe X, Luxe Q and Luxe QS systems, so there's a pod here to match whichever Vaporesso vape you own. Every pod is built on a mesh coil that keeps the flavour clean from the first fill to the last, with a leak-resistant design that stays tidy in the kit.

Choose refillable XROS COREX or Luxe pods to fill with your own nicotine salts or 50/50 e-liquid, or prefilled Dojo Blast pods for sealed flavour and no filling at all. COREX pods come in five resistances, from a tight mouth-to-lung draw down to an airy 0.4 Ohm for the higher-power XROS models, so check your device before you pick. Free UK delivery comes as standard on every order, with no minimum to spend.
Skip to results list
Brand
0 selected
Flavour
0 selected
Nicotine Strengths
0 selected
E-Liquid Capacity
0 selected
Fill Style
0 selected
Vaping Style
0 selected

    • Filters

    Brand
    Flavour
    Nicotine Strengths
    E-Liquid Capacity
    Fill Style
    Vaping Style

    Refillable Vaporesso pods

    Refillable Vaporesso pods take whatever e-liquid you like, then you swap the pod once the coil tires rather than buying a new kit, which keeps the ongoing cost down. We carry the replacement pods for the XROS series and the Luxe pod systems below. Other kits like the Eco Nano, GEN and Armour use their own coils or pods, so check the Vaporesso Replacement Coils range or the device's kit page for those.

    Vaporesso XROS COREX 3.0 pods

    The XROS COREX 3.0 pods are the official replacement pods for the full XROS series, from the original XROS up to the latest XROS 6. The step up to COREX 3.0 is Vaporesso's Hive Mesh, a finer heating wire that adds around 40% more heating area on the 0.6 Ohm pod, with Cumulus cotton that saturates faster and copes better as the liquid runs low, so the flavour stays cleaner for longer.

    • Pack of four, 2ml per pod
    • Built-in mesh coil, so you swap the whole pod, not a separate coil
    • Five resistances, 0.4 to 1.2 Ohms, tight to airy draws
    • SSS leak-resistant, top-fill design, so you refill without removing the pod

    Vaporesso Luxe X pods

    The Luxe X pods fit the Luxe X and Luxe X Pro only, and are not interchangeable with the Luxe Q pods below or with XROS. If you own a Luxe X or X Pro, these are the pods to reach for.

    • Pack of two, 2ml per pod
    • 0.4 and 0.8 Ohms integrated mesh
    • Magnetic connection, bottom-fill silicone port

    Vaporesso Luxe Q and QS pods

    The Luxe Q pods cover the Luxe Q and Luxe QS, along with the Luxe Q2 and Q2 SE, so one pod family suits the whole Luxe Q line. This is a different pod from the Luxe X above, so match it to your exact Luxe model before you buy.

    • 2ml per pod, built-in mesh coil
    • Four resistances, 0.6 to 1.2 Ohms
    • Top-fill, with airflow set by twisting the pod
    • Works with 50/50 or higher-PG e-liquid, nicotine salts or freebase

    Which resistance should I choose?

    The COREX pods cover five resistances, and the right one comes down to the draw you want:

    • 1.2 Ohms: the tightest mouth-to-lung (MTL) draw, a classic for ex-smokers.
    • 1.0 Ohms: tight MTL, close to a cigarette-style draw.
    • 0.8 Ohms: the standard MTL all-rounder, suiting most nicotine salts and 50/50 e-liquids.
    • 0.6 Ohms: a looser MTL or restricted direct-to-lung (RDTL) draw.
    • 0.4 Ohms: an airy RDTL or direct-to-lung (DTL) pod for high-VG e-liquid, on the higher-power XROS only (Pro, Pro 2 and the 4, 5 and 6 series).

    The Luxe Q pods follow the same 0.6 to 1.2 Ohm logic. Vaporesso's own DoJoLiq nic salts pair well across the MTL resistances if you want to keep it in the family.

    Prefilled Vaporesso pods: Dojo Blast

    Not everyone wants to fill their own. The Dojo Blast pods are sealed and prefilled, so there is no filling or topping up to think about, just a fresh pod when the last one runs out. The range spans the pocket-sized 2000 Go, the 6000, the 10k and the big-battery 30k Pro, with each pack pairing a 2ml prefilled pod and a refill container for a big-puff life between changes. The 30k Pro takes the same 10k pods, so its owners buy the 10k refills too. Flavours run across fruit, ice, soda, menthol and tobacco. Browse the full Vaporesso Dojo Blast range for the flavour list and the prefilled multi-buy deals.

    Which pod fits your kit?

    Find your device below for the pod it takes, then use the resistance guide above to pick the draw and e-liquid that suit you. Check your exact model before you buy.

    Your kit Pod to use
    XROS series, from the original XROS up to the latest XROS 6 (plus Mini, Nano, Cube, Pro and Pro 2) XROS COREX 3.0 pods
    Luxe X, Luxe X Pro Luxe X pods
    Luxe Q, Luxe QS, Q2, Q2 SE Luxe Q pods
    Dojo Blast 10k and Dojo Blast 30k Pro Dojo Blast 10k prefilled pods
    Dojo Blast 6000 Dojo Blast 6000 prefilled pods

    Refilling and replacing your pod

    Topping up a refillable pod takes seconds:

    1. Snap off the mouthpiece to reveal the fill port.
    2. Fill the silicone port with your e-liquid.
    3. Click the mouthpiece back on, with no need to take the pod out of the kit.
    4. On the first fill, let it stand for around ten minutes so the cotton saturates before you vape.

    When the taste fades or turns burnt, the cotton inside has worn down, so it is time to swap the pod. The kit sets the wattage automatically through its chipset, so there is nothing to dial in.

    The prefilled Dojo Blast pods need none of this. Once a pod is empty, swap in a fresh one and carry on.

    Frequently asked questions

    How long does a Vaporesso pod last?

    Most pods last around a week, and up to ten days, though this varies with how often you vape and the e-liquid you use. Sweeter, darker flavours tend to shorten coil life, and switching flavours often can too.

    Why does my pod taste burnt?

    A burnt taste usually means the cotton has dried out. It happens if the pod has run low on e-liquid, if you vape it hard without letting it rewick, or simply because the pod has reached the end of its life and needs swapping.

    Do XROS pods leak?

    The COREX pods use Vaporesso's SSS leak-resistant construction, so leaks are uncommon in normal use. If you do notice any seepage, check that the mouthpiece is clicked firmly back on after filling, as a loose mouthpiece is the usual cause.

    Are XROS COREX 2.0 and 3.0 pods interchangeable?

    They share the same five resistances and the same XROS kit compatibility, so the same device rules apply to both, including the 0.4 Ohm needing a higher-power XROS. COREX 3.0 is the newer upgrade and the version we stock, built on the Hive Mesh and Cumulus cotton changes for cleaner, longer-lasting flavour.