{"title":"Vape Coils","description":"\u003cp\u003eShop replacement vape coils for every setup, from tight \u003ca href=\"\/collections\/mouth-to-lung-vape-coils\" title=\"Mouth-to-lung vape coils\"\u003emouth-to-lung (MTL) coils\u003c\/a\u003e to \u003ca href=\"\/collections\/direct-to-lung-vape-coils\" title=\"Direct-to-lung vape coils\"\u003esub-ohm coils built for direct-to-lung (DTL) clouds\u003c\/a\u003e. A coil is the heating element inside every tank and pod, the part that turns your e-liquid into vapour, and it wears out with use, so it needs replacing regularly before the flavour dulls.\u003c\/p\u003e\n\n\u003cp\u003eYou will find every major coil family here: RPM and Nord coils for SMOK pod kits, Z coils for the Innokin Zenith family, Nautilus coils for Aspire tanks and Z Series mesh for the Geekvape Zeus, alongside Voopoo PnP, Uwell Caliburn and Freemax replacements. No single coil fits every device, so stick to your kit's own coil family, then pick the resistance for the draw you want.\u003c\/p\u003e\n\n\u003c!-- split --\u003e\n\n\u003ch3\u003eWhat is a vape coil?\u003c\/h3\u003e\n\u003cp\u003eA vape coil, sometimes called a coil head or atomiser, is a wire or mesh strip wrapped in cotton wicking, seated inside the tank or pod itself. Every vape has three parts, the battery, the \u003ca href=\"\/collections\/tanks\" title=\"Vape tanks\"\u003etank\u003c\/a\u003e or pod, and the coil, and it is the coil that turns your e-liquid into vapour.\u003c\/p\u003e\n\u003cp\u003eFire the device and the coil heats the e-liquid held in its wick, turning it into vapour, while the cotton soaks up more from the tank between puffs. That constant heating is why coils burn out, and because the coil is a replaceable part, you swap the coil alone and keep the tank and kit around it.\u003c\/p\u003e\n\n\u003ch3\u003eOhms and resistance: which coil should I choose?\u003c\/h3\u003e\n\u003cp\u003eOhms measure the coil's electrical resistance, and that number sets how much vapour it makes and how much power it needs. The real decision, though, is your draw style. As a rough rule of thumb, a mouth-to-lung device wants a coil above about 0.7 Ohms, while a direct-to-lung device wants one below about 0.4 Ohms. Coils in between give a restricted direct-to-lung (RDTL) draw, a middle ground between the two: the Innokin Z range, for instance, is tagged for both MTL and RDTL vaping. The table below sorts the two main families, and once you have picked, match your liquid to it from our \u003ca href=\"\/collections\/nicotine-salt-e-liquids\" title=\"Nicotine salt e-liquids\"\u003enicotine salt e-liquids\u003c\/a\u003e and \u003ca href=\"\/collections\/shortfill-e-liquids\" title=\"Shortfill e-liquids\"\u003eshortfill e-liquids\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cdiv class=\"comp-table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eResistance band\u003c\/th\u003e\n\u003cth\u003eDraw style\u003c\/th\u003e\n\u003cth\u003eLiquid pairing\u003c\/th\u003e\n\u003cth\u003eVapour\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbove about 0.7 Ohms (MTL)\u003c\/td\u003e\n\u003ctd\u003eTight, cigarette-style mouth-to-lung\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50\u003c\/td\u003e\n\u003ctd\u003eLess, cooler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBelow about 0.4 Ohms (sub-ohm)\u003c\/td\u003e\n\u003ctd\u003eOpen, direct-to-lung\u003c\/td\u003e\n\u003ctd\u003eHigher-VG, around 70% VG\u003c\/td\u003e\n\u003ctd\u003eMore, warmer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eLower resistance heats faster and hotter and needs more power, which is why every coil carries a recommended wattage band. Fixed-output kits are matched to their coil by design and most modern adjustable kits detect the resistance for you, but if you can set the wattage, stay inside the printed band.\u003c\/p\u003e\n\n\u003ch3\u003eMesh coils vs standard coils\u003c\/h3\u003e\n\u003cp\u003eA standard coil is a single wound wire. A mesh coil replaces that with a thin metal net, which puts far more surface area against the wick. It heats more of your liquid at once and warms up evenly, so you get cleaner, more consistent flavour and more vapour. Mesh comes in both MTL and sub-ohm forms, and most of the coils here are mesh. There is also one ceramic option, the SMOK Nord 1.4 Ohms Ceramic, which wicks through porous ceramic rather than cotton.\u003c\/p\u003e\n\n\u003ch3\u003eWhich coil fits my kit?\u003c\/h3\u003e\n\u003cp\u003eThere is no universal coil. Each coil family is built for the tank or pod it ships with, so a SMOK Vape Pen 22 will not accept an Aspire coil. The good news is that most brands make their coils cross-compatible within their own range, so several Innokin Z coils fit more than one Innokin kit.\u003c\/p\u003e\n\n\u003cp\u003eStart with your brand: browse \u003ca href=\"\/collections\/smok-coils\" title=\"SMOK coils\"\u003eSMOK coils\u003c\/a\u003e, \u003ca href=\"\/collections\/aspire-coils\" title=\"Aspire coils\"\u003eAspire coils\u003c\/a\u003e, \u003ca href=\"\/collections\/geekvape-coils\" title=\"Geekvape coils\"\u003eGeekvape coils\u003c\/a\u003e and \u003ca href=\"\/collections\/innokin-coils\" title=\"Innokin coils\"\u003eInnokin coils\u003c\/a\u003e, and check the coil is listed for your exact device before you buy.\u003c\/p\u003e\n\n\u003ch3\u003eHow often should I change my coil?\u003c\/h3\u003e\n\u003cp\u003eHow long a coil lasts in a vape depends on how much you vape, the e-liquid you choose and the wattage you vape at. As a rough guide:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy vaper, on the kit right through the day: every four to six days\u003c\/li\u003e\n\u003cli\u003eMedium vaper, vaping regularly: up to fourteen days\u003c\/li\u003e\n\u003cli\u003eLight or social vaper: up to three weeks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou will know a coil is on the way out when the flavour fades, a burnt edge creeps in and the vapour drops off. MTL coils generally outlast direct-to-lung coils, simply because they use less power.\u003c\/p\u003e\n\n\u003ch3\u003ePriming a new vape coil\u003c\/h3\u003e\n\u003cp\u003eA fresh coil needs to soak before its first draw, or the wick scorches and you get that burnt taste. Drip a little e-liquid straight into the wicking holes on the side of the coil, fit it, fill the tank and leave it to stand for around five minutes so the cotton saturates fully. Then start at a low power and work up until the vape feels right.\u003c\/p\u003e\n\n\u003cp\u003eFor a pod it is simpler: fill it, leave it to settle for a few minutes, and give it a moment again each time you refill.\u003c\/p\u003e\n\n\u003ch3\u003eVape coil FAQs\u003c\/h3\u003e\n\n\u003ch4\u003eWhy is my new coil burnt on the first draw?\u003c\/h4\u003e\n\u003cp\u003eThree things usually cause it. The coil was not primed, so the wick was still dry. The power is set too high for the coil's resistance. Or the e-liquid has run low and the wick is no longer staying wet. Prime it before you vape, keep the wattage inside the coil's band, and top up before the tank gets too low.\u003c\/p\u003e\n\n\u003ch4\u003eWhy is my vape leaking?\u003c\/h4\u003e\n\u003cp\u003eUsually it is one of three things: the tank is overfilled, so fill it to about two thirds and leave the air gap; the coil is not seated squarely; or a filling port has been left open. Check each one and a leak normally clears.\u003c\/p\u003e\n\n\u003ch4\u003eWhich resistance do I need for my device?\u003c\/h4\u003e\n\u003cp\u003eStart with what the kit was built for. If a coil came in the box, buy the same resistance again. Otherwise check which coil family your device takes, then pick a higher resistance for a tight mouth-to-lung inhale or a lower one for open sub-ohm clouds.\u003c\/p\u003e\n\n\u003ch4\u003eDo mesh coils last longer?\u003c\/h4\u003e\n\u003cp\u003eUsually, yes. Because the mesh heats evenly across its whole surface, there are no hot spots to scorch the wick early, so a mesh coil tends to hold its flavour and outlast a standard wire coil.\u003c\/p\u003e\n\n\u003ch4\u003eCan I clean a vape coil instead of replacing it?\u003c\/h4\u003e\n\u003cp\u003eNot really, for the replacement coils sold here. The wick is fixed inside the coil head, so once the cotton is burnt the flavour does not come back, and the fix is a fresh coil. Dry-burn cleaning only applies to rebuildable coils, where the wick comes out first.\u003c\/p\u003e\n\n\u003ch4\u003eWhy has my e-liquid gone dark in the tank?\u003c\/h4\u003e\n\u003cp\u003eIt is usually nothing to worry about. Over time, heat, light and air darken e-liquid, and a used coil speeds it up. If the flavour has turned with it, fit a fresh coil or pod and the taste comes back.\u003c\/p\u003e","products":[{"product_id":"aspire-pockex-replacement-coils","title":"Aspire PockeX Replacement Coils","description":"\u003cp\u003eThe Aspire PockeX Replacement Coils give you a choice of two different resistances: a \u003cstrong\u003e0.6 Ohms stainless steel\u003c\/strong\u003e coil and a \u003cstrong\u003e1.2 Ohms KA1\u003c\/strong\u003e coil, sold in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. Both are Aspire U-Tech coils, designed to deliver rich flavour and impressive vapour production.\u003c\/p\u003e\n\u003cp\u003eThere are no wattage settings on the PockeX, so the resistance is the one choice you make. You change a coil from the top, with no need to take the whole tank apart.\u003c\/p\u003e\n\u003ch4\u003eThe Two Draws\u003c\/h4\u003e\n\u003cp\u003eThe 0.6 Ohms coil gives a restricted direct-to-lung (RDL) draw, warmer and denser, and works best with high VG e-liquid. The 1.2 Ohms coil is made for mouth-to-lung (MTL) vaping, with a tighter cigarette-style draw, and it is ideal for use with 50\/50 freebase e-liquid or nic salts. Aspire's recommended wattage is 18-20W for the 0.6 Ohms and 10-12W for the 1.2 Ohms.\u003c\/p\u003e\n\u003ch4\u003eTwo Kits, One Coil\u003c\/h4\u003e\n\u003cp\u003eThese coils are designed for use with the Aspire PockeX. They are also compatible with the PockeX Box kit.\u003c\/p\u003e\n\u003ch4\u003eBefore the First Vape\u003c\/h4\u003e\n\u003cp\u003eUnscrew the top cap, take the old coil out and screw a new one in. Fill the tank, then leave the new coil a few minutes before you vape it, which helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eWill These Fit an Aspire Nautilus?\u003c\/h4\u003e\n\u003cp\u003eNo. PockeX and Nautilus X coils are built on the same U-Tech technology, but they are not interchangeable in either direction. Every Nautilus tank is on a Nautilus coil range instead.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.6 Ohm","offer_id":32368852566051,"sku":"Aspir-PockeX-Coil-0.6-Ohm","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm","offer_id":32368852598819,"sku":"Aspir-PockeX-Coil-1.2-Ohm","price":12.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/aspire-pockex-coils-vape-superstore_2_600x600_449e9d80-ffeb-48d3-8742-98cb72e34d5c.jpg?v=1662806705"},{"product_id":"aspire-bvc-replacement-coils","title":"Aspire BVC Replacement Coils","description":"\u003cp\u003eAspire BVC Replacement Coils fit Aspire's clearomizers, and come in a pack of \u003cstrong\u003e5\u003c\/strong\u003e in either \u003cstrong\u003e1.6 Ohms\u003c\/strong\u003e or \u003cstrong\u003e1.8 Ohms\u003c\/strong\u003e. BVC is Aspire's bottom vertical coil design. Both resistances are mouth-to-lung (MTL) coils, with the tight, cigarette-like draw these tanks were built for.\u003c\/p\u003e\n\u003cp\u003eThese coils are made for 50\/50 freebase, high PG and nic salt e-liquid. Replacement coils for an older Aspire clearomizer are still easy to find.\u003c\/p\u003e\n\u003ch4\u003eAspire Clearomizers and Kits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTanks - the ET, ET-S and ET-S Glass, K1, K1 Plus, K2 and K Lite, CE5 and CE5-S, Vivi Nova, Vivi Nova-S and Mini Vivi Nova-S, and the Maxi\u003c\/li\u003e\n\u003cli\u003eKits - the K1 Stealth, the K2 Quick Start Kit and the Spryte AIO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eNot for the Nautilus\u003c\/h4\u003e\n\u003cp\u003ePlease note: Aspire's Nautilus tanks use the BVC name too, but they are not compatible with these coils. For a Nautilus you need the \u003ca href=\"\/products\/aspire-nautilus-replacement-coils\" title=\"Aspire Nautilus Replacement Coils\"\u003eAspire Nautilus Replacement Coils\u003c\/a\u003e. The K3 tank, despite the K-series name, is on the Nautilus coil range as well.\u003c\/p\u003e\n\u003ch4\u003eCleaner-Tasting BVC Build\u003c\/h4\u003e\n\u003cp\u003eThe BVC head is designed for a cleaner taste, with more vapour and longer coil life. It is the upgraded design for these tanks, replacing Aspire's older BDC coils. Simply unscrew the base of the tank, screw a new coil in and refill.\u003c\/p\u003e\n\u003ch4\u003eVolts or Watts\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eBest vaped at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.6 Ohms\u003c\/td\u003e\n\u003ctd\u003e6 - 11W, or 3.0V to 4.2V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.8 Ohms\u003c\/td\u003e\n\u003ctd\u003e9 - 13W, or 4.2V to 5.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEach resistance is paired with its own voltage, which means the 1.8 Ohms is rated for the higher wattage as well. Use whichever figure your device shows.\u003c\/p\u003e\n\u003ch4\u003eCan I use these coils in an Aspire Spryte AIO?\u003c\/h4\u003e\n\u003cp\u003eYes. The Spryte AIO's own 1.8 Ohms coil is interchangeable with the regular 1.6 Ohms and 1.8 Ohms BVC coils. The kit is rated at 12W and its output is not regulated, so the power drops as the battery depletes. The 1.8 Ohms is the resistance best suited to that rating.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"1.6 Ohm","offer_id":32368852860963,"sku":"Aspir-BVCBottomVert-Coil-1.6-Ohm","price":8.95,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohm","offer_id":32368852893731,"sku":"Aspir-BVCBottomVert-Coil-1.8-Ohm","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/aspire_bvc_replacement_coils_-_accessories_-_coils_-_tanks_-_vape_superstore_uk.jpg?v=1668953500"},{"product_id":"aspire-cleito-pro-replacement-coils","title":"Aspire Cleito Pro Replacement Coils","description":"\u003cp\u003eAspire Cleito Pro Replacement Coils are available in two resistances, and both coils are best vaped at 60W or more: the \u003cstrong\u003e0.5 Ohms\u003c\/strong\u003e at wattages between \u003cstrong\u003e60 - 80W\u003c\/strong\u003e, and the \u003cstrong\u003e0.15 Ohms Mesh\u003c\/strong\u003e at \u003cstrong\u003e60 - 75W\u003c\/strong\u003e. Each is available in a \u003cstrong\u003epack of 5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese are direct-to-lung (DTL) coils, best paired with a high VG e-liquid for dense vapour and full flavour.\u003c\/p\u003e\n\u003ch4\u003eFits Three Cleito Tanks\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour tank\u003c\/th\u003e\n\u003cth\u003eThe coils that fit\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAspire Cleito Pro (standard or TPD version)\u003c\/td\u003e\n\u003ctd\u003e0.5 Ohms and 0.15 Ohms Mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAspire Cleito\u003c\/td\u003e\n\u003ctd\u003e0.5 Ohms and 0.15 Ohms Mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAspire Cleito EXO\u003c\/td\u003e\n\u003ctd\u003e0.5 Ohms and 0.15 Ohms Mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAspire Cleito 120 and Cleito 120 Pro\u003c\/td\u003e\n\u003ctd\u003eNot compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAspire's Cleito coils are also compatible with the Cleito Pro and the Cleito EXO. Please note: these coils are not compatible with the Cleito 120 or the Cleito 120 Pro. Our \u003ca href=\"\/products\/aspire-cleito-120-replacement-coils\" title=\"Aspire Cleito 120 Replacement Coils\"\u003eAspire Cleito 120 Replacement Coils\u003c\/a\u003e are designed for those two tanks.\u003c\/p\u003e\n\u003ch4\u003eSetting the Wattage\u003c\/h4\u003e\n\u003cp\u003eThese coils need a variable wattage mod that can be set to 60W or higher. They are not temperature control coils. TC mode cannot be used with them.\u003c\/p\u003e\n\u003cp\u003eAspire's Cleito Coil 0.4 Ohms is best vaped at a lower wattage, between 40 - 60W, and it fits the Cleito Pro as well. You will find it on our \u003ca href=\"\/products\/aspire-cleito-replacement-coils\" title=\"Aspire Cleito Replacement Coils\"\u003eAspire Cleito Replacement Coils\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch4\u003eHow Long Does a Cleito Pro Coil Last?\u003c\/h4\u003e\n\u003cp\u003eCoil life will vary depending on the wattage you choose and how often you vape. You can expect four to six days of all-day vaping from a coil, up to two weeks of regular use, or up to three weeks with light use. Cleito coils are known for their longevity, and two to three weeks from a single coil is common.\u003c\/p\u003e\n\u003ch4\u003eDoes It Matter If My Cleito Pro Is the Standard or the TPD Version?\u003c\/h4\u003e\n\u003cp\u003eNo. Both coils are compatible with either version. The TPD version has a 2ml capacity and the standard version 3ml, or 4.2ml with the larger glass tube fitted, and both are supplied with a 0.5 Ohms coil and a 0.15 Ohms Mesh coil in the box.\u003c\/p\u003e\n\u003cp\u003ePlease note: the Cleito EXO also has a 0.16 Ohms coil of its own. It is too big to fit the 2ml Cleito Pro tank, so it suits the standard version only.\u003c\/p\u003e\n","brand":"Aspire","offers":[{"title":"0.15 Ohm - (Mesh)","offer_id":32368891166755,"sku":"Aspir-CleitoPro-Coil-0.15-Ohm-Mesh","price":15.95,"currency_code":"GBP","in_stock":true},{"title":"0.5 Ohm - Kanth","offer_id":40540060090403,"sku":"Aspir-CleitoPro-Coil-0.5-Ohm-Kanth","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/aspire-cleito-pro-replacement-coils.jpg?v=1668965489"},{"product_id":"aspire-breeze-replacement-coils","title":"Aspire Breeze\/Breeze 2 Replacement Coils","description":"\u003cp\u003eThe Aspire Breeze \/ Breeze 2 Replacement Coils are a \u003cstrong\u003e0.6 Ohms\u003c\/strong\u003e SS316L for the Breeze and the Breeze 2, and a \u003cstrong\u003e1.0 Ohms\u003c\/strong\u003e for the Breeze 2, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eBoth the Breeze and the Breeze 2 have an output range of 9-25W and no wattage settings to adjust. Choose the coil to suit your Breeze and your e-liquid.\u003c\/p\u003e\n\u003ch4\u003eAspire's Coil Pairings\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour Breeze\u003c\/th\u003e\n\u003cth\u003eE-liquid\u003c\/th\u003e\n\u003cth\u003eAspire's coil\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreeze\u003c\/td\u003e\n\u003ctd\u003eNormal e-liquid\u003c\/td\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreeze\u003c\/td\u003e\n\u003ctd\u003eNicotine salts or a high nicotine strength\u003c\/td\u003e\n\u003ctd\u003e1.2 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreeze 2\u003c\/td\u003e\n\u003ctd\u003eNormal e-liquid\u003c\/td\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBreeze 2\u003c\/td\u003e\n\u003ctd\u003eNicotine salts\u003c\/td\u003e\n\u003ctd\u003e1.0 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eEither Breeze Kit\u003c\/h4\u003e\n\u003cp\u003eThe 0.6 Ohms is compatible with both the original Breeze and the Breeze 2, and it is recommended for use with both. The 1.0 Ohms is compatible with the original Breeze as well. Aspire recommends it for the Breeze 2.\u003c\/p\u003e\n\u003cp\u003ePlease note: these are not the coils for a Breeze NXT. The Breeze NXT coils are made specifically for the Breeze NXT and are not compatible with the Breeze or the Breeze 2.\u003c\/p\u003e\n\u003ch4\u003eChanging a Breeze 2 Coil\u003c\/h4\u003e\n\u003cp\u003eTo replace the coil on a Breeze 2, remove the drip tip, then unscrew and pull out the chimney unit. The coil sits on the airflow control ring, so lift the old one out and replace it with the new coil before screwing the chimney unit back into the pod. With the drip tip off, you can rotate that same ring to adjust the airflow and fine-tune how tight or open the draw feels.\u003c\/p\u003e\n\u003ch4\u003eWhy is the 0.6 Ohms paired with normal e-liquid?\u003c\/h4\u003e\n\u003cp\u003eUsing nicotine salts on the 0.6 Ohms coil or normal e-liquid on the 1.2 Ohms means the performance may not be satisfactory. Each coil is at its best with the e-liquid it is recommended for.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.6 Ohm","offer_id":32368908795939,"sku":"Aspir-Breeze\/2-Coil-0.6-Ohm","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":40571665121315,"sku":"Aspir-Breeze\/2-Coil-1.0-Ohm-Nic","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/aspire-breeze-2-coils_grand.jpg?v=1668969623"},{"product_id":"aspire-cleito-replacement-coils","title":"Aspire Cleito Replacement Coils","description":"\u003cp\u003eThe Aspire Cleito Replacement Coils are available in four resistances: \u003cstrong\u003e0.4 Ohms, 0.27 Ohms, 0.2 Ohms and 0.15 Ohms\u003c\/strong\u003e. The 0.15 Ohms is Aspire's mesh coil in the range. All four are designed for sub-ohm vaping and come in a \u003cstrong\u003epack of 5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEach coil has its own power range, and between them they cover 40W up to 75W. All four are direct-to-lung (DTL) coils. We advise using a high VG e-liquid across the range.\u003c\/p\u003e\n\u003ch4\u003eThe Cleito Coil Range\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAspire's coil name\u003c\/th\u003e\n\u003cth\u003eBest vaped at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleito Coil 0.4 Ohms\u003c\/td\u003e\n\u003ctd\u003e40 - 60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleito Coil 0.27 Ohms\u003c\/td\u003e\n\u003ctd\u003e40 - 55W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleito Coil 0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e55 - 70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleito Pro Coil 0.15 Ohms Mesh\u003c\/td\u003e\n\u003ctd\u003e60 - 75W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePick the resistance that matches the wattage you want to vape at.\u003c\/p\u003e\n\u003ch4\u003eThe Mesh Option\u003c\/h4\u003e\n\u003cp\u003eMesh is the only build name in this family, and the 0.2, 0.27 and 0.4 Ohms are sold by resistance alone. Aspire's own name for the 0.15 Ohms is a Cleito Pro coil, so a pack can arrive marked Pro rather than Cleito. That is a naming difference and not a fitment one, and the \u003ca href=\"\/products\/aspire-cleito-pro-replacement-coils\" title=\"Cleito Pro coils\"\u003eCleito Pro coils\u003c\/a\u003e are built on the same Aspire coil platform as the rest of the range.\u003c\/p\u003e\n\u003ch4\u003eThe Tanks They Fit\u003c\/h4\u003e\n\u003cp\u003eThese coils are designed for use with the Cleito, Cleito EXO and Cleito Pro tanks. The range is cross-compatible: the standard Cleito coils are compatible with the EXO and the Pro, and the Cleito Pro coils are compatible with the Cleito and the EXO. The 0.27 Ohms is also compatible with the Cleito tank on the K4 battery.\u003c\/p\u003e\n\u003cp\u003ePlease note: these coils are not compatible with the Cleito 120 or the Cleito 120 Pro, and the 120 coils are not compatible with the Cleito, EXO or Pro either. Those two tanks use the \u003ca href=\"\/products\/aspire-cleito-120-replacement-coils\" title=\"Cleito 120 coils\"\u003eCleito 120 coils\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eCan I Use a 50\/50 or Nic Salt E-Liquid?\u003c\/h4\u003e\n\u003cp\u003eNo. These are sub-ohm coils for direct-to-lung vaping, and every power range on this page is 40W or higher. A 50\/50 blend or a nic salt is not suitable for any of the four.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.15 Ohm - Mesh","offer_id":32368909352995,"sku":"Aspir-Cleito-Coil-0.15-Ohm","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm","offer_id":32368909320227,"sku":"Aspir-Cleito-Coil-0.4-Ohm","price":12.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/aspire_cleito_coils_-_accessories_-_coils_-_tanks.jpg?v=1662804201"},{"product_id":"aspire-cleito-120-replacement-coils","title":"Aspire Cleito 120 Replacement Coils","description":"\u003cp\u003eAspire Cleito 120 Replacement Coils are the Cleito 120's wide-bore chimney as well as its coil, for increased airflow. Each pack contains one coil, and they are available in a choice of two builds: a \u003cstrong\u003e0.16 Ohms\u003c\/strong\u003e Clapton coil best vaped at \u003cstrong\u003e100 - 120W\u003c\/strong\u003e, and a \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e Mesh coil best vaped at \u003cstrong\u003e60 - 75W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eBoth coils use an organic cotton wick. Each delivers a direct-to-lung (DTL) vape, so pair them with high VG e-liquids of 70% VG or more for dense vapour and full flavour.\u003c\/p\u003e\n\u003ch4\u003eTwo Different Wattage Ranges\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003e0.16 Ohms Clapton\u003c\/th\u003e\n\u003cth\u003e0.15 Ohms Mesh\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAspire's name\u003c\/td\u003e\n\u003ctd\u003eCleito 120 Coil\u003c\/td\u003e\n\u003ctd\u003eCleito 120 Pro Coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild\u003c\/td\u003e\n\u003ctd\u003eClapton wire\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest vaped at\u003c\/td\u003e\n\u003ctd\u003e100 - 120W\u003c\/td\u003e\n\u003ctd\u003e60 - 75W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 0.16 Ohms is best suited to a mod you can set between 100W and 120W. Check your device reaches that before you choose it.\u003c\/p\u003e\n\u003cp\u003eYou can expect the 0.15 Ohms Mesh to last longer at its lower wattage than the 0.16 Ohms does at 100 - 120W. When you fit a new coil, fill the tank and allow a few minutes for the coil to soak, which helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eThe Two Cleito 120 Tanks\u003c\/h4\u003e\n\u003cp\u003eBoth coils are compatible with the Aspire Cleito 120 and the Aspire Cleito 120 Pro. Any kit built around one of those two tanks uses the same coils. Please note: these coils are not compatible with the original Aspire Cleito tank, which uses our \u003ca href=\"\/products\/aspire-cleito-replacement-coils\" title=\"Aspire Cleito replacement coils\"\u003eAspire Cleito replacement coils\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eIs the 0.15 Ohms Mesh the Same as the Cleito Pro Coil?\u003c\/h4\u003e\n\u003cp\u003eNo. This one is Aspire's Cleito 120 Pro coil, made for the Cleito 120 and the Cleito 120 Pro. Aspire makes a 0.15 Ohms mesh coil for the Cleito Pro as well, at the same 60 - 75W, and that one is made for the Cleito, the Cleito Pro and the Cleito EXO. Match the coil to the tank in its name, and for a Cleito Pro or a Cleito EXO the coils you need are on our \u003ca href=\"\/products\/aspire-cleito-pro-replacement-coils\" title=\"Aspire Cleito Pro replacement coils\"\u003eAspire Cleito Pro replacement coils\u003c\/a\u003e page.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.15 Ohm - Mesh","offer_id":40575852085283,"sku":"Aspir-Cleito120-Coil-0.15-Ohm-Mesh","price":3.49,"currency_code":"GBP","in_stock":true},{"title":"0.16 Ohm - Clapton","offer_id":40575852118051,"sku":"Aspir-Cleito120-Coil-0.16-Ohm-Mesh","price":3.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/Aspire-Cleito-120-Replacement-Coil.jpg?v=1725915354"},{"product_id":"aspire-avp-pro-replacement-coils","title":"Aspire AVP Pro Replacement Coils","description":"\u003cp\u003eThe Aspire AVP Pro Replacement Coils are available in either a \u003cstrong\u003e0.65 Ohms Mesh\u003c\/strong\u003e coil or a \u003cstrong\u003e1.15 Ohms Standard\u003c\/strong\u003e coil, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. Both are compatible with the AVP Pro, AVP-CUBE, Tekno, 9th tank and Zero.G. The Tekno comes with two pods, and these coils are designed for use with its AVP pod.\u003c\/p\u003e\n\u003cp\u003eThe coil sits inside the AVP Pro pod cartridge, so when performance drops off you replace the coil rather than the whole pod. Both the 1.15 Ohms Standard and the 0.65 Ohms Mesh are KA1 coils.\u003c\/p\u003e\n\u003ch4\u003eWhich Coil to Choose\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.65 Ohms Mesh - best vaped at wattages between 15 - 18W, with more vapour and a warmer vape, for a looser mouth-to-lung (MTL) draw through to restricted direct-to-lung (RDL) vaping. Ideal for 50\/50 freebase e-liquid, and suitable for nic salts.\u003c\/li\u003e\n\u003cli\u003e1.15 Ohms Standard - best vaped at wattages between 10 - 16W for MTL vaping, ideal for use with nic salts or 50\/50 e-liquid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith either coil in place, the AVP Pro's adjustable airflow slider lets you tailor the draw to your liking: close it down for a tighter MTL draw or open it up for an airier one. Fit the 1.15 Ohms Standard and you can switch between the AVP Pro's four selectable power modes, 10W, 12W, 14W and 16W. Please note: the wattage is adjustable with coil resistances of 1.0 Ohms or higher, so both the AVP Pro and the AVP-CUBE automatically set the output mode to bypass for the 0.65 Ohms Mesh. The Tekno supports 1 - 30W and the Zero.G 5 - 40W in increments of 1W, so with both you can set 15 - 18W for the 0.65 Ohms Mesh yourself.\u003c\/p\u003e\n\u003ch4\u003eDevices They Do Not Fit\u003c\/h4\u003e\n\u003cp\u003eThese coils are not compatible with the Aspire AVP AIO, the original AVP, which has built-in coil pods, so you replace the whole pod instead.\u003c\/p\u003e\n\u003ch4\u003eDo I need to prime a new coil?\u003c\/h4\u003e\n\u003cp\u003eYes. Fill the pod, then wait for 5 minutes to allow the e-liquid to soak into the coil before your first puff. This helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eHow long do these coils last?\u003c\/h4\u003e\n\u003cp\u003eWith regular use, a coil typically lasts one to two weeks, depending on how often you vape. Thicker high-VG e-liquid in the 1.15 Ohms can affect wicking and shorten coil life.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.65 Ohm - Mesh","offer_id":32368937893923,"sku":"Aspir-AVPPro-Coil-0.65-Ohm-Mesh","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"1.15 Ohm - Standard","offer_id":32368937926691,"sku":"Aspir-AVPPro-Coil-1.15-Ohm-Stand","price":9.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/AVP-Pro-Replacement-Coils-By-Aspire.jpg?v=1663519108"},{"product_id":"aspire-bp60-replacement-coils","title":"Aspire BP60 Replacement Coils","description":"\u003cp\u003eThe Aspire BP Replacement Coils are designed for both mouth-to-lung (MTL) and direct-to-lung (DTL) vaping, and are supplied \u003cstrong\u003ein a pack of 5\u003c\/strong\u003e with a simple push-fit installation. The 1.0 Ohms is best vaped at \u003cstrong\u003e10-16W\u003c\/strong\u003e and the 0.15 Ohms Meshed at \u003cstrong\u003e60-80W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe BP60 pod kit is equipped with the 0.3 Ohms Mesh coil and the 0.6 Ohms coil, and has a variable wattage range of 1-60W. Its side-access airflow control allows you to tailor the draw to your liking. The same coils are used with the wider Aspire BP range, not just the BP60.\u003c\/p\u003e\n\u003ch4\u003eWhich Coils Fit Which Aspire Kit or Tank\u003c\/h4\u003e\n\u003cp\u003eThe Aspire BP80, the Finixx pod tank, the BP Stik and BP Stik Pod, the Veynom Air, Veynom EX and Veynom LX, and the Rhea X are compatible with the 0.17, 0.3, 0.6 and 1.0 Ohms. The Nautilus Prime X comes with two pods, and it is the BP pod rather than the Nautilus one that is compatible with all four. The Tekno also has a BP pod, which is compatible with the 0.6 and 1.0 Ohms only. The BP coils are designed for use with the following tanks and kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAspire BP60 - 0.17, 0.3, 0.6 and 1.0 Ohms\u003c\/li\u003e\n\u003cli\u003eOnixx kit and Onixx tank - 0.6 and 1.0 Ohms only\u003c\/li\u003e\n\u003cli\u003eRevolto, Huracan EX and Huracan LX - the meshed 0.15, 0.17 and 0.3 Ohms\u003c\/li\u003e\n\u003cli\u003eHuracan Mini - the meshed 0.4, plus the 0.6 and 1.0 Ohms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: the Nautilus pod inside a Prime X is not compatible with a BP coil, and uses \u003ca href=\"\/products\/aspire-nautilus-replacement-coils\" title=\"Aspire Nautilus coils\"\u003eAspire Nautilus coils\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eFrom 10W to 80W\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eDraw\u003c\/th\u003e\n\u003cth\u003ePair with\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.0 Ohms\u003c\/td\u003e\n\u003ctd\u003e10-16W\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003ctd\u003enic salts or 50\/50 freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003e15-25W\u003c\/td\u003e\n\u003ctd\u003eMTL and restricted direct-to-lung (RDTL)\u003c\/td\u003e\n\u003ctd\u003ehigh PG or 50\/50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4 Ohms Meshed\u003c\/td\u003e\n\u003ctd\u003e25-35W\u003c\/td\u003e\n\u003ctd\u003eRDL\u003c\/td\u003e\n\u003ctd\u003ehigh VG, 70% or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3 Ohms Meshed\u003c\/td\u003e\n\u003ctd\u003e30-40W\u003c\/td\u003e\n\u003ctd\u003eRDTL to DTL\u003c\/td\u003e\n\u003ctd\u003ehigh VG, 70% or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.17 Ohms Meshed\u003c\/td\u003e\n\u003ctd\u003e45-55W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003ctd\u003ehigh VG, 70% or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.15 Ohms Meshed\u003c\/td\u003e\n\u003ctd\u003e60-80W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003ctd\u003ehigh VG, 70% or more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eAspire's Double-Shot Coil\u003c\/h4\u003e\n\u003cp\u003eThe 0.6 Ohms is a double-shot coil, which is a dual coil rather than a mesh one. Aspire builds the 0.17 and 0.3 Ohms as Meshed coils, and the 0.6 and 1.0 Ohms as standard BP coils. The dual coil in the 0.6 Ohms gives you the full flavour, while the meshed 0.3 Ohms delivers intense flavour and dense vapour. Both are FeCrAl coils.\u003c\/p\u003e\n\u003ch4\u003eHow long does an Aspire BP coil last?\u003c\/h4\u003e\n\u003cp\u003eAspire recommends a new coil every five to seven days, and every two to three weeks if you vape only occasionally. The signs are a burnt taste, less vapour, or a gurgling noise.\u003c\/p\u003e\n\u003cp\u003eTo get the most from each one, add a few drops of e-liquid to a new coil and allow a few minutes for the coil to soak. That helps to prevent dry hits. After that, avoid chain vaping and use the recommended wattage for the resistance you are using.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between BP and BP-F coils?\u003c\/h4\u003e\n\u003cp\u003eAspire also makes a BP-F coil, which is only compatible with the Revolto, Revolto S and H2 tank. The coils on this page are BP coils, compatible with a wider range of Aspire kits. The Revolto is compatible with both, so check whether you need BP or BP-F before selecting one.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.15 Ohm - Mesh","offer_id":57398311944565,"sku":"Aspir-BP60-Coil-0.15-Ohm-Mesh","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"0.17 Ohm - Mesh","offer_id":40575843827747,"sku":"Aspir-BP60-Coil-0.17-Ohm-Mesh","price":12.95,"currency_code":"GBP","in_stock":false},{"title":"0.3 Ohm - Mesh","offer_id":32943802875939,"sku":"Aspir-BP60-Coil-0.3-Ohm-Mesh","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm - Mesh","offer_id":57398311977333,"sku":"Aspir-BP60-Coil-0.4-Ohm-Mesh","price":12.95,"currency_code":"GBP","in_stock":false},{"title":"0.6 Ohm","offer_id":32943802908707,"sku":"Aspir-BP60-Coil-0.6-Ohm-Mesh","price":12.95,"currency_code":"GBP","in_stock":false},{"title":"1.0 Ohm","offer_id":40575843860515,"sku":"Aspir-BP60-Coil-1.0-Ohm-Mesh","price":12.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/aspire-bp60-replacement-coils_2.jpg?v=1668956456"},{"product_id":"innokin-zenith-replacement-coils","title":"Innokin Zenith Coils - Replacement Coils","description":"\u003cp\u003eInnokin's Zenith coils are now sold as Z coils, with the same coils inside and the same \u003cstrong\u003epack of 5\u003c\/strong\u003e, now available in \u003cstrong\u003eeight resistances from 0.3 Ohms up to 1.6 Ohms\u003c\/strong\u003e. One coil fits the Zenith and Zlide tanks.\u003c\/p\u003e\n\u003cp\u003eThe 0.3, 0.48, 0.5 and 0.6 Ohms are mesh coils and the 0.8, 1.0, 1.2 and 1.6 Ohms are standard KA1 coils, though the 0.3, 0.8, 1.2 and 1.6 Ohms are now available in an upgraded Mesh V2 build as well. Only the 0.3 Ohms mesh coil is designed for a restricted direct-to-lung (RDL) draw. The 0.48, 0.5 and 0.6 Ohms are mouth-to-lung (MTL) coils, and the whole range is suited to 50 to 70 percent VG e-liquid.\u003c\/p\u003e\n\u003ch4\u003eThe Eight Z Coils\u003c\/h4\u003e\n\u003cp\u003eThe 0.3, 0.48 and 0.5 Ohms work best with higher-VG e-liquid, and the 0.6 Ohms with 50\/50:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.3 Ohms mesh - 30-40W - a looser restricted direct-to-lung draw\u003c\/li\u003e\n\u003cli\u003e0.48 Ohms Plex3D mesh - 13-16W - mouth-to-lung\u003c\/li\u003e\n\u003cli\u003e0.5 Ohms Plexus mesh - 14-19W - mouth-to-lung\u003c\/li\u003e\n\u003cli\u003e0.6 Ohms DuoPrime dual mesh - 9-13W - mouth-to-lung at lower power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe standard KA1 coils, which give the tighter and warmer draws:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.8 Ohms KA1 - 15-18W - a warmer mouth-to-lung\u003c\/li\u003e\n\u003cli\u003e1.0 Ohms KA1 - 20-25W - restricted direct-to-lung, or a warm mouth-to-lung\u003c\/li\u003e\n\u003cli\u003e1.2 Ohms KA1 - 10-14W - mouth-to-lung\u003c\/li\u003e\n\u003cli\u003e1.6 Ohms KA1 - 9-12W - a tight, cigarette-like mouth-to-lung\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 1.0 Ohms is the exception. Innokin designed it for restricted direct-to-lung vaping or a warm mouth-to-lung, which is why it needs more power than the tighter KA1 coils. The 1.2 and 1.6 Ohms suit 50\/50 freebase and nic salts, and the 1.6 Ohms is made for nicotine salt e-liquids specifically.\u003c\/p\u003e\n\u003ch4\u003ePlex3D Flavour Mesh\u003c\/h4\u003e\n\u003cp\u003eThe 0.48 Ohms is built on Innokin's Plex3D, a 3D mesh that increases the coil's surface area for a faster ramp up, with wood pulp and cotton wicking inside the coil. The 0.5 Ohms Plexus mesh is best vaped at wattages between 14 - 19W for a slightly warmer vape, and both coils are built for flavour and longevity.\u003c\/p\u003e\n\u003ch4\u003eWhat It Fits\u003c\/h4\u003e\n\u003cp\u003eThe Z coil fits the whole Zenith and Zlide line, plus the Coolfire kits and vape pens built around those tanks, though the Coolfire Z Air is compatible with the 0.8, 1.2 and 1.6 Ohms. The MVP5 also carries a dedicated Z-Coil preset: fit a Zenith or Zlide tank, select Z-Coil, and the device sets the optimal range for you. These are the tanks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZenith, Zenith II, Zenith Pro and Zenith II Pro\u003c\/li\u003e\n\u003cli\u003eZenith NEX, Zenith D22 and Zenith M\u003c\/li\u003e\n\u003cli\u003eZlide and Zlide Top\u003c\/li\u003e\n\u003cli\u003eGo Z, Go Z Disposable Tank, GO Z+ and GO Z NEX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd these kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoolfire Z50, Z60, Z80 Zenith II, Z80 Nex and Z Air\u003c\/li\u003e\n\u003cli\u003eCoolfire Mini Zenith D22\u003c\/li\u003e\n\u003cli\u003eAdept Zlide and Kroma-A Zenith\u003c\/li\u003e\n\u003cli\u003eGo Z Pen, GOZEE, GOZEE NEX, Kroma-Z, Zlide Tube and EZ Tube Zenith M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Go Z tank is supplied with a 1.6 Ohms coil and is compatible with the 0.6, 0.8, 1.0 and 1.2 Ohms as well, so the 0.3, 0.48 and 0.5 Ohms are not compatible with it. The Go Z Pen has a fixed 13W output and a 0.6 to 3.5 Ohms resistance range, and it is compatible with the 0.6 Ohms and up. The Zlide Tube has a 0.4 to 3.0 Ohms resistance range and a 13W or 16W output, so it is not compatible with the 0.3 Ohms.\u003c\/p\u003e\n\u003cp\u003ePlease note: the 0.3 Ohms mesh coil is not compatible with the Innokin Adept, and none of these coils are compatible with devices built for Innokin ZF coils, which are a separate sub-ohm coil range. Check the coil your kit uses before selecting a resistance.\u003c\/p\u003e\n\u003ch4\u003eAre Innokin Zenith coils and Z coils the same?\u003c\/h4\u003e\n\u003cp\u003eYes. Boxes marked Zenith coils and boxes marked Z coils have the same coils inside, and Z coils have replaced Zenith coils entirely. Plexus-Z is an older box name for the same coil. Only the name has changed.\u003c\/p\u003e\n\u003ch4\u003eHow long does an Innokin Z coil last?\u003c\/h4\u003e\n\u003cp\u003eHow long a Z coil lasts depends on how often you vape, which resistance you have fitted and the e-liquid you pair with it. Change it when the flavour drops off or the vape starts to taste burnt. Priming a new coil and keeping the tank topped up above the coil both help.\u003c\/p\u003e\n\u003ch4\u003eHow do I change an Innokin Z coil?\u003c\/h4\u003e\n\u003cp\u003eUnscrew the tank base, remove the old coil, fit the new one, and fill with your e-liquid. Leave it to stand for a few minutes so the liquid can soak into the wicking. That soak is what prevents dry hits when a coil is new.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"0.3 Ohm","offer_id":40578793144355,"sku":"Innok-ZenithCoils-Coil-0.3-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.48 Ohm","offer_id":40578793177123,"sku":"Innok-ZenithCoils-Coil-0.48-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.5 Ohm","offer_id":40578793209891,"sku":"Innok-ZenithCoils-Coil-0.5-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm","offer_id":40578793242659,"sku":"Innok-ZenithCoils-Coil-0.6-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":32370238521379,"sku":"Innok-ZenithCoils-Coil-0.8-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":32370238554147,"sku":"Innok-ZenithCoils-Coil-1.0-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm","offer_id":32370238586915,"sku":"Innok-ZenithCoils-Coil-1.2-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.6 Ohm","offer_id":32370238619683,"sku":"Innok-ZenithCoils-Coil-1.6-Ohm","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/innokin-zenith-replacement-coils-8.jpg?v=1668958834"},{"product_id":"innokin-scion-plexus-replacement-coils","title":"Innokin Scion Plexus Replacement Coils","description":"\u003cp\u003eThe Innokin Scion Plexus Replacement Coils are mesh coils in \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e, rated at \u003cstrong\u003e60-110W\u003c\/strong\u003e. The \u003cstrong\u003e0.36 Ohms\u003c\/strong\u003e in the range is the Scion quad coil, rated at \u003cstrong\u003e80-150W\u003c\/strong\u003e. They are sold in a \u003cstrong\u003epack of 3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese are sub-ohm coils, designed for direct-to-lung (DTL) vaping and best paired with a high VG e-liquid of 70% or more. They are compatible with the Scion, Scion II and Plex tanks. All three tanks feature adjustable airflow, so you can tailor the draw to your liking.\u003c\/p\u003e\n\u003ch4\u003eSet the Wattage\u003c\/h4\u003e\n\u003cp\u003eEach of the two coils has its own recommended wattage, and the kits built around these tanks range from a maximum output of 100W up to 235W.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMaximum output\u003c\/th\u003e\n\u003cth\u003eInnokin kits\u003c\/th\u003e\n\u003cth\u003eRecommended coils\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 100W\u003c\/td\u003e\n\u003ctd\u003ePlexar Plex, MVP4 Scion\u003c\/td\u003e\n\u003ctd\u003ethe 0.15 Ohms from 60W, or the 0.36 Ohms from 80W to 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 110W\u003c\/td\u003e\n\u003ctd\u003eOceanus Scion\u003c\/td\u003e\n\u003ctd\u003ethe 0.15 Ohms across its full 60-110W, or the 0.36 Ohms from 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUp to 235W\u003c\/td\u003e\n\u003ctd\u003eProton Plex, Proton 235W x Scion II\u003c\/td\u003e\n\u003ctd\u003eboth coils, with the 0.36 Ohms across its full 80-150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 0.36 Ohms is compatible with every kit above. On a 100W kit you can set the wattage from 80W to 100W, on a 110W kit from 80W to 110W, and a 235W mod gives you the full 80-150W.\u003c\/p\u003e\n\u003ch4\u003ePlexus Mesh Coil Life\u003c\/h4\u003e\n\u003cp\u003eThe Plexus mesh coils are designed for a longer coil life. They are fitted with an organic cotton wick. When filling the tank for the first time, allow the coil to soak for a few minutes. This helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eWhere the Names Overlap\u003c\/h4\u003e\n\u003cp\u003eThe Plexar Plex uses the same Plex tank. These coils fit that kit too. Innokin's own coil for the Plexar is the Scion Plex3D 0.14 Ohms, so check which resistance you need.\u003c\/p\u003e\n\u003ch4\u003eWhen should I change a Scion Plexus coil?\u003c\/h4\u003e\n\u003cp\u003eMost vapers notice a burnt taste on the inhale, and the flavour fades before that. How long you get depends on how high you set the wattage and how often you vape. We recommend changing the coil as soon as the flavour starts to fade.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"0.15 Ohm","offer_id":32370244026403,"sku":"Innok-ScionPlexus-Coil-0.15-Ohm","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"0.36 Ohm","offer_id":32370244059171,"sku":"Innok-ScionPlexus-Coil-0.36-Ohm","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/innokin-scion-plexus-coils.jpg?v=1668957019"},{"product_id":"innokin-endura-t18-replacement-coils","title":"Innokin Endura T18 Replacement Coils","description":"\u003cp\u003eThe Innokin Endura T18 Replacement Coils are fitted with KA1 wire and a Japanese organic cotton wick for maximum flavour. They are made for the Endura T18 and Endura T22 kits and the Prism T18 and Prism T22 tanks, and are supplied in a pack of 5. Available in either a \u003cstrong\u003e1.5 Ohms\u003c\/strong\u003e or a \u003cstrong\u003e2.0 Ohms\u003c\/strong\u003e resistance, both for \u003cstrong\u003emouth to lung (MTL)\u003c\/strong\u003e vaping.\u003c\/p\u003e\n\u003cp\u003eBoth kits are optimised for a 14W output, with the 1.5 Ohms pre-installed. Either resistance suits 50\/50 freebase and nic salt e-liquids, or any high PG blend. The 2.0 Ohms is the higher resistance, with less vapour.\u003c\/p\u003e\n\u003ch4\u003eThe Longer Prism Coil\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eKit or tank you own\u003c\/th\u003e\n\u003cth\u003eCoil it uses\u003c\/th\u003e\n\u003cth\u003eResistances\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEndura T18 kit, Prism T18 tank\u003c\/td\u003e\n\u003ctd\u003eThese Prism T18 coils\u003c\/td\u003e\n\u003ctd\u003e1.5 Ohms or 2.0 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEndura T22 kit, Prism T22 tank\u003c\/td\u003e\n\u003ctd\u003eThese Prism T18 coils\u003c\/td\u003e\n\u003ctd\u003e1.5 Ohms or 2.0 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEndura T18E, T18 Pro, T18 II, T18 II Mini, T18-X, T22E, T22 Pro, M18\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/innokin-endura-t18e-replacement-coils\" title=\"Innokin Endura T18E Replacement Coils\"\u003eInnokin Endura T18E Replacement Coils\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 Ohms, 1.6 Ohms Mesh or 1.7 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThis coil measures 4.1cm and the T18E coil 3.3cm, so T18E coils do not fit a T18 or T22 tank.\u003c\/p\u003e\n\u003ch4\u003eHow long should a Prism T18 coil last?\u003c\/h4\u003e\n\u003cp\u003eThicker high-VG liquids affect wicking and shorten coil life, so 50\/50 freebase and nic salts suit these coils best. Prime a new coil and allow a few minutes to soak before your first draw. This helps protect the coil. When the flavour starts to fade, replace it.\u003c\/p\u003e\n\u003ch4\u003eDo these coils fit the Endura T18 II?\u003c\/h4\u003e\n\u003cp\u003eNo. The T18 II uses the T18E coil, and so do the T18 II Mini and the T18-X. All three are made for the 3.3cm T18E coil, so these 4.1cm Prism T18 coils are not compatible with them.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"1.5 Ohm","offer_id":32370280005667,"sku":"Innok-EnduraT18-Coil-1.5-Ohm","price":7.45,"currency_code":"GBP","in_stock":false},{"title":"2.0 Ohm","offer_id":32370280038435,"sku":"Innok-EnduraT18-Coil-20-Ohm","price":7.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/innokin_prism_t18_-_coils.jpg?v=1668963069"},{"product_id":"innokin-endura-t18e-replacement-coils","title":"Innokin Endura T18E Replacement Coils","description":"\u003cp\u003eThe Innokin Endura T18E Replacement Coils are cross-compatible coils for a wide range of Innokin kits and tanks, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. Available in three resistance options: a \u003cstrong\u003e1.5 Ohms\u003c\/strong\u003e, a \u003cstrong\u003e1.6 Ohms Mesh\u003c\/strong\u003e and a \u003cstrong\u003e1.7 Ohms Pro\u003c\/strong\u003e, each of them for \u003cstrong\u003emouth to lung (MTL)\u003c\/strong\u003e vaping.\u003c\/p\u003e\n\u003cp\u003eThese are Innokin's award-winning Prism coils, one part for the whole T18E and T22E line. We advise using a 50\/50 or high PG e-liquid, nic salts included. The draw is closer to a cigarette.\u003c\/p\u003e\n\u003ch4\u003eWhat Each Coil Is For\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore vapour and a smoother draw\u003c\/td\u003e\n\u003ctd\u003e1.6 Ohms Mesh\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe standard draw\u003c\/td\u003e\n\u003ctd\u003e1.5 Ohms\u003c\/td\u003e\n\u003ctd\u003eKA1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLess vapour\u003c\/td\u003e\n\u003ctd\u003e1.7 Ohms Pro\u003c\/td\u003e\n\u003ctd\u003eKA1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 1.5 Ohms is best vaped at 12 to 14 watts and the 1.7 Ohms Pro at 11.5 to 13.5 watts. The Mesh has a larger surface area for a smoother vape.\u003c\/p\u003e\n\u003ch4\u003eAcross the Endura Range\u003c\/h4\u003e\n\u003cp\u003eThese are the coils for the Endura T18E, T18 Pro, T18 II, T18 II Mini, T18-X, T22E and T22 Pro kits, the M18 pod kit, and the Prism T18E, Prism T18E Pro, T18 II and T22E tanks.\u003c\/p\u003e\n\u003ch4\u003eWill these fit an Endura T18 or T22?\u003c\/h4\u003e\n\u003cp\u003eNo. The Endura T18 and T22 use Innokin's longer Prism T18 coil. A T18 or T22 tank is built for a 4.1cm coil and this one measures 3.3cm, so they are not compatible with each other.\u003c\/p\u003e\n\u003ch4\u003eCan I use these in an Innokin M18?\u003c\/h4\u003e\n\u003cp\u003eYes. The M18 can also use the T18E coil, for those who prefer the original Endura experience. The M18 has its own BVC coil, and the T18E is a second option for that kit.\u003c\/p\u003e\n","brand":"Innokin","offers":[{"title":"1.5 Ohm","offer_id":32370283970595,"sku":"Innok-EnduraT18E-Coil-1.5-Ohm","price":6.95,"currency_code":"GBP","in_stock":true},{"title":"1.6 Ohm - Mesh","offer_id":40578775023651,"sku":"Innok-EnduraT18E-Coil-1.6-Ohm","price":6.95,"currency_code":"GBP","in_stock":true},{"title":"1.7 Ohm - Pro","offer_id":32370284003363,"sku":"Innok-EnduraT18E-Coil-1.7-Ohm","price":6.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/Endura-T18E-Coils---5-Pack-By-Innokin_600x600_5c0be0f4-830b-43b6-af31-638f2f68276f.jpg?v=1662807364"},{"product_id":"innokin-jem-replacement-coils","title":"Innokin JEM Replacement Coils","description":"\u003cp\u003eThe Innokin JEM Replacement Coils are a direct replacement for the coil in your JEM Pen, and there are two to choose from: a \u003cstrong\u003e1.6 Ohms\u003c\/strong\u003e KA1 coil and a \u003cstrong\u003e2.0 Ohms\u003c\/strong\u003e Ceramic coil. Both are supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe JEM Pen is a mouth-to-lung (MTL) vape pen, and both coils are built for that draw. They work best with high-PG e-liquid, 50% PG or more, or with nicotine salts.\u003c\/p\u003e\n\u003ch4\u003eOptimised at 13W\u003c\/h4\u003e\n\u003cp\u003eThese coils are optimised for the JEM Pen's output and give full, intense flavour with every puff. The JEM Pen has a 13W constant output, so on that kit there is nothing to adjust. The JEM\/Goby gives you a choice of five power settings, from 10W up to 13.5W, along with adjustable airflow.\u003c\/p\u003e\n\u003ch4\u003eFive Minutes to Prime\u003c\/h4\u003e\n\u003cp\u003eEmpty your tank before you change the coil. Turn the pen upside down, unscrew the base and remove the old coil. Screw a new one in, reattach the base and fill the tank. On the first fill, leave it to stand for five minutes before vaping so the coil can soak up the e-liquid, which helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eWhen the Flavour Drops\u003c\/h4\u003e\n\u003cp\u003eKeeping the tank topped up helps extend the life of the coil. A burnt taste, or less flavour and vapour than the coil gave when it was new, means it is time to replace it.\u003c\/p\u003e\n\u003ch4\u003eThe JEM Pen, Tank and Goby\u003c\/h4\u003e\n\u003cp\u003eThese are compatible with the Innokin JEM Pen, as well as the 510 JEM tank and the JEM\/Goby.\u003c\/p\u003e\n\u003ch4\u003eKA1 and Ceramic\u003c\/h4\u003e\n\u003cp\u003eThe 1.6 Ohms KA1 coil gives you plenty of vapour. The 2.0 Ohms Ceramic gives the more cigarette-like experience of the two. Whichever suits you best is the one to choose here.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"1.6 Ohm","offer_id":32370294849571,"sku":"Innok-JemCoils-Coil-1.6-Ohm","price":9.49,"currency_code":"GBP","in_stock":true},{"title":"2.0 Ohm","offer_id":32370294882339,"sku":"Innok-JemCoils-Coil-20-Ohm","price":9.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/innokin-jem-replacement-coils.jpg?v=1668963040"},{"product_id":"innokin-prism-s-replacement-coils","title":"Innokin Prism S Replacement Coils","description":"\u003cp\u003eKeep your Endura T20S performing at its best with the Innokin Prism S Replacement Coils, available in \u003cstrong\u003e0.8 Ohms\u003c\/strong\u003e, \u003cstrong\u003e0.9 Ohms Mesh\u003c\/strong\u003e and \u003cstrong\u003e1.5 Ohms\u003c\/strong\u003e. Each pack contains five, and they are compatible with Innokin's EZ.WATT and Endura Apex as well.\u003c\/p\u003e\n\u003cp\u003eEach one is a KA1 coil with a 510 pin, housed with organic cotton for clean flavour. The Endura kits they fit are aimed at people moving away from cigarettes, so mouth-to-lung (MTL) is what the range is built around, with the 0.8 Ohms opening up into a restricted direct-to-lung (RDTL) draw.\u003c\/p\u003e\n\u003ch4\u003eFlavour or a Tighter Draw\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e0.8 Ohms at 16-18W - a more open draw than the other two, and it suits an RDTL style vape on a 50\/50.\u003c\/li\u003e\n\u003cli\u003e0.9 Ohms Mesh at 14.5-18W - Innokin's mesh coil, and the one to choose for flavour: an MTL draw with more vapour than the other two, on a 50\/50 or nic salts.\u003c\/li\u003e\n\u003cli\u003e1.5 Ohms at 13-14W - the tighter, more cigarette-like end of the range, best paired with nic salts or a high-PG 50\/50.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFits the T20S, EZ.WATT and Apex\u003c\/h4\u003e\n\u003cp\u003eAll three resistances are compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInnokin Endura T20S Kit\u003c\/li\u003e\n\u003cli\u003eInnokin Prism T20S Tank\u003c\/li\u003e\n\u003cli\u003eInnokin EZ.WATT\u003c\/li\u003e\n\u003cli\u003eInnokin Endura Apex - the kit arrives with the 0.8 Ohms and the 0.9 Ohms Mesh, so add the 1.5 Ohms for a tighter draw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrism S coils are not compatible with the Endura T18, T18E, T18E Pro, T20 or T22.\u003c\/p\u003e\n\u003ch4\u003eNo-Spill Coil Swap\u003c\/h4\u003e\n\u003cp\u003eInnokin's no-spill coil swap keeps a coil change clean. Unscrew the base of the tank, remove the old coil and screw a new one in - there is no need to empty the tank first. Let it sit for a few minutes so the e-liquid can soak into the cotton, which prevents a burnt hit. When the flavour drops, change the coil - that is what the other four in the pack are for.\u003c\/p\u003e\n\u003ch4\u003eCan I use high-VG e-liquid in a Prism S coil?\u003c\/h4\u003e\n\u003cp\u003eNo. The three Prism S coils work between 13 and 18W, and a high-VG shortfill is too thick to soak into the wicking properly at that power, which gives you dry hits instead of flavour. Nic salts and 50\/50 e-liquid are what these coils are built for.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"0.8 Ohm","offer_id":32370299895843,"sku":"Innok-PrismST20S-Coil-0.8-Ohm","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.9 Ohm - Mesh Pro","offer_id":40578783379491,"sku":"Innok-PrismST20S-Coil-0.9-Ohm-Mesh","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.5 Ohm","offer_id":32370299928611,"sku":"Innok-PrismST20S-Coil-1.5-Ohm","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/innokin-prism-t20-replacement-coils.jpg?v=1668959506"},{"product_id":"innokin-ajax-replacement-coils","title":"Innokin Ajax Replacement Coils","description":"\u003cp\u003eThe Innokin Ajax Replacement Coils are designed exclusively for use with the Innokin Ajax tank. They are supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e and are available in either a \u003cstrong\u003e0.16 Ohms\u003c\/strong\u003e coil rated for \u003cstrong\u003e50-80W\u003c\/strong\u003e or a \u003cstrong\u003e0.35 Ohms\u003c\/strong\u003e coil rated for \u003cstrong\u003e30-55W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eBoth are direct-to-lung (DTL) coils. The 0.35 Ohms gives a cooler, smoother vape at lower wattages. The 0.16 Ohms gives more vapour output and a warmer vape at higher power. High VG e-liquid, 70VG\/30PG or higher, suits either resistance. Sub-ohm vaping is best paired with the low-level 3mg and 6mg nicotine strengths.\u003c\/p\u003e\n\u003ch4\u003eAjax Tank Only\u003c\/h4\u003e\n\u003cp\u003eAn Ajax coil is only compatible with the Innokin Ajax tank. That tank is included with the Innokin MVP5 Ajax (5200mAh, 6-120W), the Innokin Proton Mini Ajax (3400mAh, 6-120W) and the Innokin Kroma-R Ajax (6-80W). The Kroma-R Ajax is powered by a single 18650 battery.\u003c\/p\u003e\n\u003cp\u003ePlease note: all three kits are also compatible with Innokin's Zenith and Zlide tanks, and those tanks are not compatible with Ajax coils. If your tank is a Zenith or a Zlide, you need the \u003ca href=\"\/products\/innokin-zenith-coils-replacement-coils\" title=\"Innokin Zenith Coils - Replacement Coils\"\u003eInnokin Zenith Coils - Replacement Coils\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eInnokin's iSub-B coils use the Plex3D name as well and include a 0.35 Ohms, and that coil is not compatible with the Ajax tank. Check your device before selecting.\u003c\/p\u003e\n\u003ch4\u003eNext Generation Plex3D Matrix\u003c\/h4\u003e\n\u003cp\u003eBoth coils use Plex3D mesh, and the 0.16 Ohms is the next generation Plex3D Matrix. The mesh heats the e-liquid more evenly across a larger surface area, for a faster ramp up and bold flavour. Plex3D's even heating means fewer dry hits as well.\u003c\/p\u003e\n\u003ch4\u003eCan I use an Innokin Z coil in the Ajax tank?\u003c\/h4\u003e\n\u003cp\u003eNo. Z coils are made for the Zenith and Zlide tanks, and the Ajax tank is only compatible with Ajax coils. The MVP5 has a separate power preset for each of the two platforms, so the coils you need follow the tank you are using, not the mod.\u003c\/p\u003e\n\u003ch4\u003eHow long does an Innokin Ajax coil last?\u003c\/h4\u003e\n\u003cp\u003eLower wattages extend coil life, so the 0.35 Ohms at 30-55W will usually last longer than the 0.16 Ohms at 50-80W. High VG e-liquid is thicker, and a thicker or sweeter blend can affect wicking and shorten coil life on either resistance. With a new coil, allow a few minutes after filling for the e-liquid to soak into the wicking before your first puff.\u003c\/p\u003e\n\u003ch4\u003eWhat wattage should I use with Ajax coils?\u003c\/h4\u003e\n\u003cp\u003eUse the 0.16 Ohms at 50-80W and the 0.35 Ohms at 30-55W. On the MVP5 Ajax, select Ajax and the device automatically sets the wattage and range for you. On the Proton Mini Ajax, the Kroma-R Ajax or another 510 mod, set the wattage manually to suit the coil you are using.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"0.16 Ohm","offer_id":32370417696803,"sku":"Innok-Ajax-Coil-0.16-Ohm","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.35 Ohm","offer_id":32370417729571,"sku":"Innok-Ajax-Coil-0.35-Ohm","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/Ajax-Replacement-Coils-by-Innokin.jpg?v=1668963072"},{"product_id":"freemax-maxluke-904l-x-replacement-coils","title":"Freemax Maxluke 904L X Replacement Coils","description":"\u003cp\u003eThe Freemax 904L X Replacement Coils are available in a \u003cstrong\u003esingle mesh X1\u003c\/strong\u003e, a \u003cstrong\u003edual mesh X2\u003c\/strong\u003e and a \u003cstrong\u003etriple mesh X3\u003c\/strong\u003e. Both the X1 and the X3 are \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e, while the X2 is the \u003cstrong\u003e0.5 Ohm\u003c\/strong\u003e option. They come in a \u003cstrong\u003epack of five\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThey are made for the Freemax Fireluke M, Fireluke 2, Fireluke 3 and Fireluke 4 tanks, and for direct-to-lung (DTL) sub-ohm vaping, best used with a high VG e-liquid, 70\/30 or higher. The coils feature a screw-in installation into the base of the tank. Once filled, allow the coil a few minutes to saturate. This helps prevent dry hits and a burnt taste from a new coil.\u003c\/p\u003e\n\u003ch4\u003eRated Wattage\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e40-80W, best around 70W - the X1 (0.15 Ohms, single mesh)\u003c\/li\u003e\n\u003cli\u003e50-90W, best around 80W - the X3 (0.15 Ohms, triple mesh)\u003c\/li\u003e\n\u003cli\u003e20-50W, best around 45W - the X2 (0.5 Ohms, dual mesh)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe X1 works best around 70W, so choose the X3 for more power or the X2 0.5 Ohms for less. Please note: the 904L X line has two X2 coils, one at 0.2 Ohms and one at 0.5 Ohms, so check the resistance as well as the code.\u003c\/p\u003e\n\u003ch4\u003eFreemax's Other Fireluke Coils\u003c\/h4\u003e\n\u003cp\u003eThe Fireluke M, 2, 3 and 4 are compatible with three different Freemax coil lines, and these 904L X coils are the FM CoilTech 4.0 build, which includes the X1, X2, X3 and X4. The X Mesh line is the FM CoilTech 5.0 and 2.0 build, with the X1-D, X1, X2, NX2, X3 and X4, while the TX Mesh line uses a diamond-pattern mesh in the TX1, TX2, TNX2, TX3 and TX4. Two of the three lines use the same X numbers. Look for 904L X on the pack.\u003c\/p\u003e\n\u003ch4\u003eFireluke M, 2, 3 and 4\u003c\/h4\u003e\n\u003cp\u003eThese coils are designed for use with the following Fireluke tanks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFreemax Fireluke M Tank\u003c\/li\u003e\n\u003cli\u003eFreemax Fireluke 2 Tank\u003c\/li\u003e\n\u003cli\u003eFreemax Fireluke 3 Tank (the Maxluke)\u003c\/li\u003e\n\u003cli\u003eFreemax Fireluke 4 Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Twister 80W and Twister 2 80W kits are also compatible. Please note: the 904L X coils do not fit the Fireluke Solo, which uses Freemax's FL Mesh coils, or the Fireluke 22, which has its own mesh coils. The M Pro, M Pro 2 and M Pro 3 tanks, and the Maxus 200W kits fitted with them, use \u003ca href=\"\/products\/freemax-904l-m-mesh-coils-mesh-pro-m-pro-2-uk-stock-new-arrival\" title=\"904L M coils\"\u003e904L M coils\u003c\/a\u003e instead. X and M coils are not interchangeable.\u003c\/p\u003e\n\u003ch4\u003eAre X1-D coils part of the 904L X line?\u003c\/h4\u003e\n\u003cp\u003eNo. The X1-D fits the same four Fireluke tanks, but it is part of Freemax's X Mesh line rather than the 904L X line.\u003c\/p\u003e","brand":"FreeMax","offers":[{"title":"0.15 Ohm - X1","offer_id":32373983936547,"sku":"Freem-MAXLuke904LX-Coil-904LX1015","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - X3","offer_id":32373984002083,"sku":"Freem-MAXLuke904LX-Coil-904LX3015","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"0.5 Ohm - X2","offer_id":32373983969315,"sku":"Freem-MAXLuke904LX-Coil-904LX205","price":13.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/FreeMax-Maxluke-904L-X-Replacement-Coils.jpg?v=1724412181"},{"product_id":"freemax-904l-m-replacement-coils","title":"FreeMax 904L M Mesh Coils - Mesh Pro \u0026 M Pro 2","description":"\u003cp\u003eThe FreeMax 904L M Mesh Coils are replacement mesh coils with a power range from \u003cstrong\u003e40W to 110W\u003c\/strong\u003e. They are available in five options, four of them at \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e and the M2 at \u003cstrong\u003e0.2 Ohms\u003c\/strong\u003e, and are supplied in a \u003cstrong\u003epack of three\u003c\/strong\u003e. The M1, M2, M3 and M4 are built with SS904L stainless mesh and a tea fibre cotton wick for even heating and clear flavour.\u003c\/p\u003e\n\u003cp\u003eAll five are sub-ohm mesh coils for direct-to-lung (DTL) vaping, so the difference between them is the mesh build, the resistance and the power each is rated for. They are made for FreeMax's M Pro series tanks and the Maxus 200W kits built around them. These coils are ideal for use with high VG e-liquids at 70% VG or above.\u003c\/p\u003e\n\u003ch4\u003eMesh Pro and M Pro Coils\u003c\/h4\u003e\n\u003cp\u003eThese coils are sold as both Mesh Pro coils and M Pro coils. Both names describe the same series of FreeMax tanks.\u003c\/p\u003e\n\u003cp\u003eThe M1, M2, M3 and M4 are FreeMax's FM CoilTech 4.0 builds. The M1-D is the FM CoilTech 5.0 build, a Double-D parallel mesh.\u003c\/p\u003e\n\u003cp\u003ePlease note: FreeMax has built more than one coil for the M Pro series, and a coil sold as a Mesh Pro coil will not always be one of these five. FreeMax has also built KA1 HoneyComb mesh coils, the Mesh Pro or M Pro Mesh line, with a flax fibre cotton wick rather than tea fibre cotton. The quadruple mesh in that line is rated for 80-120W rather than the 70-110W of the 904L M4, and the line includes a quintuple mesh build.\u003c\/p\u003e\n\u003ch4\u003e40W to 110W\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePower Range\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eMesh Build\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e40-70W\u003c\/td\u003e\n\u003ctd\u003e904L M1\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003eSingle mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50-80W\u003c\/td\u003e\n\u003ctd\u003eM1-D\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003eDouble-D parallel mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60-90W\u003c\/td\u003e\n\u003ctd\u003e904L M2\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eDouble mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80-110W\u003c\/td\u003e\n\u003ctd\u003e904L M3\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003eTriple mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70-110W\u003c\/td\u003e\n\u003ctd\u003e904L M4\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003eQuadruple mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe M1 is at its best around 65W, the M1-D around 70W, the M2 around 80W, the M3 around 100W and the M4 around 95W.\u003c\/p\u003e\n\u003ch4\u003eMilitary-Grade SS904L Mesh\u003c\/h4\u003e\n\u003cp\u003eSS904L mesh makes for a more stable and durable coil. Stainless steel mesh is also compatible with temperature control when used with a mod that supports it.\u003c\/p\u003e\n\u003ch4\u003e95% Tea Fibre Cotton\u003c\/h4\u003e\n\u003cp\u003eThe wick on the M1, M2, M3 and M4 is a blend of 95% tea fibre cotton and 5% organic cotton, which promotes faster saturation. That helps prevent dry hits when you are vaping at higher wattages.\u003c\/p\u003e\n\u003ch4\u003eDouble-D Parallel Mesh\u003c\/h4\u003e\n\u003cp\u003eThe M1-D is a parallel mesh coil, made from two single meshes. It heats the e-liquid faster, for a quick ramp up.\u003c\/p\u003e\n\u003ch4\u003eThe M Platform\u003c\/h4\u003e\n\u003cp\u003eEach coil is a push-fit into the tank base. The 904L M coils are designed for use with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFreeMax M Pro Tank\u003c\/li\u003e\n\u003cli\u003eFreeMax M Pro 2 Tank\u003c\/li\u003e\n\u003cli\u003eFreeMax M Pro 3 Tank\u003c\/li\u003e\n\u003cli\u003eFreeMax Maxus 200W Kit\u003c\/li\u003e\n\u003cli\u003eFreeMax Maxus 2 200W Kit\u003c\/li\u003e\n\u003cli\u003eFreeMax Maxus 3 200W Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Maxus 200W Kit is supplied with the M Pro 2 Tank. The Maxus 2 and the Maxus 3 are both supplied with the M Pro 3 Tank, with an M1-D pre-installed and a 904L M2 in the box.\u003c\/p\u003e\n\u003cp\u003ePlease note: the Maxus Max and the Maxus Max Pro are built around the Maxus DTL Pod rather than an M Pro tank, and are not compatible. The Fireluke M, 2, 3 and 4 use FreeMax's \u003ca href=\"\/products\/freemax-maxluke-904l-x-replacement-coils\" title=\"904L X replacement coils\"\u003e904L X replacement coils\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eDoes vaping at a higher wattage shorten coil life?\u003c\/h4\u003e\n\u003cp\u003eYes. A coil vaped at the top of its power range will burn out faster than one vaped in the middle, and sweetened high VG e-liquid will shorten coil life too. When you notice a drop in flavour or a burnt taste, replace the coil. Priming a new coil helps as well: fill the tank, then allow the coil to fully saturate before your first puff.\u003c\/p\u003e\n\u003ch4\u003eWhich coil should I fit at 80W?\u003c\/h4\u003e\n\u003cp\u003eAt 80W we recommend the 0.2 Ohms M2, which is at its best around that figure. The M1-D is rated for 50-80W, with 80W the maximum for that coil. The M3 and the M4 are both rated for 80W as well, but they are suited to more power than that.\u003c\/p\u003e","brand":"FreeMax","offers":[{"title":"0.15 Ohm - M1 Double-D Mesh","offer_id":40577750761507,"sku":"Freemax-904L-Coils-0.15Ohm-M1-Double-D-Mesh","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - M1 Single Mesh","offer_id":40577750794275,"sku":"Freemax-904L-Coils-0.15Ohm-M1-Single-Mesh","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - M3 Triple Mesh","offer_id":40577750859811,"sku":"Freemax-904L-Coils-0.15Ohm-M3-Triple-Mesh","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - M4 Quadruple Mesh","offer_id":40577750892579,"sku":"Freemax-904L-Coils-0.15Ohm-M4-Quadruple-Mesh","price":9.99,"currency_code":"GBP","in_stock":false},{"title":"0.2 Ohm - M2 Double Mesh","offer_id":40577750827043,"sku":"Freemax-904L-Coils-0.2Ohm-M2-Double-Mesh","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/FreeMax-904L-M-Mesh-Coils-Mesh-Pro-_-M-Pro-2.jpg?v=1724411926"},{"product_id":"smok-tfv9-replacement-coils","title":"SMOK TFV9 Replacement Coils","description":"\u003cp\u003eThe SMOK TFV9 Replacement Coils are SMOK's \u003cstrong\u003eV9 Meshed\u003c\/strong\u003e coil, a \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e resistance for a wattage range of \u003cstrong\u003e40-90W\u003c\/strong\u003e, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. The mesh design heats your e-liquid across a larger surface area, for more flavour and vapour.\u003c\/p\u003e\n\u003cp\u003eThese coils are designed for sub-ohm, direct to lung (DTL) vaping. We advise using them with a high VG e-liquid (70% VG or higher).\u003c\/p\u003e\n\u003ch4\u003eTanks and Kits for the V9\u003c\/h4\u003e\n\u003cp\u003eThe V9 Meshed coil is compatible with the SMOK TFV9 and TFV9 Mini tanks. Four SMOK kits are fitted with one of those tanks:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRigel\u003c\/li\u003e\n\u003cli\u003eRigel Mini\u003c\/li\u003e\n\u003cli\u003eScar Mini\u003c\/li\u003e\n\u003cli\u003eScar 18\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Rigel and the Scar 18 power up to a maximum output of 230W. The Rigel Mini powers up to 80W. You can set the wattage anywhere between 40W and 90W.\u003c\/p\u003e\n\u003ch4\u003eInside the V9 Coil\u003c\/h4\u003e\n\u003cp\u003eEach V9 coil is a KA1 mesh in a stainless steel body, wicked with organic cotton. The steel construction and the cotton wick are designed for extended coil life and clean flavour.\u003c\/p\u003e\n\u003ch4\u003eLonger Life From Every Coil\u003c\/h4\u003e\n\u003cp\u003eWhen you fit a new coil, wait a few minutes before your first vape so the coil can fully saturate. That helps prevent dry hits. Keep your tank topped up as well, since vaping a mesh coil as the liquid runs low will cause it to burn out faster.\u003c\/p\u003e\n\u003ch4\u003eDo other SMOK coils fit the TFV9 or TFV9 Mini tank?\u003c\/h4\u003e\n\u003cp\u003eYes. SMOK's V8 Baby coils are cross-compatible with the TFV9 and TFV9 Mini tanks and with all four kits above. The \u003ca href=\"\/products\/smok-tfv8-baby-replacement-coils\" title=\"SMOK TFV8 Baby Replacement Coils\"\u003eSMOK TFV8 Baby Replacement Coils\u003c\/a\u003e include a 0.6 Ohms Q2 rated at 20-50W, which is a higher resistance and a lower wattage than this mesh coil is built for. For a TFV8 Baby, TFV8 Big Baby or TFV12 Baby Prince tank, the V8 Baby range is the one to choose.\u003c\/p\u003e\n","brand":"Smok","offers":[{"title":"Default Title","offer_id":32378683457571,"sku":"Smok-TFV9-Coil","price":12.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok_tfv9_replacement_coils_-_box_front.jpg?v=1662798277"},{"product_id":"smok-rpm-replacement-coils","title":"SMOK RPM Replacement Coils","description":"\u003cp\u003eSMOK RPM Replacement Coils include a \u003cstrong\u003e0.3 Ohms Mesh\u003c\/strong\u003e rated at \u003cstrong\u003e10-15W\u003c\/strong\u003e for mouth-to-lung (MTL) vaping. The range covers \u003cstrong\u003esix resistances\u003c\/strong\u003e in \u003cstrong\u003efive of SMOK's builds\u003c\/strong\u003e, from that mesh coil up to a \u003cstrong\u003e1.2 Ohms Quartz\u003c\/strong\u003e, and two of them, the 0.4 Ohms Mesh and the 0.6 Ohms Triple, are the \u003cstrong\u003e25W\u003c\/strong\u003e direct-to-lung (DTL) coils. There are five coils in each pack.\u003c\/p\u003e\n\u003cp\u003eThese coils are suited to a 50\/50 freebase or a nic salt e-liquid, so choosing between them is about the draw you want and the wattage you vape at rather than the e-liquid.\u003c\/p\u003e\n\u003ch4\u003eThe Range by Wattage\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003cth\u003eRecommended wattage\u003c\/th\u003e\n\u003cth\u003eDraw\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4 Ohms\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003ctd\u003e25W\u003c\/td\u003e\n\u003ctd\u003eDirect-to-lung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003eTriple coil\u003c\/td\u003e\n\u003ctd\u003e25W\u003c\/td\u003e\n\u003ctd\u003eDirect-to-lung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 Ohms\u003c\/td\u003e\n\u003ctd\u003eDual coil\u003c\/td\u003e\n\u003ctd\u003e16W\u003c\/td\u003e\n\u003ctd\u003eMouth-to-lung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3 Ohms\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003ctd\u003e10-15W\u003c\/td\u003e\n\u003ctd\u003eMouth-to-lung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.0 Ohms\u003c\/td\u003e\n\u003ctd\u003eSingle coil\u003c\/td\u003e\n\u003ctd\u003e14W\u003c\/td\u003e\n\u003ctd\u003eMouth-to-lung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eQuartz\u003c\/td\u003e\n\u003ctd\u003e12W\u003c\/td\u003e\n\u003ctd\u003eMouth-to-lung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eThe Two 25W Coils\u003c\/h4\u003e\n\u003cp\u003eThe 0.4 Ohms Mesh gives you crisp flavour, while the 0.6 Ohms Triple has a fast ramp up and more vapour.\u003c\/p\u003e\n\u003ch4\u003eThe Only Quartz Build\u003c\/h4\u003e\n\u003cp\u003eThe 1.2 Ohms is the only Quartz build in the range, at 12W for mouth-to-lung vaping.\u003c\/p\u003e\n\u003ch4\u003eCheck the Pod First\u003c\/h4\u003e\n\u003cp\u003eThese coils fit the RPM pod, and SMOK has fitted that pod to 22 of its kits.\u003c\/p\u003e\n\u003cp\u003eThe 22 kits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM - RPM40, RPM80, RPM80 Pro, RPM Lite, RPM 2, RPM 2S and RPM 4\u003c\/li\u003e\n\u003cli\u003eNord - Nord 2, Nord 4 and Nord X\u003c\/li\u003e\n\u003cli\u003eFetch - Fetch Mini and Fetch Pro\u003c\/li\u003e\n\u003cli\u003eSCAR - SCAR-P3 and SCAR-P5\u003c\/li\u003e\n\u003cli\u003eThallo - Thallo and Thallo S\u003c\/li\u003e\n\u003cli\u003eOther kits - Alike, IPX 80, MAG Pod, Stick R22, Morph Pod-40 and Pozz X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSeveral of those kits are supplied with a second pod on another range:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRPM80, RPM80 Pro and Fetch Pro - an RGC pod as well, for \u003ca href=\"\/products\/smok-rgc-replacement-coils\" title=\"SMOK\u0026amp;#x27;s RGC coils\"\u003eSMOK's RGC coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNord 4 and Nord X - an RPM 2 pod as well, for \u003ca href=\"\/products\/smok-rpm-2-replacement-coils\" title=\"SMOK\u0026amp;#x27;s RPM 2 coils\"\u003eSMOK's RPM 2 coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRPM40, Nord 2 and Fetch Mini - a Nord pod as well, for \u003ca href=\"\/products\/smok-nord-replacement-coils\" title=\"SMOK\u0026amp;#x27;s Nord coils\"\u003eSMOK's Nord coils\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe RPM C uses SMOK's RPM 2 coils instead. The RPM 5 uses SMOK's \u003ca href=\"\/products\/smok-rpm-3-replacement-coils\" title=\"RPM 3 coils\"\u003eRPM 3 coils\u003c\/a\u003e, and the Nord 5 and Nord GT are on that range as well.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between RPM, RPM 2 and RPM 3 coils?\u003c\/h4\u003e\n\u003cp\u003eThey are three separate coil ranges and none of them is interchangeable. An RPM coil fits an RPM pod and an RPM 2 coil fits an RPM 2 pod. An RPM 3 coil fits the pod in an RPM 5 or a Nord 5.\u003c\/p\u003e\n\u003ch4\u003eIs the 0.3 Ohms really a mouth-to-lung coil?\u003c\/h4\u003e\n\u003cp\u003eThe 0.3 Ohms is a sub-ohm resistance, but it is rated at 10-15W while the 0.4 and the 0.6 are rated at 25W, and the draw it gives is mouth-to-lung. So the 0.3 Ohms is the Mesh coil to fit for an MTL draw rather than clouds.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.3 Ohm - Mesh","offer_id":32382501748771,"sku":"Smok-RPM-Coil-0.3-Ohm-Mesh","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm - Mesh","offer_id":32382501814307,"sku":"Smok-RPM-Coil-0.4-Ohm-Mesh","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - Triple","offer_id":32382501847075,"sku":"Smok-RPM-Coil-0.6-Ohm-Tripl","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm - DC","offer_id":40575839600675,"sku":"Smok-RPM-Coil-0.8-Ohm-DC","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm - SC","offer_id":32382501879843,"sku":"Smok-RPM-Coil-1.0-Ohm","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm - Quartz","offer_id":32382501912611,"sku":"Smok-RPM-Coil-1.2-Ohm-Quart","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/RPM-Replacement-Coils-by-SMOK.jpg?v=1662803652"},{"product_id":"smok-nord-replacement-coils","title":"SMOK Nord Replacement Coils","description":"\u003cp\u003eEach SMOK Nord Replacement Coil is supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e, with six coils to choose from. Both the \u003cstrong\u003e0.6 and 0.8 Ohms\u003c\/strong\u003e are available in either a \u003cstrong\u003emesh\u003c\/strong\u003e or a \u003cstrong\u003edual coil\u003c\/strong\u003e, and the \u003cstrong\u003e1.4 Ohms\u003c\/strong\u003e in either a \u003cstrong\u003eregular\u003c\/strong\u003e or a \u003cstrong\u003eceramic\u003c\/strong\u003e coil.\u003c\/p\u003e\n\u003cp\u003eThe two 0.6 Ohm coils are for sub-ohm, direct-to-lung (DTL) vaping: the mesh at up to 25W, the regular dual coil at a recommended 20W. The 0.8 and 1.4 Ohm coils are for mouth-to-lung (MTL) vaping instead, at up to 16W and up to 12W.\u003c\/p\u003e\n\u003ch4\u003eMesh, Regular and Ceramic\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003cth\u003eWhy choose it\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohm Mesh\u003c\/td\u003e\n\u003ctd\u003eUp to 25W\u003c\/td\u003e\n\u003ctd\u003eMore vapour from a mesh coil with a larger surface area.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohm DC\u003c\/td\u003e\n\u003ctd\u003eAround 20W\u003c\/td\u003e\n\u003ctd\u003eA regular dual coil rather than a mesh, with a fast ramp up.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 Ohm Mesh\u003c\/td\u003e\n\u003ctd\u003eUp to 16W\u003c\/td\u003e\n\u003ctd\u003eThe mesh coil for mouth-to-lung vaping, with plenty of flavour.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 Ohm DC\u003c\/td\u003e\n\u003ctd\u003eUp to 16W\u003c\/td\u003e\n\u003ctd\u003eA dual coil, for discreet vapour production.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.4 Ohm Regular\u003c\/td\u003e\n\u003ctd\u003eUp to 12W\u003c\/td\u003e\n\u003ctd\u003eThe standard coil, for a throat hit similar to smoking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.4 Ohm Ceramic\u003c\/td\u003e\n\u003ctd\u003eUp to 12W\u003c\/td\u003e\n\u003ctd\u003eThe ceramic coil, for better flavour and longer coil life.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWe advise using the two 0.6 Ohm coils with high VG e-liquids, at 70VG\/30PG and higher. The 0.8 Ohm coils are best suited to a 50\/50 freebase, and the 1.4 Ohms to a 50\/50 freebase or a nic salt e-liquid.\u003c\/p\u003e\n\u003ch4\u003eKits Built for Nord Coils\u003c\/h4\u003e\n\u003cp\u003eThese coils are compatible with the Nord Pod Kit and any SMOK kit that uses a pod built for a Nord coil:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNord Pod Kit\u003c\/li\u003e\n\u003cli\u003eNord 2\u003c\/li\u003e\n\u003cli\u003eNord Pro\u003c\/li\u003e\n\u003cli\u003eNord 50W\u003c\/li\u003e\n\u003cli\u003eFetch Mini\u003c\/li\u003e\n\u003cli\u003eAlike\u003c\/li\u003e\n\u003cli\u003eRPM40\u003c\/li\u003e\n\u003cli\u003eTrinity Alpha\u003c\/li\u003e\n\u003cli\u003eVape Pen Nord 19 and Nord AIO 19\u003c\/li\u003e\n\u003cli\u003eVape Pen Nord 22 and Nord AIO 22\u003c\/li\u003e\n\u003cli\u003ePriv N19\u003c\/li\u003e\n\u003cli\u003eStick N18\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: the RPM40, Nord 2, Fetch Mini, Alike and Nord 50W are compatible with an RPM pod as well as a Nord pod, and an RPM pod uses \u003ca href=\"\/products\/smok-rpm-replacement-coils\" title=\"SMOK RPM coils\"\u003eSMOK RPM coils\u003c\/a\u003e instead. The Nord 50W is supplied with a Nord pod and an LP2 pod, and its LP2 pod uses SMOK's LP2 coils. Some Nord kits are built for other coil ranges: the Nord C, Nord X, Nord 4, Nord 5, Nord 6 and Nord GT are not compatible with these coils.\u003c\/p\u003e\n\u003ch4\u003eCan I use a Nord Pro coil in a Nord pod?\u003c\/h4\u003e\n\u003cp\u003eNo. Nord Pro coils are for Nord Pro pods only and are not compatible with a Nord pod. The Nord Pro pod is compatible with both Nord and Nord Pro coils, so these coils are suitable for a Nord Pro as well.\u003c\/p\u003e\n\u003ch4\u003eShould I choose the 1.4 Ohm Regular or the Ceramic?\u003c\/h4\u003e\n\u003cp\u003eBoth are 1.4 Ohms and both are rated at up to 12W for mouth-to-lung vaping with the same e-liquids. The ceramic coil is designed for continuous mouth-to-lung vaping and is built for better flavour and longer coil life. Choose the ceramic for all-day vaping, or the 1.4 Ohm Regular for a throat hit similar to smoking.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.6 Ohm - Mesh","offer_id":40575827869731,"sku":"Smok-Nord-Coils-0.6Ohm-Mesh","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - Regular DC","offer_id":32382531993635,"sku":"Smok-Nord-Coils-0.6Ohm-Reg","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm - DC","offer_id":40575828525091,"sku":"Smok-Nord-Coils-0.8Ohm-DC","price":9.99,"currency_code":"GBP","in_stock":false},{"title":"0.8 Ohm - Mesh","offer_id":40575828492323,"sku":"Smok-Nord-Coils-0.8Ohm-Mesh","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.4 Ohm - Ceramic","offer_id":40575828590627,"sku":"Smok-Nord-Coils-1.4Ohm-Cerm","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.4 Ohm - Regular","offer_id":40575828557859,"sku":"Smok-Nord-Coils-1.4Ohm-Reg","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"3 x Pod Empty","offer_id":40575828623395,"sku":"Smok-Nord-Pods-Empty-3Pack","price":8.5,"currency_code":"GBP","in_stock":true},{"title":"1 Pod with Coils","offer_id":40575828656163,"sku":"Smok-Nord-1Pod+Coil","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/Smok-Nord-Replacement-Coils.jpg?v=1724413257"},{"product_id":"smok-tfv8-baby-v2-replacement-coils","title":"Smok TFV8 V2 Replacement Coils","description":"\u003cp\u003eThe SMOK TFV8 Baby V2 Replacement Coils are designed for the TFV8 Baby V2 tank (also the TFV-Mini V2), and come in a \u003cstrong\u003epack of 3\u003c\/strong\u003e covering the A and K coils, five of SMOK's seven V2 codes, in resistances of \u003cstrong\u003e0.15, 0.17 and 0.2 Ohms\u003c\/strong\u003e, all sub-ohm and direct-to-lung (DTL).\u003c\/p\u003e\n\u003cp\u003eEach coil is fitted with a stainless steel body and antibacterial medical cotton, built for high VG e-liquid of 70% or above, delivering plenty of vapour.\u003c\/p\u003e\n\u003ch4\u003eMade for the Baby V2 Tank\u003c\/h4\u003e\n\u003cp\u003eThe coils are made for the TFV8 Baby V2 \/ TFV-Mini V2, a 2ml stainless steel sub-ohm tank with a rotary top-fill cap and adjustable airflow at the base. The R-Kiss, the R-Kiss 2 and the \u003ca href=\"\/products\/smok-species-230w-tfv8-baby-v2-starter-kit\" title=\"SMOK Species 230W\"\u003eSMOK Species 230W\u003c\/a\u003e kit are all built around that tank, and they are compatible with the full range.\u003c\/p\u003e\n\u003cp\u003eThe original TFV8 Baby, or Baby Beast, uses the V8 Baby coils instead, including the T8, T6, X4, Q2, M2 and Mesh. V2 coils do not fit it, and its own \u003ca href=\"\/products\/smok-tfv8-baby-replacement-coils\" title=\"TFV8 Baby coils\"\u003eTFV8 Baby coils\u003c\/a\u003e do not fit the V2 tank.\u003c\/p\u003e\n\u003ch4\u003eMesh A Coils\u003c\/h4\u003e\n\u003cp\u003eThe A1 is a single mesh with a larger heating area, the A2 a dual mesh with SMOK's cobra mesh for more airflow and vapour production, and the A3 a triple mesh. The A1 excels at higher wattages.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003cth\u003ePower range\u003c\/th\u003e\n\u003cth\u003eBest at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eV2 A1\u003c\/td\u003e\n\u003ctd\u003e0.17 Ohms\u003c\/td\u003e\n\u003ctd\u003eSingle mesh\u003c\/td\u003e\n\u003ctd\u003e90-140W\u003c\/td\u003e\n\u003ctd\u003e110-130W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV2 A2\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eDual mesh, cobra mesh\u003c\/td\u003e\n\u003ctd\u003e50-80W\u003c\/td\u003e\n\u003ctd\u003e65-75W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV2 A3\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003eTriple mesh\u003c\/td\u003e\n\u003ctd\u003e60-100W\u003c\/td\u003e\n\u003ctd\u003e80-90W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eQuad and Octo K Coils\u003c\/h4\u003e\n\u003cp\u003eThe K coils are SMOK's quad (4) and octo (8) builds, both giving dense clouds. The K1 is rated for the higher wattages of the two, and the K4 sits in the middle of the seven codes. Both K codes are available here.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003cth\u003ePower range\u003c\/th\u003e\n\u003cth\u003eBest at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eV2 K1\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eQuadruple\u003c\/td\u003e\n\u003ctd\u003e80-130W\u003c\/td\u003e\n\u003ctd\u003e90-120W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV2 K4\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003eOctuple\u003c\/td\u003e\n\u003ctd\u003e50-110W\u003c\/td\u003e\n\u003ctd\u003e60-80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eDo I need to prime a new Baby V2 coil?\u003c\/h4\u003e\n\u003cp\u003eYes, and more so here than on a low-power coil. Fill the tank and allow a few minutes so the coil can fully saturate before you vape it, which helps prevent dry hits and a burnt taste on thick high VG e-liquid. Set your wattage low for the first few draws, then work up towards the coil's best figure.\u003c\/p\u003e\n\u003ch4\u003eWhat about the S1 and S2 coils?\u003c\/h4\u003e\n\u003cp\u003eThe S1 and the S2 are the other two V2 codes. The S1 is a single mesh and the S2 a quadruple coil, both 0.15 Ohms, at 40-80W and 30-70W, so they are the low-power end of the range. The S coils are suited to lower powered kits, and both the Stick V9 and the Stick V9 Max have a max output of 60W. The K1 and the K4 are compatible with those two kits as well, and the K4, which works best around 60-80W, is the one in this pack for a 60W kit.\u003c\/p\u003e\n\u003ch4\u003eWhich coil do I need if mine says 0.15 Ohms?\u003c\/h4\u003e\n\u003cp\u003eFour of the seven codes are 0.15 Ohms, the A3, K4, S1 and S2, with power ranges anywhere between 30W and 110W. So match the code, not the number. Two of the four are in this pack, the A3 best at 80-90W and the K4 at 60-80W. If you are replacing like for like, check the code on your old coil or the last pack you bought.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.15 Ohm - A3","offer_id":32382534189091,"sku":"Smok-TFV8V2-Coil-A3015-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - K4","offer_id":32382534221859,"sku":"Smok-TFV8V2-Coil-K4015-Ohm","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"0.17 Ohm - A1","offer_id":32382534123555,"sku":"Smok-TFV8V2-Coil-A1017-Ohm","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - A2","offer_id":32382534156323,"sku":"Smok-TFV8V2-Coil-A202-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - K1","offer_id":32382534254627,"sku":"Smok-TFV8V2-Coil-K102-Ohm","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok-tfv8-v2-coils-2.jpg?v=1662809079"},{"product_id":"smok-tfv16-lite-replacement-coils","title":"SMOK TFV16 Lite Replacement Coils","description":"\u003cp\u003eThe SMOK TFV16 Lite Replacement Coils come in two mesh builds, and two is the whole range: a \u003cstrong\u003e0.15 Ohms Dual Mesh\u003c\/strong\u003e and a \u003cstrong\u003e0.2 Ohms Conical Mesh\u003c\/strong\u003e. They fit the SMOK TFV16 Lite tank only, and are supplied in a \u003cstrong\u003epack of 3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEach is a sub-ohm mesh coil built for direct-to-lung (DTL) vaping, recommended for use with a high VG e-liquid of 70% or above. Expect dense vapour and plenty of flavour.\u003c\/p\u003e\n\u003ch4\u003eBoth Start at 60W\u003c\/h4\u003e\n\u003cp\u003eThe 0.15 Ohms Dual Mesh is best vaped at wattages between 60 - 90W, and the 0.2 Ohms Conical Mesh between 60 - 85W. Either suits the same high VG e-liquid, so the difference between them is the resistance and 5W at the top of the range.\u003c\/p\u003e\n\u003ch4\u003eThe Lite Tank Only\u003c\/h4\u003e\n\u003cp\u003eThese coils are compatible with the Lite version of the TFV16 tank only. The \u003ca href=\"\/products\/smok-tfv16-replacement-coils\" title=\"standard TFV16 coils\"\u003estandard TFV16 coils\u003c\/a\u003e do not fit the Lite, and these do not fit the standard tank. SMOK made a 0.2 Ohms Conical Mesh for each of the two tanks, so the resistance on its own does not tell you which tank a coil is for.\u003c\/p\u003e\n\u003ch4\u003eWhy does a new coil taste burnt on the first fill?\u003c\/h4\u003e\n\u003cp\u003eThat is usually priming. Fill the tank and let it sit for 5 minutes before vaping a new coil, which gives the coil time to soak. Vaping it before it has soaked is what gives you the burnt taste, and a coil primed properly will last longer.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.15 Ohm - Dual Mesh","offer_id":32382538547235,"sku":"Smok-TFV16Lite-Coil-0.15-Ohm-Dual","price":13.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - Conical Mesh","offer_id":32382538580003,"sku":"Smok-TFV16Lite-Coil-0.2-Ohm-Conic","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/tfv16-lite-replacement-coils-by-smok.jpg?v=1662803580"},{"product_id":"smok-tfv12-prince-replacement-coils","title":"SMOK TFV12 Prince Replacement Coils","description":"\u003cp\u003eThe SMOK TFV12 Prince Replacement Coils are available in \u003cstrong\u003esix options\u003c\/strong\u003e, three of them at \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e. Each one has a different heating element. They are made for the \u003cstrong\u003eSMOK TFV12 Prince tank\u003c\/strong\u003e and supplied in a \u003cstrong\u003epack of 3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese are sub-ohm coils designed for direct-to-lung (DTL) vaping, with a power range from 30W to 120W. They work best with high VG e-liquid, and we advise using 70% VG or higher.\u003c\/p\u003e\n\u003ch4\u003eWattage for the Four Coil Options\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eHeating element\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eV12 Prince-M4\u003c\/td\u003e\n\u003ctd\u003e0.17 Ohms\u003c\/td\u003e\n\u003ctd\u003eQuadruple mesh\u003c\/td\u003e\n\u003ctd\u003e30-70W, best 40-60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV12 Prince-Q4\u003c\/td\u003e\n\u003ctd\u003e0.4 Ohms\u003c\/td\u003e\n\u003ctd\u003eQuadruple\u003c\/td\u003e\n\u003ctd\u003e40-100W, best 60-80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV12 Prince-X6\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003eSextuple\u003c\/td\u003e\n\u003ctd\u003e50-120W, best 80-100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV12 Prince-T10\u003c\/td\u003e\n\u003ctd\u003e0.12 Ohms\u003c\/td\u003e\n\u003ctd\u003eDecuple\u003c\/td\u003e\n\u003ctd\u003e60-120W, best 80-110W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eCheck the max output of your mod first, because the X6 and the T10 are both best at 80W and above.\u003c\/p\u003e\n\u003ch4\u003eThe Mesh and the Strip\u003c\/h4\u003e\n\u003cp\u003eThe Mesh and the Strip are the other two options at 0.15 Ohms. One uses a single mesh heating element, the other a strip. Both are for direct-to-lung vaping on high VG e-liquid, the same as the M4, Q4, X6 and T10.\u003c\/p\u003e\n\u003ch4\u003eWhich Prince Tank You Have\u003c\/h4\u003e\n\u003cp\u003eSMOK's name for the TFV12 Prince tank is now the P-Tank. On the SMOK Stick P25 kit, the 0.17 Ohms M4 is the coil best suited to it. Please note: SMOK's Dual Mesh coil for this tank needs bulb glass #2. The TFV12 Baby Prince is a different tank, and it uses SMOK's \u003ca href=\"\/products\/smok-tfv8-baby-replacement-coils\" title=\"TFV8 Baby coils\"\u003eTFV8 Baby coils\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eHow long does a TFV12 Prince coil last?\u003c\/h4\u003e\n\u003cp\u003eThe six are not all the same on this. An M4 set at 40-60W is doing far less work than a T10 at 80-110W, so it will keep going for longer. A 70% VG e-liquid is thick as well, so give any new coil a few minutes in a filled tank before the first vape, which helps prevent dry hits.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.12 Ohm-T10","offer_id":32382542577699,"sku":"Smok-TFV12-Princ-Coil-0.12-Ohm-T10","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - Mesh","offer_id":32382542610467,"sku":"Smok-TFV12-Princ-Coil-0.15-Ohm-Mesh","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - Strip","offer_id":32382542643235,"sku":"Smok-TFV12-Princ-Coil-0.15-Ohm-Strip","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm-X6","offer_id":32382542676003,"sku":"Smok-TFV12-Princ-Coil-0.15-Ohm-X6","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.17 Ohm-M4","offer_id":32382542708771,"sku":"Smok-TFV12-Princ-Coil-0.17-Ohm-M4","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm-Q4","offer_id":32382542741539,"sku":"Smok-TFV12-Princ-Coil-0.4-Ohm-Q4","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok-tfv12-prince-q4-coils.jpg?v=1662806889"},{"product_id":"smok-tfv8-x-baby-replacement-coils","title":"Smok TFV8 X-Baby Prince Tank Replacement Coils","description":"\u003cp\u003eSMOK TFV8 X-Baby Replacement Coils are available in resistances ranging from \u003cstrong\u003e0.2 Ohms\u003c\/strong\u003e to \u003cstrong\u003e0.4 Ohms\u003c\/strong\u003e, in a choice of the T6, Q2 and M2. They are supplied in a \u003cstrong\u003epack of 3\u003c\/strong\u003e for the SMOK TFV8 X-Baby tank.\u003c\/p\u003e\n\u003cp\u003eBuilt for direct-to-lung (DTL) vaping, each coil is sub-ohm. Ideal for use with high VG e-liquid of 60% or above. Expect plenty of vapour.\u003c\/p\u003e\n\u003ch4\u003ePick by Power\u003c\/h4\u003e\n\u003cp\u003eThe M2 suits a mod with a fixed power output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eV8 X-Baby M2, 0.25 Ohms, Dual Coil - rated at an optimum 3.7V\u003c\/li\u003e\n\u003cli\u003eV8 X-Baby Q2, 0.4 Ohms, Dual Coil - 40 to 70W, best at 50 to 60W\u003c\/li\u003e\n\u003cli\u003eV8 X-Baby T6, 0.2 Ohms, Sextuple Coil - 40 to 110W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAllow a few minutes for the coil to soak before your first draw, which helps prevent a dry hit.\u003c\/p\u003e\n\u003ch4\u003eReading the Coil Labels\u003c\/h4\u003e\n\u003cp\u003eSMOK's V8 Baby range is labelled T6, Q2 and M2 as well, so the name on its own does not tell you whether a coil is an X-Baby or a V8 Baby. In the V8 Baby range there is a 0.2 Ohm T6, a 0.4 Ohm Q2 and a 0.25 Ohm M2. Check the coil is labelled V8 X-Baby when you buy a replacement.\u003c\/p\u003e\n\u003ch4\u003eWhich Tank These Fit\u003c\/h4\u003e\n\u003cp\u003eThese coils are only compatible with the SMOK TFV8 X-Baby tank, and they are not compatible with any other TFV8 tank. V8 Baby coils do not fit the X-Baby either.\u003c\/p\u003e\n\u003ch4\u003eDo X-Baby coils come in a pack of 3 or a pack of 5?\u003c\/h4\u003e\n\u003cp\u003eA pack of 3. SMOK's V8 Baby coils come in a pack of 5, so what is in the box will tell you whether you have X-Baby or V8 Baby coils.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.2 Ohm - M2","offer_id":32382548312099,"sku":"Smok-TFV8X-Baby-Prin-Coil-0.2-Ohm-M2","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - Q2","offer_id":32382548344867,"sku":"Smok-TFV8X-Baby-Prin-Coil-0.2-Ohm-Q2","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - T6","offer_id":32382548279331,"sku":"Smok-TFV8X-Baby-Prin-Coil-0.2-Ohm-T6","price":9.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok_v_x-baby_t6-_vape_superstore_600x600_7fa76146-e672-460c-b888-c69345b989f5.jpg?v=1662803810"},{"product_id":"smok-tfv8-baby-replacement-coils","title":"SMOK TFV8 Baby Replacement Coils","description":"\u003cp\u003eThe SMOK TFV8 Baby Replacement Coils are named for the build inside each head: the \u003cstrong\u003eQ2\u003c\/strong\u003e and \u003cstrong\u003eM2\u003c\/strong\u003e are dual coils, the \u003cstrong\u003eX4\u003c\/strong\u003e is a quad coil, and the \u003cstrong\u003eT6\u003c\/strong\u003e, \u003cstrong\u003eT8\u003c\/strong\u003e and \u003cstrong\u003eT12\u003c\/strong\u003e carry six, eight and twelve coils. The \u003cstrong\u003eMesh\u003c\/strong\u003e and the \u003cstrong\u003eStrip\u003c\/strong\u003e use a single element instead. There are \u003cstrong\u003eten\u003c\/strong\u003e to choose from, and each \u003cstrong\u003epack of 5\u003c\/strong\u003e is five of the same coil.\u003c\/p\u003e\n\u003cp\u003eEvery one is sub-ohm, from 0.15 Ohms up to 0.6 Ohms. Most are for direct to lung (DTL) vaping, with the 0.25 Ohms M2 and the 0.6 Ohms Q2 for a restricted direct lung (RDL) draw. Each is fitted with an organic cotton wick, and high VG e-liquid suits the range.\u003c\/p\u003e\n\u003ch4\u003eThe V8 Baby Range\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eDraw\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-Q2\u003c\/td\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003e2 coils\u003c\/td\u003e\n\u003ctd\u003e20-50W, best 30-40W\u003c\/td\u003e\n\u003ctd\u003eRDL or DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-M2\u003c\/td\u003e\n\u003ctd\u003e0.25 Ohms\u003c\/td\u003e\n\u003ctd\u003e2 coils\u003c\/td\u003e\n\u003ctd\u003e25-45W\u003c\/td\u003e\n\u003ctd\u003eRDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-M2\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e2 coils\u003c\/td\u003e\n\u003ctd\u003e25-45W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-Q2\u003c\/td\u003e\n\u003ctd\u003e0.4 Ohms\u003c\/td\u003e\n\u003ctd\u003e2 coils\u003c\/td\u003e\n\u003ctd\u003e40-80W, best 55-65W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-X4\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e4 coils\u003c\/td\u003e\n\u003ctd\u003e30-70W, best 45-60W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-T6\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e6 coils\u003c\/td\u003e\n\u003ctd\u003e40-130W, best 70-90W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-T8\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e8 coils\u003c\/td\u003e\n\u003ctd\u003e50-110W, best 60-80W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby-T12\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e12 coils\u003c\/td\u003e\n\u003ctd\u003e50-90W, best 60-80W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby Mesh\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003esingle mesh\u003c\/td\u003e\n\u003ctd\u003e40-80W, best 60-70W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV8 Baby Strip\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003estrip\u003c\/td\u003e\n\u003ctd\u003e40-100W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSix of the ten are 0.15 Ohms, so check the name on the box rather than the resistance.\u003c\/p\u003e\n\u003ch4\u003eBaby, Big Baby and Baby Prince\u003c\/h4\u003e\n\u003cp\u003eThese are designed for use with three tanks in SMOK's Baby line: the TFV8 Baby (the Baby Beast), the TFV8 Big Baby and the TFV12 Baby Prince. The TFV12 Baby Prince uses these coils despite the Prince in its name. If you own more than one of the three, the same coil fits all of them. SMOK's TFV9 and TFV9 Mini tanks are also compatible with these coils.\u003c\/p\u003e\n\u003cp\u003eThe TFV8 X-Baby is a separate tank with its own \u003ca href=\"\/products\/smok-tfv8-x-baby-prince-tank-replacement-coils-3-pack\" title=\"TFV8 X-Baby coils\"\u003eTFV8 X-Baby coils\u003c\/a\u003e. The TFV8 Baby V2 and the TFV-Mini V2 are made for the \u003ca href=\"\/products\/smok-tfv8-v2-replacement-coils-3-pack\" title=\"TFV8 V2 coils\"\u003eTFV8 V2 coils\u003c\/a\u003e. And the TFV12 Prince, the one without Baby in its name, uses the \u003ca href=\"\/products\/smok-tfv12-prince-replacement-coils\" title=\"TFV12 Prince coils\"\u003eTFV12 Prince coils\u003c\/a\u003e. These coils are also not compatible with the TFV8 Cloud Beast, which uses the V8-T8, V8-T6, V8-Q4 and V8-X4 instead.\u003c\/p\u003e\n\u003ch4\u003eDoes the Mesh coil last longer than the T8 or the T12?\u003c\/h4\u003e\n\u003cp\u003eNot because it is a mesh build. The Mesh covers 40-80W, while the T8 reaches 110W and the T12 90W, so the Mesh is set lower than both of them, and wattage is the part you control. Fit whichever suits the power you vape at, and keep it inside the range for that build.\u003c\/p\u003e\n\u003ch4\u003eWill these fit my TFV8 X-Baby?\u003c\/h4\u003e\n\u003cp\u003eNo. These are not compatible with the TFV8 X-Baby, and an X-Baby coil is not compatible with a TFV8 Baby tank either. The X-Baby's own coils are also a T6, Q2, M2 and X4, so check the tank in your hand as well as the coil.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.15 Ohm - M2","offer_id":32382604476451,"sku":"Smok-TFV8-Baby-Coil-0.15-Ohm-M2","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - Mesh","offer_id":32382604509219,"sku":"Smok-TFV8-Baby-Coil-0.15-Ohm-Mesh","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - Strip","offer_id":57398312075637,"sku":"Smok-TFV8-Baby-Coil-0.15-Ohm-Strip","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"0.15 Ohm - T12","offer_id":39635692683299,"sku":"Smok-TFV8-Baby-Coil-0.15-Ohm-T12","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - T8","offer_id":32382604541987,"sku":"Smok-TFV8-Baby-Coil-0.15-Ohm-T8","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - X4","offer_id":32382604574755,"sku":"Smok-TFV8-Baby-Coil-0.15-Ohm-X4","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - T6","offer_id":32382604607523,"sku":"Smok-TFV8-Baby-Coil-0.2-Ohm-T6","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.25 Ohm - M2","offer_id":32382604640291,"sku":"Smok-TFV8-Baby-Coil-0.25-Ohm-M2","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm - Q2","offer_id":32382604673059,"sku":"Smok-TFV8-Baby-Coil-0.4-Ohm-Q2","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - Q2","offer_id":32382604705827,"sku":"Smok-TFV8-Baby-Coil-0.6-Ohm-Q2","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok_tfv8_baby_m2_replacement_coils_-_accessories_-_coils_-_tanks.jpg?v=1662809266"},{"product_id":"smok-vape-pen-22-replacement-coils","title":"SMOK Vape Pen 22 Replacement Coils","description":"\u003cp\u003eSMOK Vape Pen 22 Replacement Coils are for use in the Vape Pen 22 and the Vape Pen V2 only, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. They come in a choice of two resistances: the Vape Pen Meshed at \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e and the \u003cstrong\u003e0.3 Ohms\u003c\/strong\u003e Dual Core. Both are sub-ohm and designed for direct-to-lung (DTL) vaping.\u003c\/p\u003e\n\u003cp\u003eThe Vape Pen 22 is supplied with a 0.3 Ohms Dual Core fitted, and there is also a spare in the box. The Vape Pen V2 comes with two 0.15 Ohms Meshed coils. Both are compatible with either pen, so you can change resistance to suit how you vape.\u003c\/p\u003e\n\u003ch4\u003eEven Heating Meshed Coil\u003c\/h4\u003e\n\u003cp\u003eThe 0.15 Ohms is a Vape Pen Meshed coil, built to provide even heating and plenty of vapour. SMOK rates it at 30-50W.\u003c\/p\u003e\n\u003ch4\u003eNot the Nord Pens\u003c\/h4\u003e\n\u003cp\u003eSMOK's Nord coils are made for the Vape Pen Nord 19 and Vape Pen Nord 22, and these Vape Pen coils are not compatible with them. If you own one of those, you need \u003ca href=\"\/products\/smok-nord-replacement-coils\" title=\"SMOK Nord coils\"\u003eSMOK Nord coils\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003e70% VG or Higher\u003c\/h4\u003e\n\u003cp\u003eBoth resistances are best used with a high VG e-liquid, and SMOK's suggested ratio is 30% PG \/ 70% VG. With a fresh coil in the tank, fill it, put the top cap back on and leave it to stand for a few minutes so the coil can fully saturate and you get the best flavour from it.\u003c\/p\u003e\n\u003ch4\u003eShould I get the 0.15 Ohms or the 0.3 Ohms?\u003c\/h4\u003e\n\u003cp\u003eOpt for the 0.15 Ohms Meshed if you want more vapour, or the 0.3 Ohms Dual Core if you prefer more flavour.\u003c\/p\u003e\n\u003ch4\u003eDo I need to set a wattage on the Vape Pen 22?\u003c\/h4\u003e\n\u003cp\u003eNo. There is no wattage setting on either pen: you press the button to begin vaping, and the LED shows your battery level. SMOK's 30-50W is the Meshed coil's rating rather than a setting on the pen. The Vape Pen V2 is fitted with an adjustable airflow ring, which lets you tighten or open the draw.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.15 Ohm","offer_id":40577716191267,"sku":"Smok-VapePen22-Coil-0.15Ohm","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohm","offer_id":40577716224035,"sku":"Smok-VapePen22-Coil-0.3Ohm","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok-vape-pen-22-replacement-coils_600x600_278f449d-e5c3-4af1-9cce-8ac44c8c45b6.jpg?v=1668962506"},{"product_id":"smok-rgc-replacement-coils","title":"SMOK RGC Replacement Coils","description":"\u003cp\u003eSMOK RGC Replacement Coils are designed for the RGC pod, and your kit is supplied with an RPM pod as well. Only the RGC pod is compatible with these coils. They come in a \u003cstrong\u003epack of 5\u003c\/strong\u003e, available in either a \u003cstrong\u003e0.17 Ohms\u003c\/strong\u003e Conical Mesh for direct-to-lung (DTL) vaping or a \u003cstrong\u003e0.6 Ohms\u003c\/strong\u003e dual coil for mouth-to-lung (MTL).\u003c\/p\u003e\n\u003cp\u003eThe 0.17 Ohms comes pre-installed in the RGC pod. The 0.6 Ohms is for anyone who wants that pod to give a mouth-to-lung vape instead.\u003c\/p\u003e\n\u003ch4\u003eWarm, Dense nexMesh\u003c\/h4\u003e\n\u003cp\u003eThe 0.17 Ohms Conical Mesh is a KA1 coil with SMOK's nexMesh heating element, best vaped at wattages between 40 and 80W. The Conical Mesh build is designed to deliver richer flavour. Expect plenty of vapour, and a warmer vape than the 0.6 Ohms. Pair it with a high VG e-liquid.\u003c\/p\u003e\n\u003ch4\u003eMouth-to-Lung Dual Coil\u003c\/h4\u003e\n\u003cp\u003eThe 0.6 Ohms is fitted with a dual coil and a 2mm wicking hole, best vaped at 8-16W. It suits thinner e-liquids: a 50\/50 freebase or a nic salt.\u003c\/p\u003e\n\u003ch4\u003eYour Kit's Two Pods\u003c\/h4\u003e\n\u003cp\u003eThe RPM80, RPM80 Pro and Fetch Pro are supplied with two pods, an RPM pod and an RGC pod, each with its own coil pre-installed. The 0.17 and the 0.6 Ohms both fit the RGC pod, and for the RPM pod you will need SMOK's \u003ca href=\"\/products\/smok-rpm-replacement-coils\" title=\"RPM replacement coils\"\u003eRPM replacement coils\u003c\/a\u003e. The RGC pod has adjustable airflow as well, so you can tailor the draw to your liking.\u003c\/p\u003e\n\u003ch4\u003eDo these fit the SMOK Fetch Mini?\u003c\/h4\u003e\n\u003cp\u003eThe Fetch Mini is compatible with SMOK's Nord coils and RPM coils. It is the Fetch Pro that uses an RGC coil.\u003c\/p\u003e\n\u003ch4\u003eHow long should an RGC coil last?\u003c\/h4\u003e\n\u003cp\u003eWith the 0.17 Ohms that will depend on the wattage, and it will last longer at 40W than at 80W. Sweeter e-liquids shorten coil life. Allow a few minutes for a new coil to saturate after filling, which helps prevent dry hits.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.17 Ohm - Mesh","offer_id":40577684504611,"sku":"Smok-RGC-Coil-0.17Ohm-Mesh","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - DC MTL","offer_id":40577684537379,"sku":"Smok-RGC-Coil-0.6Ohm-DC-MTL","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok-rpm80-rgc-replacement-coils.jpg?v=1668963018"},{"product_id":"smok-rpm-2-replacement-coils","title":"SMOK RPM 2 Replacement Coils","description":"\u003cp\u003eThe SMOK RPM 2 Replacement Coils come as meshed and dual coil options \u003cstrong\u003efrom 0.16 up to 0.6 Ohms\u003c\/strong\u003e, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. Each one has a simple push-fit installation into the RPM 2 pod in your kit.\u003c\/p\u003e\n\u003cp\u003eThe 0.16 and 0.3 Ohms are meshed coils for direct-to-lung (DTL) vaping, the 0.25 Ohms is a dual coil for DTL, and the 0.6 Ohms is for a tighter mouth-to-lung (MTL) draw.\u003c\/p\u003e\n\u003ch4\u003eFast Ramp-Up Mesh\u003c\/h4\u003e\n\u003cp\u003eThe meshed coils have a larger heating area for more vapour.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.16 Ohms - 25-50W, best around 40W, for DTL vaping\u003c\/li\u003e\n\u003cli\u003e0.3 Ohms - 25-35W, best around 30W, for DTL vaping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhichever you pick, pair it with high VG e-liquid (70% VG+).\u003c\/p\u003e\n\u003ch4\u003eDual Coil Options\u003c\/h4\u003e\n\u003cp\u003eThe 0.25 and 0.6 Ohms are dual coil builds, made with KA1 wire.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.25 Ohms - 30-50W for DTL vaping\u003c\/li\u003e\n\u003cli\u003e0.6 Ohms - 12-25W for a smooth flavour and a tighter draw, ideal for MTL or restricted direct-to-lung (RDL) vaping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 0.25 Ohms reaches 50W, the same as the meshed 0.16 Ohms, so it is the dual coil for higher power, and the 0.6 Ohms is the one to choose for lower wattages. Pair the 0.25 Ohms with high VG e-liquid, and the 0.6 Ohms with 50\/50 or nic salts.\u003c\/p\u003e\n\u003ch4\u003eMake Each Coil Last\u003c\/h4\u003e\n\u003cp\u003ePriming comes first. Fill the pod and wait a few minutes so the coil can saturate before vaping, which helps prevent dry hits. Sweeter flavours clog up the coil and shorten coil life, so a menthol or a tobacco gives you more from each coil than a dessert. We recommend vaping the 0.16 Ohms around 40W and the 0.3 Ohms around 30W rather than at full power, and replacing the coil when the flavour starts to fade or a burnt taste comes through.\u003c\/p\u003e\n\u003ch4\u003eFits These SMOK Kits\u003c\/h4\u003e\n\u003cp\u003eThese coils are designed for use with the SMOK kits fitted with a pod made for an RPM 2 coil. That is fourteen kits in total:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSMOK RPM 2\u003c\/li\u003e\n\u003cli\u003eSMOK RPM 2S\u003c\/li\u003e\n\u003cli\u003eSMOK RPM C\u003c\/li\u003e\n\u003cli\u003eSMOK RPM 85\u003c\/li\u003e\n\u003cli\u003eSMOK RPM 100\u003c\/li\u003e\n\u003cli\u003eSMOK Nord 4\u003c\/li\u003e\n\u003cli\u003eSMOK Nord X\u003c\/li\u003e\n\u003cli\u003eSMOK Thallo\u003c\/li\u003e\n\u003cli\u003eSMOK Thallo S\u003c\/li\u003e\n\u003cli\u003eSMOK IPX 80\u003c\/li\u003e\n\u003cli\u003eSMOK SCAR-P3\u003c\/li\u003e\n\u003cli\u003eSMOK SCAR-P5\u003c\/li\u003e\n\u003cli\u003eSMOK G-Priv Pod Kit\u003c\/li\u003e\n\u003cli\u003eSMOK G-Priv Pro Pod Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: several of these kits are also supplied with an RPM pod, the Nord 4 among them, and the RPM pod is only compatible with SMOK's RPM coils. The two G-Priv pod kits are fitted with an LP2 pod, so the RPM 2 version of the G-Priv pod is required for use with these coils.\u003c\/p\u003e\n\u003cp\u003eRPM 2 coils do not fit RPM pods, and RPM coils do not fit RPM 2 pods. Kits fitted with an RPM pod use our \u003ca href=\"\/products\/smok-rpm-replacement-coils\" title=\"SMOK RPM coils\"\u003eSMOK RPM coils\u003c\/a\u003e.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.16 Ohm","offer_id":40575840649251,"sku":"Smok-RPM2-Coil-0.16Ohm","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.23 Ohm","offer_id":40575840682019,"sku":"Smok-RPM2-Coil-0.23Ohm","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.25 Ohm - DC","offer_id":39653975293987,"sku":"Smok-RPM2-Coil-0.25Ohm-DC","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohm","offer_id":40575840616483,"sku":"Smok-RPM2-Coil-0.3Ohm","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.6 Ohm - DC","offer_id":39653975261219,"sku":"Smok-RPM2-Coil-0.6Ohm-DC","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/Smok-RPM-2-Replacement-Coils-Mesh-0.16Ohm.jpg?v=1725998845"},{"product_id":"voopoo-pnp-replacement-coils","title":"VooPoo PnP \u0026 TW Replacement Coils","description":"\u003cp\u003eThe VooPoo PnP \u0026amp; TW Replacement Coils are made for the Vinci, Drag and Argus kits. The VM coils are suited to high VG e-liquids, and the PnP-TW coils to direct-to-lung vaping. Both series feature a push-fit installation, and each pack contains five coils.\u003c\/p\u003e\n\u003cp\u003eAlongside the two series are the R, C, M and DW coils. Together they are available in resistances of 0.15 Ohms to 1.2 Ohms at wattages between 10W and 80W, covering mouth-to-lung (MTL), restricted direct-to-lung (RDTL) and direct-to-lung (DTL) vaping.\u003c\/p\u003e\n\u003ch4\u003eKits That Use PnP Coils\u003c\/h4\u003e\n\u003cp\u003eThese coils are compatible with a wide range of VooPoo kits. The PnP-TW coils are designed for the Drag 4, Drag E60, Drag H80S, Drag S, Drag X and Argus Pro, and the TW20 and the DW60 are also compatible with the Vinci 3. The VM4 is compatible with the Drag H40. Please note: the PnP-TW15 is not suitable for the Drag H40.\u003c\/p\u003e\n\u003cp\u003eThe VM coils are designed for use with the Vinci, Vinci R, Vinci X, Vinci Air and Vinci S, the Drag S, Drag X, Drag Max, Drag Mini Refresh and Drag 2 Refresh, the Argus GT and Argus Air, the Navi, Musket and Seal, the UFORCE-L tank, and the PnP 20 and PnP 22 pods. The older Drag Baby and Find Trio use the R coils, the M2 and the C1, and the Caliber P22 AIO uses the M1.\u003c\/p\u003e\n\u003cp\u003eThe Drag X2 and S2, the Drag 5, the Argus Pro 2 and the Vinci E120 are not compatible with these coils, as those kits use the PnP X coil platform, so check your device before selecting a coil. The \u003ca href=\"\/products\/voopoo-pnp-x-replacement-coils\" title=\"VooPoo PnP X Replacement Coils\"\u003eVooPoo PnP X Replacement Coils\u003c\/a\u003e are designed for use with those kits. The PnP-X pod tank, which is a pod rather than the PnP X coil platform, is compatible with the VM and TW coils as well.\u003c\/p\u003e\n\u003ch4\u003eMulti-Layer Compound Cotton\u003c\/h4\u003e\n\u003cp\u003eThese coils are built with alloying technology, inlaid with multi-layer compound cotton. The singular coil builds and multi-mesh structured technology are designed for stable, powerful output, fresh flavour and a longer lifespan.\u003c\/p\u003e\n\u003ch4\u003eThe PnP-TW Metal Sheath\u003c\/h4\u003e\n\u003cp\u003eThe TW15 and TW20 are mesh coils like the VM range, built with a metal sheath and a smaller wicking hole. Both are suited to direct-to-lung vaping, at 55-70W for the TW15 and 40-55W for the TW20. Please note: they are not designed for high VG e-liquid.\u003c\/p\u003e\n\u003ch4\u003eThe PnP Range by Resistance\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eDraw\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-VM6\u003c\/td\u003e\n\u003ctd\u003e60-80W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-TW15\u003c\/td\u003e\n\u003ctd\u003e55-70W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-VM5\u003c\/td\u003e\n\u003ctd\u003e40-60W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-TW20\u003c\/td\u003e\n\u003ctd\u003e40-55W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-VM1\u003c\/td\u003e\n\u003ctd\u003e32-40W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.45 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-VM3\u003c\/td\u003e\n\u003ctd\u003e25-35W\u003c\/td\u003e\n\u003ctd\u003eRDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.45 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-M1\u003c\/td\u003e\n\u003ctd\u003e28-35W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-VM4\u003c\/td\u003e\n\u003ctd\u003e20-28W\u003c\/td\u003e\n\u003ctd\u003eRDTL to MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-M2\u003c\/td\u003e\n\u003ctd\u003e20-28W\u003c\/td\u003e\n\u003ctd\u003eRDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-DW60\u003c\/td\u003e\n\u003ctd\u003e18-23W\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-R1\u003c\/td\u003e\n\u003ctd\u003e12-18W\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.0 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-R2\u003c\/td\u003e\n\u003ctd\u003e10-15W\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003ePnP-C1\u003c\/td\u003e\n\u003ctd\u003e10-15W\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eCoil Life and Priming\u003c\/h4\u003e\n\u003cp\u003eWe recommend matching the e-liquid to the series, as a high VG e-liquid in a TW coil can affect wicking and shorten coil life. Once the flavour drops or you taste burning, replace the coil.\u003c\/p\u003e\n\u003cp\u003eWhen changing the coil, fill the pod and allow it to sit for 5 minutes so the coil can fully saturate. That helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eDoes the number on a PnP coil give you the resistance?\u003c\/h4\u003e\n\u003cp\u003eIn the TW and DW coils, yes. The TW15 is 0.15 Ohms, the TW20 is 0.2 Ohms and the DW60 is 0.6 Ohms. In the VM, M, R and C coils it does not, so the VM6 is 0.15 Ohms while the VM1 is 0.3 Ohms.\u003c\/p\u003e\n\u003cp\u003eThe name gives you the build and the draw style instead. The VM coils are mesh coils for sub-ohm vaping on high VG e-liquid, and the TW coils are mesh coils for direct-to-lung vaping. The M and DW coils are mesh as well, the C1 is a ceramic coil, and the R coils are for mouth-to-lung vaping on 50\/50 or nic salts. Match the name as well as the number and you have the right coil.\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"0.15 Ohm - TW15","offer_id":40114952798243,"sku":"Voopo-PNP-Coil-TW15-0.15Ohm","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - VM6","offer_id":32865344487459,"sku":"Voopo-PNP-Coil-VM6-0.15Ohm","price":10.45,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - TW20","offer_id":40114952831011,"sku":"Voopo-PNP-Coil-TW20-0.2Ohm","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - VM5","offer_id":32865344454691,"sku":"Voopo-PNP-Coil-VM5-0.2Ohm","price":10.45,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohm - VM1","offer_id":32865344323619,"sku":"Voopo-PNP-Coil-VM1-0.3Ohm","price":10.45,"currency_code":"GBP","in_stock":true},{"title":"0.45 Ohm - M1","offer_id":32865344520227,"sku":"Voopo-PNP-Coil-M1-0.45Ohm","price":10.45,"currency_code":"GBP","in_stock":false},{"title":"0.45 Ohm - VM3","offer_id":32865344356387,"sku":"Voopo-PNP-Coil-VM3-0.45Ohm","price":10.45,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - DW60","offer_id":40114952765475,"sku":"Voopo-PNP-Coil-DW60-0.6Ohm","price":12.99,"currency_code":"GBP","in_stock":false},{"title":"0.6 Ohm - M2","offer_id":32865344258083,"sku":"Voopo-PNP-Coil-M2-0.6Ohm","price":10.45,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - VM4","offer_id":32865344389155,"sku":"Voopo-PNP-Coil-VM4-0.6Ohm","price":10.45,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm - R1","offer_id":32865344290851,"sku":"Voopo-PNP-Coil-R1-0.8Ohm","price":10.45,"currency_code":"GBP","in_stock":false},{"title":"1.0 Ohm - R2","offer_id":32865344421923,"sku":"Voopo-PNP-Coil-R2-1.0Ohm","price":10.45,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm - C1","offer_id":32865344225315,"sku":"Voopo-PNP-Coil-C1-1.2Ohm","price":10.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/PnP-Replacement-Coils-By-Voopoo-C1.jpg?v=1668959538"},{"product_id":"geekvape-z-series-replacement-coils","title":"Geekvape Z Series Replacement Coils","description":"\u003cp\u003eThe Geekvape Z Series Replacement Coils are available in four sub-ohm resistances for \u003cstrong\u003edirect-to-lung (DTL)\u003c\/strong\u003e vaping: the current \u003cstrong\u003eXM Boost\u003c\/strong\u003e builds at \u003cstrong\u003e0.15 Ohms, 0.2 Ohms and 0.4 Ohms\u003c\/strong\u003e, and a \u003cstrong\u003e0.25 Ohms\u003c\/strong\u003e dual mesh coil. All four use a \u003cstrong\u003eKA1 mesh\u003c\/strong\u003e build, come in a \u003cstrong\u003epack of 5\u003c\/strong\u003e and fit Geekvape's Zeus and Z tanks. Expect dense vapour, a fast ramp-up and rich flavour at higher wattages.\u003c\/p\u003e\n\u003cp\u003eThe XM Boost coils replace the earlier Z coils, and because the push-fit design is the same, either generation fits any tank in the range. The choice is yours. All of them are DTL coils, and Geekvape recommend high-VG freebase e-liquid at a low nicotine strength of 3mg or below.\u003c\/p\u003e\n\u003ch4\u003eThe Current Z Coils\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eBest for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.15 Ohms XM\u003c\/td\u003e\n\u003ctd\u003e70-85W\u003c\/td\u003e\n\u003ctd\u003eBig clouds at high wattage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.2 Ohms XM\u003c\/td\u003e\n\u003ctd\u003e70-80W\u003c\/td\u003e\n\u003ctd\u003eDense vapour and strong flavour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4 Ohms XM\u003c\/td\u003e\n\u003ctd\u003e50-60W\u003c\/td\u003e\n\u003ctd\u003eA cooler vape, ideal for everyday use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.25 Ohms Dual Mesh\u003c\/td\u003e\n\u003ctd\u003e45-57W\u003c\/td\u003e\n\u003ctd\u003eDual mesh for rich flavour at lower wattage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eZ1, Z2 and the Classic Z Coils\u003c\/h4\u003e\n\u003cp\u003eGeekvape used short names on the first Z coils, so one resistance can carry two different names. Only the label changed. Check your last pack or the coil in your tank against this:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOlder name\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eRated wattage\u003c\/th\u003e\n\u003cth\u003eCurrent build\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ1\u003c\/td\u003e\n\u003ctd\u003e0.4 Ohms\u003c\/td\u003e\n\u003ctd\u003e50-60W\u003c\/td\u003e\n\u003ctd\u003e0.4 Ohms XM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ2\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e70-80W\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms XM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ 0.15\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e80-90W\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms XM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll three are the classic Z mesh coils. Please note: the classic 0.15 Ohms was rated a little higher than its XM replacement, at 80-90W against 70-85W.\u003c\/p\u003e\n\u003ch4\u003eThe XM Boost Upgrade\u003c\/h4\u003e\n\u003cp\u003eXM stands for eXtra Mesh, a denser mesh design that heats the e-liquid more evenly than the mesh it replaces. Geekvape rates an XM coil for 50 to 60ml of e-liquid, about twice the coil life of the classic Z build.\u003c\/p\u003e\n\u003ch4\u003eWhere These Coils Fit\u003c\/h4\u003e\n\u003cp\u003eThe Z coils are designed for use with the Zeus and Z sub-ohm tanks: the Zeus Sub-Ohm (original, 2021 and SE), the Z Sub-Ohm 5, the Z Fli and Z Fli 2, and the Obelisk 120 and 120 FC. Kits that come with one of those tanks use the same coils: the Aegis Legend 2, 3 and 5, the S100 (Aegis Solo 2), the Aegis Solo 3, the \u003ca href=\"\/products\/geekvape-t200-aegis-touch-vape-kit\" title=\"T200\"\u003eT200\u003c\/a\u003e, the Z200 and the \u003ca href=\"\/products\/geek-vape-obelisk-200w-vape-kit\" title=\"Obelisk 200\"\u003eObelisk 200\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTwo tanks in the Z family are not compatible with these coils. The Z Max uses the M Series coils, and the Z Nano 2 uses the smaller \u003ca href=\"\/products\/geekvape-b-series-boost-replacement-coils\" title=\"B Series coils\"\u003eB Series coils\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eHow long do Zeus coils last?\u003c\/h4\u003e\n\u003cp\u003eHigher wattage, sweet flavours and chain vaping all shorten coil life, so the number of tanks you get from one varies. Keeping each coil within the wattage range for its resistance helps it last longer. When the flavour starts to fade or the vapour drops off, it is time for a new coil.\u003c\/p\u003e\n\u003ch4\u003eHow do you prime a Z Series coil?\u003c\/h4\u003e\n\u003cp\u003eGeekvape recommends three to five minutes between filling the tank and your first puff. Season the coil with a few drops of e-liquid, fit it and fill the tank, then wait for it to soak. Priming this way prevents dry hits and a harsh first puff.\u003c\/p\u003e","brand":"Geek Vape","offers":[{"title":"0.15 Ohm - XM Mesh","offer_id":40577770848291,"sku":"GeekVape-Z-Coils-0.15-Ohm-XM-Mesh","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - XM Mesh","offer_id":57398311911797,"sku":"GeekVape-Z-Coils-0.2-Ohm-XM-Mesh","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.25 Ohm - Dual Mesh","offer_id":40577770815523,"sku":"GeekVape-Z-Coils-0.25-Ohm-Z-Mesh","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm - XM Mesh","offer_id":40577770881059,"sku":"GeekVape-Z-Coils-0.4-Ohm-XM-Mesh","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/Zeus-Replacement-Coils-by-Geek-Vape.jpg?v=1662797426"},{"product_id":"geekvape-b-series-boost-replacement-coils","title":"Geekvape B Series Boost Replacement Coils","description":"\u003cp\u003eThe Geekvape B Series coils are the push-fit replacement coils for the Aegis Boost family, the Aegis Hero family and every generation of the Z Nano tank. Supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e with a \u003cstrong\u003ekanthal (KA1) build\u003c\/strong\u003e. The range covers the full B Series line, \u003cstrong\u003eseven resistances from 0.15 Ohms to 1.2 Ohms\u003c\/strong\u003e. That takes you from a tight mouth-to-lung (MTL) draw at the 1.2 Ohms end up to full direct-to-lung (DTL) clouds at 0.15 Ohms.\u003c\/p\u003e\n\u003cp\u003eThe line splits into two builds. The 0.15 to 0.6 Ohms coils are the B Coil Boost Versions, the upgraded mesh builds, while the 0.8 and 1.2 Ohms pair are the B MTL Coils, the original construction kept in the range for mouth-to-lung vaping. The Boost Versions last around twice as long as the original B coils, and the two generations share the same interface, so they are fully interchangeable in any B Series device.\u003c\/p\u003e\n\u003ch4\u003eMatch the Resistance to Your Draw\u003c\/h4\u003e\n\u003cp\u003eAvailable in the following resistances, from full sub-ohm DTL down to the tightest MTL:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003eDraw Style\u003c\/th\u003e\n\u003cth\u003eE-Liquid\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.15 Ohms Boost Version\u003c\/td\u003e\n\u003ctd\u003e60-75W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003ctd\u003eHigh-VG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.2 Ohms Boost Version\u003c\/td\u003e\n\u003ctd\u003e50-58W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003ctd\u003eHigh-VG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3 Ohms Boost Version\u003c\/td\u003e\n\u003ctd\u003e30-38W\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003ctd\u003eHigh-VG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4 Ohms Boost Version\u003c\/td\u003e\n\u003ctd\u003e25-35W\u003c\/td\u003e\n\u003ctd\u003eRestricted direct-to-lung (RDL)\u003c\/td\u003e\n\u003ctd\u003eHigh-VG or 50\/50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms Boost Version\u003c\/td\u003e\n\u003ctd\u003e15-25W\u003c\/td\u003e\n\u003ctd\u003eLoose MTL or tight RDL\u003c\/td\u003e\n\u003ctd\u003e50\/50 or nic salts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8 Ohms B MTL\u003c\/td\u003e\n\u003ctd\u003e12-16W\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003ctd\u003e50\/50 or nic salts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2 Ohms B MTL\u003c\/td\u003e\n\u003ctd\u003e8-12W\u003c\/td\u003e\n\u003ctd\u003eTightest MTL in the range\u003c\/td\u003e\n\u003ctd\u003e50\/50 or nic salts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 0.15 Ohms coil is for vapers after maximum vapour, and it needs a mod that can deliver the wattage, an Aegis Mini 5 or a 510 mod, not a 40-50W Boost or Hero pod kit.\u003c\/p\u003e\n\u003ch4\u003eUniform Temperature Mesh\u003c\/h4\u003e\n\u003cp\u003eThe Boost Version coils, the 0.15 to 0.6 Ohms builds, use a mesh design that heats e-liquid evenly. The result is a faster ramp-up, denser vapour and fuller flavour. The 0.8 and 1.2 Ohms B MTL coils keep the original construction for a warmer, tighter draw.\u003c\/p\u003e\n\u003ch4\u003eHigh-Speed Cotton Wicking\u003c\/h4\u003e\n\u003cp\u003eReliable wicking keeps flavour consistent from the first puff to the last, and helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eExtended Coil Lifespan\u003c\/h4\u003e\n\u003cp\u003eA Boost Version coil is good for around 50-60ml of e-liquid, while the B MTL builds last around 20-30ml. Replace the coil when the flavour starts to fade or you get a burnt taste. Chain vaping, firing a coil above its rated wattage and skipping the priming step all reduce its lifespan, so prime it properly and keep it inside the range above.\u003c\/p\u003e\n\u003ch4\u003ePush In and Prime\u003c\/h4\u003e\n\u003cp\u003eFitting a B Series coil uses the simple push-fit system - take the old coil out and push the new one firmly into place. Fill the pod or tank, then leave it to stand for three to five minutes so the coil can fully saturate before first use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePack of 5 replacement coils\u003c\/li\u003e\n\u003cli\u003eKanthal (KA1) coil build across the range\u003c\/li\u003e\n\u003cli\u003eMesh coil build on the Boost Version coils\u003c\/li\u003e\n\u003cli\u003eSeven resistances from 0.15 Ohms to 1.2 Ohms\u003c\/li\u003e\n\u003cli\u003ePush-fit coil installation\u003c\/li\u003e\n\u003cli\u003eOriginal B MTL construction on the 0.8 and 1.2 Ohms coils for mouth-to-lung vaping\u003c\/li\u003e\n\u003cli\u003eFood-grade silicone\u003c\/li\u003e\n\u003cli\u003eTPD-compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\u003cli\u003e5 x Geekvape B Series Coil (in your chosen resistance)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch4\u003eCompatible With\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003cth\u003eCompatible Devices\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAegis Boost kits\u003c\/td\u003e\n\u003ctd\u003eAegis Boost, Boost Plus, Boost Luxury Edition (LE), Boost 2 (B60), Boost 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAegis Hero kits\u003c\/td\u003e\n\u003ctd\u003eAegis Hero, Aegis Hero 2 (H45), Aegis Hero Q, \u003ca href=\"\/products\/geek-vape-aegis-hero-5-vape-kit\" title=\"Aegis Hero 5\"\u003eAegis Hero 5\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement pods\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/geekvape-aegis-hero-5-replacement-pods\" title=\"Aegis Hero 5 Replacement Pods\"\u003eAegis Hero 5 Replacement Pods\u003c\/a\u003e, \u003ca href=\"\/products\/geekvape-aegis-force-empty-replacement-pods\" title=\"Aegis Force Empty Replacement Pods\"\u003eAegis Force Empty Replacement Pods\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTanks and mods\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/geekvape-z-nano-3-tank\" title=\"Z Nano 3\"\u003eZ Nano 3\u003c\/a\u003e, Z Nano, Z Nano 2, Z Nano MTL, Z50, Obelisk 65 FC, \u003ca href=\"\/products\/geek-vape-aegis-mini-5-vape-kit\" title=\"Aegis Mini 5\"\u003eAegis Mini 5\u003c\/a\u003e via its bundled Z Nano 3 tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePlease note: the Aegis Boost Pro and Boost Pro 2 use Geekvape's P Series coils, not the B Series, and so does the Obelisk 60 (it's the Obelisk 65 that uses the B). The Zeus sub-ohm tanks use Z Series coils, and the Wenax M family uses its own pods.\u003c\/p\u003e\n\u003ch4\u003eRecommended To Use With\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-VG e-liquids on the 0.15, 0.2 and 0.3 Ohms coils for sub-ohm DTL vaping\u003c\/li\u003e\n\u003cli\u003e50\/50 e-liquids on the 0.4, 0.6 and 0.8 Ohms coils\u003c\/li\u003e\n\u003cli\u003eNic salt e-liquids on the 0.6, 0.8 and 1.2 Ohms coils\u003c\/li\u003e\n\u003cli\u003eMTL, RDL and DTL draws, depending on the resistance you fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNic salt at 20mg suits the tight draw of the B MTL pair, 10mg works well on the 0.6 Ohms, and the sub-ohm Boost Versions are best for low-strength high-VG e-liquid.\u003c\/p\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003ch5\u003eDo B Series coils fit the Aegis Boost Pro?\u003c\/h5\u003e\n\u003cp\u003eNo. Both the Boost Pro and Boost Pro 2 are on Geekvape's P Series platform. The Aegis Boost 2 is different - it's badged B60 and does use B Series coils.\u003c\/p\u003e\n\u003ch5\u003eWhat's the difference between the Boost Version and the original B coils?\u003c\/h5\u003e\n\u003cp\u003eMainly lifespan - the newer Boost builds have about double the coil life of the originals, with fit unchanged. If your pack still says Aegis Boost coils, it's the same B Series range in the older packaging.\u003c\/p\u003e","brand":"Geek Vape","offers":[{"title":"0.15 Ohm - Boost","offer_id":57381235818869,"sku":"GeekVape-B-Coil-0.15-Ohm-B","price":10.95,"currency_code":"GBP","in_stock":false},{"title":"0.2 Ohm - Boost","offer_id":40571664433187,"sku":"GeekVape-B-Coil-0.2-Ohm-B","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohm - Boost","offer_id":40571664400419,"sku":"GeekVape-B-Coil-0.3-Ohm-B","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm - Boost","offer_id":40571664367651,"sku":"GeekVape-B-Coil-0.4-Ohm-B","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - Boost","offer_id":40571664334883,"sku":"GeekVape-B-Coil-0.6-Ohm-B","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm - B MTL","offer_id":57381235851637,"sku":"GeekVape-B-Coil-0.8-Ohm-B","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm - B MTL","offer_id":40571664302115,"sku":"GeekVape-B-Coil-1.2-Ohm-B","price":10.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/geekvape-b-series-boost-replacement-coils-0-2-ohm-gallery.jpg?v=1784828156"},{"product_id":"geekvape-g-replacement-coils","title":"Geek Vape G Replacement Coils","description":"\u003cp\u003eThe Geekvape G Series Replacement Coils are push-fit coils, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e and available in five resistance options: \u003cstrong\u003e0.6, 0.8, 1.0, 1.2 and 1.8 Ohms\u003c\/strong\u003e. Designed for both mouth-to-lung (MTL) and restricted direct-to-lung (RDTL) vaping, these mesh coils are rated at \u003cstrong\u003e13-18W\u003c\/strong\u003e on the 0.6 Ohms down to \u003cstrong\u003e7-9W\u003c\/strong\u003e on the 1.8 Ohms.\u003c\/p\u003e\n\u003cp\u003eThese are designed for use with a range of Geekvape's refillable pods, including the Aegis Pod, the Wenax Stylus, S-C and C1 pods, and the G18 Kit, and the table below pairs each resistance with the kits it is made for. When a coil reaches the end of its life you fit a new one and keep the pod. We recommend using nic salts or 50\/50 freebase e-liquids for mouth-to-lung vaping, and a high VG e-liquid for RDTL vaping.\u003c\/p\u003e\n\u003ch4\u003eG Coil Power Ranges\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003ePower Range\u003c\/th\u003e\n\u003cth\u003eMade for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eG0.6\u003c\/td\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003e13-18W\u003c\/td\u003e\n\u003ctd\u003eAegis Pod, Geekvape AP2, Wenax Stylus, Wenax S-C, Wenax C1, Digiflavor DU Pod Kit, DIGI-UNO Pod Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eG0.8\u003c\/td\u003e\n\u003ctd\u003e0.8 Ohms\u003c\/td\u003e\n\u003ctd\u003e12-15W\u003c\/td\u003e\n\u003ctd\u003eGeekvape AP2, Wenax C1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eG1.0\u003c\/td\u003e\n\u003ctd\u003e1.0 Ohms\u003c\/td\u003e\n\u003ctd\u003e10-12W\u003c\/td\u003e\n\u003ctd\u003eG Series pod kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eG1.2 M\u003c\/td\u003e\n\u003ctd\u003e1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e10-12W\u003c\/td\u003e\n\u003ctd\u003eWenax S-C, Digiflavor DU Pod Kit, DIGI-UNO Pod Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eG1.8\u003c\/td\u003e\n\u003ctd\u003e1.8 Ohms\u003c\/td\u003e\n\u003ctd\u003e7-9W\u003c\/td\u003e\n\u003ctd\u003eG18 Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 1.0 Ohms is a G Series coil rated at 10-12W, the same as the 1.2 Ohms, and it fits the same G Series pods. Please note: fit a new coil, fill the pod and then leave it for a few minutes before vaping, to avoid a burnt taste.\u003c\/p\u003e\n\u003ch4\u003eThe 1.2 Ohm Coils\u003c\/h4\u003e\n\u003cp\u003eThe 1.2 Ohms in this pack is the G1.2 M, rated at 10-12W, and it is made for the Wenax S-C along with the Digiflavor DU and DIGI-UNO pod kits. There are three different G coils at 1.2 Ohms. The plain G1.2 is rated at 9.5-11.5W for the Wenax Stylus, and the G1.2 S is rated at 8-12W for the G18 Kit, the Siren G MTL Tube Kit and the Siren G MTL Tank. If you have a Wenax Stylus, the other G coil for it is the 0.6 Ohms at 13-18W.\u003c\/p\u003e\n\u003ch4\u003eNot for Every Geekvape Kit\u003c\/h4\u003e\n\u003cp\u003eFor the Wenax kits, only the Stylus, the S-C and the C1 are compatible with a G coil. Geekvape's later Wenax kits use a cartridge pod with a built-in coil, and for a Wenax Q that means the \u003ca href=\"\/products\/geekvape-q-v2-replacement-pods\" title=\"GeekVape Q V2 Replacement Pods\"\u003eGeekVape Q V2 Replacement Pods\u003c\/a\u003e in 0.6, 0.8 or 1.2 Ohms rather than a coil.\u003c\/p\u003e\n\u003ch4\u003eAre these the same as the G coil ST and Aegis Pod coils?\u003c\/h4\u003e\n\u003cp\u003eYes, the name of this range has been changed from G coil ST, G coil Pod Formula and Aegis Pod coils to G Series, and you may see any of those names used. They are the same G Series coil. The old names include a G coil ST at 1.2 Ohms. The 1.2 Ohms in this pack is the G1.2 M, and there is a separate 1.2 Ohms coil for the Wenax Stylus.\u003c\/p\u003e","brand":"Geek Vape","offers":[{"title":"0.6 Ohm","offer_id":32866902933539,"sku":"GeekVape-G-Coil-0.6-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":39906231517219,"sku":"GeekVape-G-Coil-0.8-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm","offer_id":39906231549987,"sku":"GeekVape-G-Coil-1.0-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm","offer_id":32866902900771,"sku":"GeekVape-G-Coil-1.2-Ohm-M","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohm","offer_id":39906235449379,"sku":"GeekVape-G-Coil-1.8-Ohm","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/geekvape-gcoil-aegis-pod-replacement-coils.jpg?v=1668952368"},{"product_id":"geekvape-ns-replacement-coils","title":"Geekvape NS Replacement Coils","description":"\u003cp\u003eThe Geekvape Frenzy pod kit detects the NS coil you are using and can switch between power mode and temperature control. Geekvape NS Replacement Coils are supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e, available in \u003cstrong\u003e0.7, 1.2 and 1.6 Ohms\u003c\/strong\u003e. The Frenzy is compatible with the 0.7 and the 1.2 Ohms, and the Flint tank with the 1.2 and the 1.6 Ohms.\u003c\/p\u003e\n\u003cp\u003eThese are mouth-to-lung (MTL) and restricted direct-to-lung (RDTL) coils, with the 1.6 Ohms for a tighter, more cigarette-like draw. All three are best used with a 50\/50 freebase or nic salt e-liquid.\u003c\/p\u003e\n\u003ch4\u003eOutput Modes on the Frenzy\u003c\/h4\u003e\n\u003cp\u003eThe Frenzy automatically selects the mode: power mode for the 0.7 Ohms mesh coil, and temperature control for the 1.2 Ohms standard coil. You can then choose between 2.5V, 2.7V and 2.9V in power mode, and 420, 440 and 460°F in temperature control.\u003c\/p\u003e\n\u003ch4\u003eDraw Style by Coil\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDraw\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eBest vaped at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTight mouth-to-lung\u003c\/td\u003e\n\u003ctd\u003e1.6 Ohms\u003c\/td\u003e\n\u003ctd\u003e6 - 9W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMouth-to-lung\u003c\/td\u003e\n\u003ctd\u003e1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e8 - 12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRestricted direct-to-lung\u003c\/td\u003e\n\u003ctd\u003e0.7 Ohms mesh\u003c\/td\u003e\n\u003ctd\u003e8 - 12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThere is no adjustable wattage on either kit. The Flint lets you choose between 3.2V, 3.5V and 3.8V for the 1.2 and the 1.6 Ohms, and the Frenzy gives you three power levels for the 0.7 Ohms. Each kit has an adjustable airflow control, so you can tailor how tight or open the draw feels.\u003c\/p\u003e\n\u003ch4\u003eThe Frenzy and the Flint\u003c\/h4\u003e\n\u003cp\u003eThe Flint tank is fitted with the 1.6 Ohms. The 0.7 Ohms mesh coil is designed for use with the Frenzy and is also compatible with the Flint tank. Please note: Freemax NS Mesh coils for the Maxpod are not compatible with the Frenzy or the Flint.\u003c\/p\u003e\n\u003ch4\u003eHow long does an NS coil last?\u003c\/h4\u003e\n\u003cp\u003eCoil life will depend on how often you vape, as well as which power level you use. When the flavour starts to fade, replace the coil, and there are 5 in the pack.\u003c\/p\u003e\n\u003ch4\u003eHave Geekvape NS coils been discontinued?\u003c\/h4\u003e\n\u003cp\u003eThe NS coils have been discontinued by the manufacturer, and Geekvape's current coil ranges are made for its newer kits. All three resistances are here, so you can keep a Frenzy or a Flint going.\u003c\/p\u003e","brand":"Geek Vape","offers":[{"title":"0.7 Ohm","offer_id":32866908012579,"sku":"GeekVape-NS-Coil-0.7-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm","offer_id":32866908045347,"sku":"GeekVape-NS-Coil-1.2-Ohm","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"1.6 Ohm","offer_id":32866908078115,"sku":"GeekVape-NS-Coil-1.6-Ohm","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/geekvape-lns-coils.jpg?v=1668952845"},{"product_id":"geekvape-super-mesh-replacement-coils","title":"Geekvape Super Mesh Replacement Coils","description":"\u003cp\u003eGeekvape Super Mesh Replacement Coils give you two Super Mesh resistances, the \u003cstrong\u003e0.2 Ohms X1\u003c\/strong\u003e and the \u003cstrong\u003e0.3 Ohms X2\u003c\/strong\u003e, as well as a \u003cstrong\u003e0.15 Ohms IM4\u003c\/strong\u003e from Geekvape's IM coil range. Each pack contains \u003cstrong\u003e5 replacement coils\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese are direct-to-lung (DTL) coils, ideal for high VG e-liquids. The Super Mesh X coils are mesh KA1 coils. Choose from three resistances to match the wattage your mod can deliver.\u003c\/p\u003e\n\u003ch4\u003eThe Two Coil Ranges\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003ePower range\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eIM4\u003c\/td\u003e\n\u003ctd\u003eIM\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e60 - 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX1\u003c\/td\u003e\n\u003ctd\u003eSuper Mesh\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e60 - 70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eX2\u003c\/td\u003e\n\u003ctd\u003eSuper Mesh\u003c\/td\u003e\n\u003ctd\u003e0.3 Ohms\u003c\/td\u003e\n\u003ctd\u003e30 - 40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAdjustable power lets you set the wattage to suit the coil you are using.\u003c\/p\u003e\n\u003ch4\u003eShield, Aero, Aero Mesh and Cerberus\u003c\/h4\u003e\n\u003cp\u003eThese coils are designed for use with Geekvape's Cerberus, Aero, Aero Mesh and Shield tanks. The Aegis Mini kit comes with a Cerberus tank. The Illusion Mini tank is also compatible with the IM4. The Obelisk C tank uses the \u003ca href=\"\/products\/geekvape-s-series-replacement-coils\" title=\"S Series coils\"\u003eS Series coils\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eIs the X2 coil 0.3 Ohms or 0.4 Ohms?\u003c\/h4\u003e\n\u003cp\u003eThe X2 comes in two resistances, the original 0.3 Ohms in this pack and the newer 0.4 Ohms rated at 50 - 60W. So the code on its own will not tell you which coil you have. The resistance will.\u003c\/p\u003e","brand":"Geek Vape","offers":[{"title":"0.15 Ohm - IM4","offer_id":32866908536867,"sku":"GeekVape-SuperMesh-Coil-0.15-Ohm-IM4","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - X1","offer_id":32866908471331,"sku":"GeekVape-SuperMesh-Coil-0.2-Ohm-X1","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohm - X2","offer_id":32866908504099,"sku":"GeekVape-SuperMesh-Coil-0.3-Ohm-X2","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/geekvape-super-mesh-x1-coils.jpg?v=1662803449"},{"product_id":"voopoo-tpp-replacement-coils","title":"VooPoo TPP Replacement Coils","description":"\u003cp\u003eThe VooPoo TPP Replacement Coils are designed to deliver bold flavour and plenty of vapour for direct-to-lung (DTL) vaping. The coils each use a mesh heating element and are available in either \u003cstrong\u003e0.15, 0.2 or 0.3 Ohms\u003c\/strong\u003e, covering wattage ranges from \u003cstrong\u003e32W up to 100W\u003c\/strong\u003e. They are supplied in a \u003cstrong\u003epack of 3\u003c\/strong\u003e with a push-fit installation, made for the TPP pod tank and TPP-X pods on VooPoo's Drag and Argus kits.\u003c\/p\u003e\n\u003cp\u003eThe TPP-DM1 and the TPP-DM3 are both 0.15 Ohms, with the DM1 rated at 60-80W and the DM3 rated at 80-100W. Check the DM number on the coil, not the resistance. All four coils are best used with high VG e-liquid like a 70\/30 shortfill.\u003c\/p\u003e\n\u003ch4\u003ePatented Mesh Atomisation\u003c\/h4\u003e\n\u003cp\u003eVooPoo's patented build gives the heating element a larger surface area inside the coil. Expect a faster ramp up and a richer flavour.\u003c\/p\u003e\n\u003ch4\u003eDual In One Tech 2.0\u003c\/h4\u003e\n\u003cp\u003eThese coils use the upgraded Dual In One Tech 2.0 mesh. It delivers a denser, more layered vape and extends coil lifespan by 30% at 100W output.\u003c\/p\u003e\n\u003ch4\u003eDM1 to DM4\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003ePower Range\u003c\/th\u003e\n\u003cth\u003eVooPoo's Profile\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPP-DM1\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e60-80W\u003c\/td\u003e\n\u003ctd\u003eHigh Sweetness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPP-DM2\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e40-60W\u003c\/td\u003e\n\u003ctd\u003eRich and Dense\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPP-DM3\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e80-100W\u003c\/td\u003e\n\u003ctd\u003eBoosting Output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTPP-DM4\u003c\/td\u003e\n\u003ctd\u003e0.3 Ohms\u003c\/td\u003e\n\u003ctd\u003e32-40W\u003c\/td\u003e\n\u003ctd\u003eDelicate and Soft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eTailor the draw to your liking with the adjustable airflow on your tank. Close it down for a tighter inhale, or open it up for a looser draw.\u003c\/p\u003e\n\u003ch4\u003eWhere TPP Coils Fit\u003c\/h4\u003e\n\u003cp\u003eThese coils are made for the TPP platform, which covers the TPP tanks and pods along with the Drag and Argus kits built around them.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/voopoo-tpp-pod-tank-kit-with-coils-tpd-uk-stock-100-authentic\" title=\"TPP Pod Tank\"\u003eTPP Pod Tank\u003c\/a\u003e and TPP Pods - the original TPP tank and the refill pods for it\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/voopoo-tpp-x-pod-tank\" title=\"TPP-X Pod Tank\"\u003eTPP-X Pod Tank\u003c\/a\u003e and TPP-X Pods - the upgraded version, built for the higher wattages and compatible with all four coils\u003c\/li\u003e\n\u003cli\u003eMaat Tank New - the TPP tank on the Argus MT, Argus XT and Argus GT II\u003c\/li\u003e\n\u003cli\u003eDrag 3 and Drag X Plus - fitted with the TPP pod tank\u003c\/li\u003e\n\u003cli\u003eDrag X Pro - supplied with the TPP-DM2 and TPP-DM3\u003c\/li\u003e\n\u003cli\u003eDrag S Pro - supplied with the TPP-DM1 and TPP-DM4\u003c\/li\u003e\n\u003cli\u003eArgus MT - supplied with the TPP-DM2 and TPP-DM4\u003c\/li\u003e\n\u003cli\u003eArgus XT - supplied with the TPP-DM1 and TPP-DM2\u003c\/li\u003e\n\u003cli\u003eArgus GT II - compatible with all TPP coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: the Argus MT, Argus XT and Argus GT II are also available with the UForce-L tank fitted, and that tank is not compatible with TPP coils. It uses PnP-TW coils, so check which tank you have.\u003c\/p\u003e\n\u003ch4\u003eHow long does a TPP coil last?\u003c\/h4\u003e\n\u003cp\u003eVooPoo rates the TPP coils at up to 40mL of e-liquid at 100W output. Sweeter e-liquid and higher wattage shorten coil life. Change the coil when the flavour starts to fade. Please note: with a new coil, fill the tank and let it sit for a few minutes to allow the coil to saturate, which helps prevent dry hits.\u003c\/p\u003e\n\u003ch4\u003eDoes the Argus MT use MT coils?\u003c\/h4\u003e\n\u003cp\u003eNo. Despite its name, the Argus MT is compatible with all TPP coils when the Maat Tank New is fitted. MT coils are a different VooPoo range altogether, made for the Maat sub-ohm tank rather than the TPP tank on the Argus MT, so if those are the ones you are after, see the \u003ca href=\"\/products\/voopoo-mt-replacement-coils\" title=\"VooPoo MT Replacement Coils\"\u003eVooPoo MT Replacement Coils\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eWill PnP coils fit a TPP pod tank?\u003c\/h4\u003e\n\u003cp\u003ePnP coils are not compatible with the TPP pod tank, and TPP coils are not compatible with a PnP pod. The Drag 3, Drag X Plus, Drag S Pro and Drag X Pro are compatible with both ranges, although you need a PnP pod fitted for the PnP coils. For that range, see the \u003ca href=\"\/products\/voopoo-vinci-pnp-replacement-coils-5-pack\" title=\"VooPoo PnP coils\"\u003eVooPoo PnP coils\u003c\/a\u003e.\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"0.15 Ohm - DM1","offer_id":40571664007203,"sku":"Voopo-TPP-Coil-DM1-0.15-Ohm","price":13.45,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - DM3","offer_id":40577741914147,"sku":"Voopo-TPP-Coil-DM3-0.15-Ohm","price":13.45,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - DM2","offer_id":40571664039971,"sku":"Voopo-TPP-Coil-DM2-0.2-Ohm","price":13.45,"currency_code":"GBP","in_stock":true},{"title":"0.3 Ohm - DM4","offer_id":40577741946915,"sku":"Voopo-TPP-Coil-DM4-0.3-Ohm","price":13.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/VooPoo-TPP-Replacement-Coils-0.15Ohm-DM1.jpg?v=1777564108"},{"product_id":"voopoo-mt-replacement-coils","title":"VooPoo MT Replacement Coils","description":"\u003cp\u003eThe VooPoo MT Replacement Coils are available in \u003cstrong\u003esingle mesh\u003c\/strong\u003e, \u003cstrong\u003edual mesh\u003c\/strong\u003e and \u003cstrong\u003etriple mesh\u003c\/strong\u003e coil options, made for the VooPoo MAAT Sub-Ohm Tank and supplied in a \u003cstrong\u003epack of 3\u003c\/strong\u003e. All three are sub-ohm, direct-to-lung (DTL) coils at \u003cstrong\u003e0.13, 0.2 and 0.17 Ohms\u003c\/strong\u003e, with a wattage range of \u003cstrong\u003e55W to 85W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEach coil is built with KA1 mesh and organic cotton wicks. High VG e-liquid is ideal, at a 70VG\/30PG ratio or higher.\u003c\/p\u003e\n\u003ch4\u003eCheck the Coil\u003c\/h4\u003e\n\u003cp\u003eThe VooPoo Argus MT is not compatible with MT coils, whatever the MT letters suggest, and is designed for use with the \u003ca href=\"\/products\/voopoo-tpp-replacement-coils\" title=\"VooPoo TPP Replacement Coils\"\u003eVooPoo TPP Replacement Coils\u003c\/a\u003e instead. Please note: there is also a TPP-coil version of the MAAT tank, VooPoo's own MAAT Tank New. Check which coils your tank is compatible with first.\u003c\/p\u003e\n\u003ch4\u003eMesh Builds\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMesh\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle mesh\u003c\/td\u003e\n\u003ctd\u003eMT-M1\u003c\/td\u003e\n\u003ctd\u003e0.13 Ohms\u003c\/td\u003e\n\u003ctd\u003e60-85W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual mesh\u003c\/td\u003e\n\u003ctd\u003eMT-M2\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e55-80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriple mesh\u003c\/td\u003e\n\u003ctd\u003eMT-M3\u003c\/td\u003e\n\u003ctd\u003e0.17 Ohms\u003c\/td\u003e\n\u003ctd\u003e65-85W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe resistances do not follow the amount of mesh. Pick the resistance to suit the wattage you like to vape at.\u003c\/p\u003e\n\u003ch4\u003ePush-Fit Installation\u003c\/h4\u003e\n\u003cp\u003eEach MT coil has a simple push-fit installation. It clicks into the base of the tank, so you can change a coil in seconds.\u003c\/p\u003e\n\u003ch4\u003eCompatible With\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVooPoo MAAT Sub-Ohm Tank\u003c\/li\u003e\n\u003cli\u003eVooPoo Alpha Zip Kit\u003c\/li\u003e\n\u003cli\u003eVooPoo Alpha Zip Mini\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHow do I get the most from an MT coil?\u003c\/h4\u003e\n\u003cp\u003ePrime the coil each time you fit a new one. Set the wattage inside the range rated for the coil you are using. The MT-M2 is rated to 80W, where the MT-M1 and the MT-M3 both run up to 85W, so changing coil can mean changing your wattage as well.\u003c\/p\u003e","brand":"VooPoo","offers":[{"title":"0.13 Ohm - MT-M1 Single Mesh","offer_id":40540059729955,"sku":"Voopo-MT-Coil-0.13-Ohm-MT-M1","price":14.99,"currency_code":"GBP","in_stock":false},{"title":"0.17 Ohm - MT-M3 Triple Mesh","offer_id":40540059795491,"sku":"Voopo-MT-Coil-0.17-Ohm-MT-M3","price":14.99,"currency_code":"GBP","in_stock":false},{"title":"0.2 Ohm - MT-M2 Dual Mesh","offer_id":40540059762723,"sku":"Voopo-MT-Coil-0.2-Ohm-MT-M2","price":14.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/voopoo-mt-m3-triple-mesh-coils-017ohm.png?v=1662806586"},{"product_id":"smok-lp1-replacement-coils","title":"SMOK LP1 Replacement Coils","description":"\u003cp\u003eThe SMOK LP1 Replacement Coils are compatible with the Novo 4, Novo 4 Mini, Nfix Pro, Pozz Pro and RPM 25W pod kits, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e with a simple push-fit installation. The range runs \u003cstrong\u003efrom 0.8 Ohms up to 1.2 Ohms\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe Meshed 0.8 Ohms gives the most open draw in the range and the 1.2 Ohms feels the closest to a cigarette. Mesh coils heat fast for bold flavour; the dual-coil (DC) versions vape smoother and more mellow. Every coil suits 50\/50, high-PG e-liquid and nic salts.\u003c\/p\u003e\n\u003ch4\u003eThe Full LP1 Coil Range\u003c\/h4\u003e\n\u003cp\u003eEvery LP1 build sold in the UK, from a looser restricted direct-to-lung (DTL) draw to the tightest mouth-to-lung (MTL). SMOK's Novo 4 kit itself includes two of the Meshed 0.8 Ohms coils.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eDraw\u003c\/th\u003e\n\u003cth\u003eBest Wattage\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLP1 Meshed\u003c\/td\u003e\n\u003ctd\u003e0.8 Ohms\u003c\/td\u003e\n\u003ctd\u003eLoose MTL to restricted DTL\u003c\/td\u003e\n\u003ctd\u003e12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLP1 DC MTL\u003c\/td\u003e\n\u003ctd\u003e0.8 Ohms\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003ctd\u003e12-15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLP1 Meshed MTL\u003c\/td\u003e\n\u003ctd\u003e0.9 Ohms\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003ctd\u003e15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLP1 Turbo Mesh MTL\u003c\/td\u003e\n\u003ctd\u003e0.9 Ohms\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003ctd\u003e15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLP1 DC MTL\u003c\/td\u003e\n\u003ctd\u003e1.0 Ohms\u003c\/td\u003e\n\u003ctd\u003eTight MTL\u003c\/td\u003e\n\u003ctd\u003e10-15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLP1 Meshed\u003c\/td\u003e\n\u003ctd\u003e1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eTight, cigarette-like MTL\u003c\/td\u003e\n\u003ctd\u003e10-15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eLeak-Proof Triple Seal\u003c\/h4\u003e\n\u003cp\u003eEach coil carries a triple silicone ring seal to reduce leaks, and the push-fit design makes a coil change quick: remove the old coil, press the new one in, and refill.\u003c\/p\u003e\n\u003ch4\u003ePairing With E-Liquid\u003c\/h4\u003e\n\u003cp\u003eEvery LP1 coil suits 50\/50 and high-PG e-liquid as well as nic salts, the right match for an MTL draw. The 0.8 Ohms builds give a touch more vapour and sit well with a mid-strength salt or a 50\/50 freebase.\u003c\/p\u003e\n\u003ch4\u003eCompatible With\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSMOK Novo 4\u003c\/li\u003e\n\u003cli\u003eSMOK Novo 4 Mini\u003c\/li\u003e\n\u003cli\u003eSMOK Nfix Pro\u003c\/li\u003e\n\u003cli\u003eSMOK Pozz Pro\u003c\/li\u003e\n\u003cli\u003eSMOK RPM 25W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhich SMOK kits use the LP1 coil?\u003c\/h4\u003e\n\u003cp\u003eThe LP1 fits the Novo 4, Novo 4 Mini, Nfix Pro, Pozz Pro and RPM 25W. It is not the same as the LP2 coil, which fits the RPM 4 and other kits built around LP2 pods, so check the coil name before you buy.\u003c\/p\u003e\n\u003ch4\u003eWhy does my LP1 coil burn out quickly?\u003c\/h4\u003e\n\u003cp\u003eTwo things usually cause it. First, a new coil needs priming: fit it, fill the pod and wait a few minutes to allow the cotton to saturate, then take two or three gentle draws with the device off before you vape - SMOK's own recommended routine. Second, heavily sweetened e-liquids caramelise on a coil far faster than lighter flavours, and thick high-VG e-liquid wicks too slowly through a small MTL coil, which leads to dry hits. Prime properly and stick to 50\/50, high-PG or nic salts to get the most out of each one.\u003c\/p\u003e\n\u003ch4\u003eMy Novo 4 says no atomizer, or will not fire. What should I do?\u003c\/h4\u003e\n\u003cp\u003eNearly always the coil has not been pushed all the way in. Take it out, push it firmly back into the pod, and check the base of the pod is clean and dry before you refit it. If the screen shows an ohms too low warning instead, that points to a faulty coil rather than a seating problem - install a replacement coil.\u003c\/p\u003e\n","brand":"Smok","offers":[{"title":"0.8 Ohm - DC MTL","offer_id":40571663843363,"sku":"Smok-LP1-Coil-0.8-Ohm-DCMTL","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm - Meshed","offer_id":40571663876131,"sku":"Smok-LP1-Coil-0.8-Ohm-Mesh","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.9 Ohm - Meshed MTL","offer_id":40571663941667,"sku":"Smok-LP1-Coil-0.9-Ohm-Mesh","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"0.9 Ohm - Turbo Mesh MTL","offer_id":40571663974435,"sku":"Smok-LP1-Coil-0.9-Ohm-Turbo","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm - DC MTL","offer_id":57398312010101,"sku":"Smok-LP1-Coil-1.0-Ohm-DCMTL","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"1.2 Ohm - Meshed","offer_id":57398312042869,"sku":"Smok-LP1-Coil-1.2-Ohm-Mesh","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/Smok-LP1-Replacement-Coils-Dc-MTL-0.8Ohm.jpg?v=1723200229"},{"product_id":"smok-tfv16-replacement-coils","title":"SMOK TFV16 Replacement Coils","description":"\u003cp\u003eThe SMOK TFV16 Replacement Coils are made for the standard SMOK TFV16 tank, and they are not compatible with the TFV16 Lite. They are available in four resistances, \u003cstrong\u003e0.12, 0.15, 0.17 and 0.2 Ohms\u003c\/strong\u003e, and each one is a mesh coil for sub-ohm, direct-to-lung (DTL) vaping, supplied in a \u003cstrong\u003epack of 3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEach coil has an organic cotton wick and performs best with high VG e-liquid, 70% or above, for plenty of flavour and dense vapour.\u003c\/p\u003e\n\u003ch4\u003eRecommended Wattages\u003c\/h4\u003e\n\u003cp\u003eThese are the settings each coil is best vaped at, so you will need a mod with variable wattage to set them.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSMOK's name\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eRecommended wattage\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConical Mesh\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e60 - 85W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriple Mesh\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e90W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003ctd\u003e0.17 Ohms\u003c\/td\u003e\n\u003ctd\u003e120W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Mesh\u003c\/td\u003e\n\u003ctd\u003e0.12 Ohms\u003c\/td\u003e\n\u003ctd\u003e120W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eNot the TFV16 Lite\u003c\/h4\u003e\n\u003cp\u003ePlease note: the TFV16 Lite is a different tank, and it has a coil range of its own with two coils in it rather than four. Both ranges include a 0.2 Ohms Conical Mesh, the same resistance and the same build name in two different coils. A Lite coil does not fit. For a Lite, you need our \u003ca href=\"\/products\/smok-tfv16-lite-replacement-coils\" title=\"SMOK TFV16 Lite Replacement Coils\"\u003eSMOK TFV16 Lite Replacement Coils\u003c\/a\u003e, and the coils for the full-size TFV18 and the TFV18 Mini are on our \u003ca href=\"\/products\/smok-tfv18-replacement-coils\" title=\"SMOK TFV18 Replacement Coils\"\u003eSMOK TFV18 Replacement Coils\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch4\u003eWhich tank do I have, the TFV16 or the TFV16 Lite?\u003c\/h4\u003e\n\u003cp\u003eThe two tanks are not interchangeable, so check the coils you bought last time. The Lite range is two coils, a 0.15 Ohms Dual Mesh and a 0.2 Ohms Conical Mesh, and the four resistances on this page fit the standard TFV16.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between the four coils?\u003c\/h4\u003e\n\u003cp\u003eEach coil takes its name from the mesh build inside it, and the plain Mesh is the single-mesh option of the four. Match the recommended wattage to what your mod can set, rather than going by the name.\u003c\/p\u003e\n\u003ch4\u003eHow long does a TFV16 coil last?\u003c\/h4\u003e\n\u003cp\u003eThe wattage you set, how often you vape and whether the coil was primed all change how long one lasts. Fill the tank and wait a few minutes before the first draw so the coil can absorb e-liquid, which helps prevent a dry hit, and top up before the tank runs dry.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.12 Ohm - Dual Mesh","offer_id":40571663646755,"sku":"Smok-TFV16Mesh-Coil-0.12-Ohm-Dual","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.15 Ohm - Triple Mesh","offer_id":40571663613987,"sku":"Smok-TFV16Mesh-Coil-0.15-Ohm-Triple","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.17 Ohm - Mesh","offer_id":40571663581219,"sku":"Smok-TFV16Mesh-Coil-0.17-Ohm-Single","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm - Conical Mesh","offer_id":40571663548451,"sku":"Smok-TFV16Mesh-Coil-0.2-Ohm-Conic","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/SMOK-TFV16-Mesh-Replacement-Coils.jpg?v=1724608475"},{"product_id":"aspire-nautilus-replacement-coils","title":"Aspire Nautilus Replacement Coils","description":"\u003cp\u003eThe Aspire Nautilus Replacement Coils are available in a \u003cstrong\u003e1.8 Ohms\u003c\/strong\u003e or \u003cstrong\u003e1.6 Ohms\u003c\/strong\u003e BVC (bottom vertical coil), a \u003cstrong\u003e1.0 Ohms Mesh\u003c\/strong\u003e, two \u003cstrong\u003e0.7 Ohms\u003c\/strong\u003e coils, a \u003cstrong\u003e0.4 Ohms\u003c\/strong\u003e standard coil and a \u003cstrong\u003e0.3 Ohms Mesh\u003c\/strong\u003e, supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. The wattages range from \u003cstrong\u003e7W to 28W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 1.8, 1.6 and 1.0 Ohms are mouth-to-lung (MTL) coils, while the 0.7 pair and the 0.4 and 0.3 Ohms give a restricted direct-to-lung vape. Keep the e-liquid at 50% PG or more: nic salts, a 50\/50 freebase or a high PG blend. This is not a high-VG shortfill range.\u003c\/p\u003e\n\u003ch4\u003eEvery Coil in the Range\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eAspire's name\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003ePower range\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNautilus BVC Coil\u003c\/td\u003e\n\u003ctd\u003e1.8 Ohms\u003c\/td\u003e\n\u003ctd\u003e10 - 14W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNautilus BVC Coil\u003c\/td\u003e\n\u003ctd\u003e1.6 Ohms\u003c\/td\u003e\n\u003ctd\u003e7 - 11W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNautilus Mesh Coil\u003c\/td\u003e\n\u003ctd\u003e1.0 Ohms\u003c\/td\u003e\n\u003ctd\u003e13 - 15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNautilus 2S Mesh Coil\u003c\/td\u003e\n\u003ctd\u003e0.7 Ohms\u003c\/td\u003e\n\u003ctd\u003e20 - 25W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNautilus 2 Coil\u003c\/td\u003e\n\u003ctd\u003e0.7 Ohms\u003c\/td\u003e\n\u003ctd\u003e18 - 23W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNautilus 2S Coil\u003c\/td\u003e\n\u003ctd\u003e0.4 Ohms\u003c\/td\u003e\n\u003ctd\u003e23 - 28W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNautilus Mesh Coil\u003c\/td\u003e\n\u003ctd\u003e0.3 Ohms\u003c\/td\u003e\n\u003ctd\u003e23 - 28W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe Nautilus 2 Coil and the Nautilus 2S Coil are standard coils rather than mesh.\u003c\/p\u003e\n\u003ch4\u003eWhere Each Coil Fits\u003c\/h4\u003e\n\u003cp\u003eThese coils are designed for use with the Nautilus 3 series (3, 3², 3S and 3SR) and the Nautilus GT II, along with the Zelos X80, Zelos 3, Zelos X, Zelos M80 and Rhea X kits. The Nautilus Nano and the Zelos Nano are compatible with the 0.7 pair, the 1.0 Ohms Mesh, the 1.6 and the 1.8 Ohms. On the Nautilus Mini it is the 1.6 and 1.8 Ohms, and on the K3 tank it is the 1.8 Ohms.\u003c\/p\u003e\n\u003cp\u003eOn the older tanks the lists are shorter: the original Nautilus uses the 1.6 and 1.8 Ohms BVC coils, the Nautilus 2 adds its own 0.7 Ohms coil to that pair, and the Nautilus 2S is compatible with the 0.4 Ohms and the 0.7 pair as well. The Nautilus GT and GT Mini and the Zelos 2 kit are also compatible with these coils, and the Aspire Plato needs its original adaptor.\u003c\/p\u003e\n\u003cp\u003ePlease note: Aspire's older clearomizers use the BVC name as well, but they are not compatible with these coils. Those tanks use our \u003ca href=\"\/products\/aspire-bvc-replacement-coils\" title=\"Aspire BVC Replacement Coils\"\u003eAspire BVC Replacement Coils\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch4\u003eThe AIO NS Coil\u003c\/h4\u003e\n\u003cp\u003eThe 1.8 Ohms AIO NS is the nic salt coil in the family, made for the Nautilus AIO and the Nautilus Prime X. The Prime X comes with a Nautilus pod, and that pod is compatible with these coils.\u003c\/p\u003e\n\u003ch4\u003eWhich 0.7 Ohms coil do I need?\u003c\/h4\u003e\n\u003cp\u003eThere are two Aspire coils at 0.7 Ohms: the Nautilus 2S Mesh Coil and the Nautilus 2 Coil. Both are designed for use with the same tanks and kits. The mesh coil is best vaped at wattages between 20 - 25W, and the standard coil between 18 - 23W.\u003c\/p\u003e\n\u003ch4\u003eWill these fit a Nautilus X or Nautilus XS?\u003c\/h4\u003e\n\u003cp\u003eNo, these coils are not compatible with the Nautilus X or the Nautilus XS. Both tanks are designed for use with different Aspire coils, and one of those is also a 0.7 Ohms Mesh, so check the tank a coil is designed for and not only the resistance.\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.3 Ohm - Mesh","offer_id":40576297402403,"sku":"Aspir-Nautilu-Coil-0.3-Ohm-Mesh","price":8.99,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm","offer_id":39476845576227,"sku":"Aspir-Nautilu-Coil-0.4-Ohm","price":8.99,"currency_code":"GBP","in_stock":false},{"title":"0.7 Ohm","offer_id":39476845608995,"sku":"Aspir-Nautilu-Coil-0.7-Ohm","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.7 Ohm - 2S Mesh","offer_id":39476845740067,"sku":"Aspir-Nautilu-Coil-2S-0.7-Ohm","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 Ohm - Mesh","offer_id":39476845641763,"sku":"Aspir-Nautilu-Coil-1.0-Ohm-Mesh","price":8.99,"currency_code":"GBP","in_stock":false},{"title":"1.6 Ohm","offer_id":39476845674531,"sku":"Aspir-Nautilu-Coil-1.6-Ohm","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohm","offer_id":39476845707299,"sku":"Aspir-Nautilu-Coil-1.8-Ohm","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohm - AIO NS","offer_id":40575850348579,"sku":"Aspir-Nautilu-Coil-1.8-AIO-NS","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/Aspire-Nautilus-Mesh-Replacement-Coils.png?v=1662802363"},{"product_id":"innokin-sceptre-s-replacement-coils","title":"Innokin S Coil (Sceptre \u0026 Sceptre S Replacement Coils)","description":"\u003cp\u003eWith the Innokin S Coil range you set the airflow on your Sceptre to match the coil you fit: close it down for a mouth-to-lung (MTL) coil, and open it up for a restricted direct-to-lung (RDL) mesh coil. Innokin's S Coils are designed for use with the Sceptre, Sceptre 2 and Sceptre Tube kits, and with the replacement pods for them. They are supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e, in \u003cstrong\u003e0.25 Ohms, 0.5 Ohms, 0.6 Ohms, 0.65 Ohms and 1.2 Ohms\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 0.25, 0.5, 0.6 and 0.65 Ohms are mesh coils, and the 1.2 Ohms is a standard coil. Innokin's 0.5 Ohms RDL mesh is easy on battery life and e-liquid. The Sceptre coils are suited to e-liquids that are 50% PG or higher, nic salts included.\u003c\/p\u003e\n\u003ch4\u003eMatch the Airflow\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eBuild\u003c\/th\u003e\n\u003cth\u003eAirflow\u003c\/th\u003e\n\u003cth\u003eBest vaped at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.25 Ohms, Sensis only\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003ctd\u003eOpen it up, RDL\u003c\/td\u003e\n\u003ctd\u003e25 to 35W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.5 Ohms\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003ctd\u003eOpen it up, RDL\u003c\/td\u003e\n\u003ctd\u003e18 to 20W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003ctd\u003eClose it down, MTL\u003c\/td\u003e\n\u003ctd\u003e9 to 12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.65 Ohms\u003c\/td\u003e\n\u003ctd\u003eMesh\u003c\/td\u003e\n\u003ctd\u003eClose it down, MTL\u003c\/td\u003e\n\u003ctd\u003e10 to 12.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003ctd\u003eClose it down, MTL\u003c\/td\u003e\n\u003ctd\u003e9 to 10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eInnokin's 1.2 Ohms MTL coil is golden and its 0.5 Ohms RDL mesh silver.\u003c\/p\u003e\n\u003ch4\u003eIs the 0.5 Ohms coil MTL or RDL?\u003c\/h4\u003e\n\u003cp\u003eIt is an RDL coil, paired with the expanded airflow setting. Open it up for a looser draw and more vapour. It is a mesh build vaped at 18 to 20 watts, where the MTL coils in the range are vaped at 9 to 12.5 watts and under.\u003c\/p\u003e\n\u003ch4\u003eDoes the 0.25 Ohms coil fit the Sceptre?\u003c\/h4\u003e\n\u003cp\u003eNo. The 0.25 Ohms is only compatible with the Innokin Sensis pod kit and Sensis pods. Innokin gives the Sceptre a resistance range of 0.5 Ohms to 3.5 Ohms, so a 0.25 Ohms coil is below what a Sceptre is built for. Fill the pod with a high VG e-liquid, 60% VG or more.\u003c\/p\u003e\n","brand":"Innokin","offers":[{"title":"0.25 Ohm - Mesh RDL (Sensis only)","offer_id":40578786459683,"sku":"Innokin-S(Sceptre)-Coil-0.25-Ohm","price":6.95,"currency_code":"GBP","in_stock":false},{"title":"0.5 Ohm - Mesh RDL","offer_id":40571663450147,"sku":"Innokin-S(Sceptre)-Coil-0.5-Ohm-Mesh","price":6.95,"currency_code":"GBP","in_stock":false},{"title":"0.6 Ohm - Mesh MTL","offer_id":40578786492451,"sku":"Innokin-S(Sceptre)-Coil-0.6-Ohm","price":6.95,"currency_code":"GBP","in_stock":false},{"title":"0.65 Ohm - Mesh MTL","offer_id":40571663515683,"sku":"Innokin-S(Sceptre)-Coil-0.65-Ohm","price":6.95,"currency_code":"GBP","in_stock":false},{"title":"1.2 Ohm - MTL","offer_id":40571663482915,"sku":"Innokin-S(Sceptre)-Coil-1.2-Ohm","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/Innokin-S-Coils-Innokin-Sceptre-Coils.png?v=1662804346"},{"product_id":"innokin-endura-t20-replacement-coils","title":"Innokin Endura T20 Replacement Coils","description":"\u003cp\u003eThe Innokin Endura T20 Replacement Coils are the Prism T20 coils, designed for use with the Endura T20 kit and the Prism T20 tank. Each pack contains five coils in a single \u003cstrong\u003e1.5 Ohms\u003c\/strong\u003e resistance, for \u003cstrong\u003emouth-to-lung (MTL)\u003c\/strong\u003e vaping.\u003c\/p\u003e\n\u003cp\u003eThe 1.5 Ohms produces a tight draw, similar to a cigarette, with a satisfying throat hit. These coils are best paired with high PG e-liquids, either 50\/50 freebase or nicotine salts.\u003c\/p\u003e\n\u003ch4\u003eFour Innokin 1.5 Ohms\u003c\/h4\u003e\n\u003cp\u003eInnokin uses the same 1.5 Ohms resistance in four of its coil ranges. Only this one is made for the T20. The \u003ca href=\"\/products\/innokin-prism-s-replacement-coils\" title=\"Innokin Prism S Replacement Coils\"\u003eInnokin Prism S Replacement Coils\u003c\/a\u003e are for use in the Endura T20S, the Prism T20S tank, the EZ.WATT and the Endura Apex. Please note: these coils are not compatible with the T18, T18E or T22 tanks.\u003c\/p\u003e\n\u003ch4\u003eChanging the T20 Coil\u003c\/h4\u003e\n\u003cp\u003eThere is a 510 connector on the base of every coil, so you can change one without having to empty the tank. With the tank still filled, unscrew the base and swap the old coil for a new one. Then leave it a few minutes before your first draw so the liquid can soak in.\u003c\/p\u003e\n\u003ch4\u003eHow do I know if I need a Prism T20 or a Prism S coil?\u003c\/h4\u003e\n\u003cp\u003eAn Endura T20 uses the Prism T20 coil, and an Endura T20S uses the Prism S. The Prism S range also includes a 0.8 Ohms and a 0.9 Ohms Mesh, and none of the Prism S coils is compatible with a T20. Both ranges have a 1.5 Ohms, so choose by the kit you are using and not the resistance.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"1.5 Ohm","offer_id":39530053992483,"sku":"Innok-EnduraT20-Coil-1.5-Ohm","price":7.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/innokin-prism-t20-replacement-coils_6736efd9-0af9-47c7-bc2b-57ba1b95ee94.jpg?v=1668948667"},{"product_id":"innokin-endura-m18-replacement-coils","title":"Innokin Endura M18 Replacement Coils","description":"\u003cp\u003eThe Innokin Endura M18 Replacement Coils are rated at \u003cstrong\u003e10 to 13.5W\u003c\/strong\u003e, which is the M18's own pair of power modes: 10W regular, and 13.5W on boost. Each coil is \u003cstrong\u003e1.6 Ohms\u003c\/strong\u003e with a BVC (Bottom Vertical Coil) build, and they are \u003cstrong\u003esupplied in a pack of 5\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese are KA1 coils for mouth-to-lung (MTL) vaping, designed for use with the Innokin Endura M18 pod kit and also compatible with the Endura T22 Pro. For e-liquid, we advise using nic salts or a high-PG blend of 50% PG or more.\u003c\/p\u003e\n\u003ch4\u003eRegular and Boost\u003c\/h4\u003e\n\u003cp\u003eTo change between the two, hold the button with the M18 switched off, then release on the setting you want. Regular is 10W. Boost is 13.5W, for a warmer vape with more flavour, and it is the top of what this coil is rated for.\u003c\/p\u003e\n\u003ch4\u003eThe Pod You Keep\u003c\/h4\u003e\n\u003cp\u003eThe M18 pod is refillable, so the coil is the only part you replace. It has to be empty first. Twist the base to open it and lift it off, then take the old coil out, fit the new one and twist the base back on. Innokin recommends five minutes after filling before you vape a new coil.\u003c\/p\u003e\n\u003ch4\u003eThe T18E Alternative\u003c\/h4\u003e\n\u003cp\u003eThe BVC is Innokin's upgraded coil for the M18, and it is not the only one that fits. If you prefer the original Endura character, our \u003ca href=\"\/products\/innokin-endura-t18e-replacement-coils\" title=\"Innokin Endura T18E Replacement Coils\"\u003eInnokin Endura T18E Replacement Coils\u003c\/a\u003e fit the M18 as well. The pod is compatible with either one. Please note: those are the two coils made for the M18, and the Prism T18 is a longer coil made for the T18 and T22 tanks.\u003c\/p\u003e\n\u003ch4\u003eAirflow on the M18\u003c\/h4\u003e\n\u003cp\u003eYou adjust the airflow by rotating the pod, not by changing the coil. Insert it with the three lines towards the LED side for an open draw. The other way round gives a tighter one.\u003c\/p\u003e\n\u003ch4\u003eHow long does an Innokin Endura M18 coil last?\u003c\/h4\u003e\n\u003cp\u003eInnokin's instruction is to replace the coil when there is a reduction in flavour or vapour, and to change it straight away if there is a burnt taste. Two things help: give a new coil its five minutes after filling, and do not vape the M18 when the pod is empty.\u003c\/p\u003e\n\u003ch4\u003eWhy is my M18 flashing instead of firing?\u003c\/h4\u003e\n\u003cp\u003eTwo of the M18's LED warnings are about the coil, not the battery. White LEDs lit for five seconds mean the coil resistance is reading low, and ten flashes mean it is reading high; Innokin's answer to both is to check the coil or replace it. Take the coil out, keep the pod and battery contacts clean of e-liquid and debris, then fit it back into the pod. Please note: ten flashes also covers the M18's vape timeout, which is a ten-second limit on a single draw, so that code means two things.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"1.6 Ohm","offer_id":39530058481699,"sku":"Innok-EnduraM18-Coil-1.6-Ohm","price":8.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/Innokin-M18-Endura-Replacement-Coils.png?v=1668954021"},{"product_id":"uwell-crown-4-replacement-coils","title":"Uwell Crown 4 Replacement Coils","description":"\u003cp\u003eThe Uwell Crown 4 Replacement Coils are best paired with a \u003cstrong\u003ehigh VG e-liquid\u003c\/strong\u003e, and all three are \u003cstrong\u003edirect-to-lung (DTL)\u003c\/strong\u003e coils. Available in \u003cstrong\u003e0.2, 0.23 and 0.4 Ohms\u003c\/strong\u003e, supplied \u003cstrong\u003ein a pack of 4\u003c\/strong\u003e, with wattage ranges \u003cstrong\u003eup to 80W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 0.2 and the 0.4 Ohms are dual coils in SS904L stainless steel, and the 0.23 Ohms a UN2 single mesh coil in FeCrAl. Every one of them is made for the Uwell Crown 4 sub-ohm tank.\u003c\/p\u003e\n\u003ch4\u003eCrown 4 Coil Options\u003c\/h4\u003e\n\u003cp\u003eThe Crown 4 kit is supplied with the same \u003ca href=\"\/products\/uwell-crown-4-iv-sub-ohm-tank\" title=\"Uwell Crown 4 Sub Ohm Tank\"\u003eUwell Crown 4 Sub Ohm Tank\u003c\/a\u003e, and these coils fit the kit as well. The kit's maximum output is 200W, so you can set any of the three to the wattage range it is rated for.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eWire\u003c\/th\u003e\n\u003cth\u003eWattage range\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual coil\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eSS904L\u003c\/td\u003e\n\u003ctd\u003e70-80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual coil\u003c\/td\u003e\n\u003ctd\u003e0.4 Ohms\u003c\/td\u003e\n\u003ctd\u003eSS904L\u003c\/td\u003e\n\u003ctd\u003e60-70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUN2 single mesh\u003c\/td\u003e\n\u003ctd\u003e0.23 Ohms\u003c\/td\u003e\n\u003ctd\u003eFeCrAl\u003c\/td\u003e\n\u003ctd\u003e60-70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 0.4 and the 0.23 Ohms have the same wattage range, 60-70W. Choose between those two on the build: one is a dual coil, the other a single mesh coil with the larger surface area. Uwell also builds a UN1 single mesh coil in SS304 at 0.25 Ohms for the Crown 4 tank, rated for 55-65W.\u003c\/p\u003e\n\u003cp\u003ePlease note: there is a 0.23 Ohms coil for the Uwell Crown 5 as well. That one is designed for use with the Crown 5 tank, its wattage range is 65-70W, and it is not compatible with the Crown 4, so check your tank is a Crown 4 and not a Crown 5.\u003c\/p\u003e\n\u003ch4\u003eThe Double Helix Coil\u003c\/h4\u003e\n\u003cp\u003eUwell's Double Helix coils are designed for even heating. The steel Uwell uses is the higher quality steel found in luxury watches, delivering both flavour and a longer coil life.\u003c\/p\u003e\n\u003ch4\u003eSelf-Cleaning Technology\u003c\/h4\u003e\n\u003cp\u003eEvery Crown 4 coil is fitted with Uwell's Self-Cleaning Technology. As you vape, the coil can vaporise the e-liquid in its condensation holder, which helps reduce leaks and waste and keeps tank cleaning to a minimum.\u003c\/p\u003e\n\u003ch4\u003eWhy does a new Crown 4 coil taste burnt?\u003c\/h4\u003e\n\u003cp\u003eOn a new coil, a burnt taste normally means it has not been primed. When you first fill the tank, let the coil soak for a few minutes before your first draw, which helps you avoid dry hits. If the burnt taste is still there, check the wattage is inside the coil's own range in the table above, and that your e-liquid is a high VG blend. That is what all three of these coils are made for.\u003c\/p\u003e\n\u003ch4\u003eWhich coil does the Crown 4 tank come with?\u003c\/h4\u003e\n\u003cp\u003eThe tank comes with the 0.4 Ohms fitted and a spare 0.2 Ohms in the box, which means both of them are dual coils in SS904L. Neither mesh coil ships with it. If the power is where you want it and the build is what you want to change, the 0.23 UN2 is rated for the same wattage range as the 0.4 you already have.\u003c\/p\u003e","brand":"Uwell","offers":[{"title":"0.2 Ohm","offer_id":39530100686883,"sku":"Uwell-Crown4IV-Coil-0.2-Ohm","price":9.45,"currency_code":"GBP","in_stock":false},{"title":"0.23 Ohm","offer_id":39530100752419,"sku":"Uwell-Crown4IV-Coil-0.23-Ohm","price":9.45,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm","offer_id":39530100719651,"sku":"Uwell-Crown4IV-Coil-0.4-Ohm","price":9.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/crown-iv-replacement-coil.png?v=1668969076"},{"product_id":"innokin-isub-replacement-coils","title":"Innokin iSub Replacement Coils","description":"\u003cp\u003eThe Innokin iSub Replacement Coils are fitted with a built-in 510 pin and supplied in a pack of 5, available in \u003cstrong\u003e0.2 Ohms\u003c\/strong\u003e, a \u003cstrong\u003e0.5 Ohms Clapton\u003c\/strong\u003e, \u003cstrong\u003e1.0 Ohms\u003c\/strong\u003e, \u003cstrong\u003e1.2 Ohms\u003c\/strong\u003e and \u003cstrong\u003e2.0 Ohms\u003c\/strong\u003e. Innokin's No-Spill Coil Swap System means you can change a coil without emptying the tank first.\u003c\/p\u003e\n\u003cp\u003eThe 0.2 Ohms and the 0.5 Ohms Clapton are sub ohm, for direct-to-lung (DTL) vaping, and the 2.0 Ohms is designed for mouth-to-lung (MTL). The 1.0 Ohms and 1.2 Ohms are higher resistance coils as well, and typically suited to MTL. Sub ohm coils need an advanced kit, so the 0.2 Ohms and the Clapton are best suited to a mod, and the three higher resistances to a lower-powered device. Airflow on the iSub tank is fully adjustable, which lets you tailor how tight or open the draw feels.\u003c\/p\u003e\n\u003ch4\u003eEvery iSub Tank\u003c\/h4\u003e\n\u003cp\u003eThese coils are compatible with the full range of Innokin iSub tanks: the iSub, iSub G, iSub S, iSub V, and the iSub Apex in its 3ml and 5ml versions. The iSub-B is compatible too. The coil for the iSub-B is the iSub Series, so you do not need a different coil for that tank.\u003c\/p\u003e\n\u003ch4\u003eVertical DeepCoil\u003c\/h4\u003e\n\u003cp\u003eThe iSub coil uses Innokin's Vertical DeepCoil design, housed with Japanese organic cotton. The cotton improves flavour, and it also means less waiting before a new coil is ready to vape.\u003c\/p\u003e\n\u003ch4\u003eMatch the E-Liquid\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour e-liquid\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh VG, 60% and above\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms or 0.5 Ohms Clapton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh PG, 50% and above\u003c\/td\u003e\n\u003ctd\u003e2.0 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 1.0 Ohms and 1.2 Ohms suit the same high PG e-liquid as the 2.0 Ohms. Each iSub coil has a wattage range shown on the side of the coil and on the packaging, so you can adjust the wattage to match. Check the resistance on the coil in your tank before selecting.\u003c\/p\u003e\n\u003ch4\u003eWhich coil replaces a 0.5 Ohms iSub coil?\u003c\/h4\u003e\n\u003cp\u003eThe 0.5 Ohms Clapton. The original iSub tank is supplied with two 0.5 Ohms coils, so the Clapton is the 0.5 Ohms option, and the one to choose if you are replacing one of those.\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"0.2 Ohm","offer_id":39541808136227,"sku":"Innok-iSub-Coil-0.2-Ohm","price":7.49,"currency_code":"GBP","in_stock":true},{"title":"0.5 Ohm - Clapton","offer_id":39541808168995,"sku":"Innok-iSub-Coil-Clapt0.5-Ohm","price":7.49,"currency_code":"GBP","in_stock":false},{"title":"1.0 Ohm","offer_id":40578782101539,"sku":"Innok-iSub-Coil-1.0-Ohm","price":7.49,"currency_code":"GBP","in_stock":false},{"title":"1.2 Ohm","offer_id":40578782068771,"sku":"Innok-iSub-Coil-1.2-Ohm","price":7.49,"currency_code":"GBP","in_stock":false},{"title":"2.0 Ohm","offer_id":40578782036003,"sku":"Innok-iSub-Coil-2.0-Ohm","price":7.49,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/isub-replacement-coil-box.png?v=1668957130"},{"product_id":"uwell-caliburn-g-g2-replacement-coils","title":"Uwell Caliburn G \/ G2 Replacement Coils","description":"\u003cp\u003eThe Uwell Caliburn G \u0026amp; G2 Replacement Coils are Uwell's \u003cstrong\u003eCaliburn G Coil\u003c\/strong\u003e and \u003cstrong\u003eCaliburn G2 Coil\u003c\/strong\u003e, supplied in a \u003cstrong\u003epack of 4\u003c\/strong\u003e. The Caliburn G Coil is the \u003cstrong\u003e0.8 Ohms\u003c\/strong\u003e and the \u003cstrong\u003e1.0 Ohms\u003c\/strong\u003e; the Caliburn G2 Coil is the \u003cstrong\u003e1.2 Ohms\u003c\/strong\u003e. The 0.8 and 1.2 are \u003cstrong\u003eUN2 Meshed-H\u003c\/strong\u003e mesh coils, the 1.0 is a standard coil, and all three are \u003cstrong\u003epush-fit\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThese coils fit thirteen kits across the Caliburn range, from the G and G2 through the GK2, X, Tenet, GZ2, KOKO Prime, the Caliburn \u0026amp; IronFist L and the Explorer. Please note: many Caliburn kits use pods with the coil built into the pod, so they are not compatible with these coils, the G3 and GK3 included.\u003c\/p\u003e\n\u003ch4\u003e0.8, 1.0 and 1.2 Ohms\u003c\/h4\u003e\n\u003cp\u003eThree to choose from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.8 Ohms UN2 Meshed-H - the mesh coil with a looser draw, suited to smoother mouth-to-lung (MTL) and restricted direct-to-lung (RDTL) styles depending on the kit\u003c\/li\u003e\n\u003cli\u003e1.0 Ohms - the standard coil, for a tighter MTL draw with rich flavour\u003c\/li\u003e\n\u003cli\u003e1.2 Ohms UN2 Meshed-H - the Caliburn G2 coil, mesh on a tight, cigarette-like MTL draw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll three work best with 50\/50 blends, high PG e-liquid and nic salts. High-VG e-liquid is too thick for a pod coil this small.\u003c\/p\u003e\n\u003ch4\u003eLong-Lasting UN2 Meshed-H\u003c\/h4\u003e\n\u003cp\u003eUwell rates the UN2 Meshed-H as long-lasting, and it is the mesh on the 0.8 and 1.2 Ohms. It is designed to heat the e-liquid evenly, which prolongs the coil's lifespan.\u003c\/p\u003e\n\u003ch4\u003ePro-FOCS Flavour Technology\u003c\/h4\u003e\n\u003cp\u003eThe Caliburn G coils for the KOKO Prime feature Pro-FOCS, Uwell's patented flavour adjustment technology, designed to bring out the taste of the e-liquid in the pod.\u003c\/p\u003e\n\u003ch4\u003eFlip the Pod\u003c\/h4\u003e\n\u003cp\u003eOn the Caliburn G and the KOKO Prime, the pod fits in two ways. Turning it 180 degrees and inserting it back into the device will switch the same coil between a restricted direct-to-lung draw and a mouth-to-lung one.\u003c\/p\u003e\n\u003ch4\u003eFitting a New Coil\u003c\/h4\u003e\n\u003cp\u003eThese are push-fit coils. Remove the old coil, then align the new one with the locating slot on the pod, as Uwell recommends. Fill the pod and leave it a few minutes so the coil can saturate. Priming before you vape helps prevent dry hits and gives you the best flavour.\u003c\/p\u003e\n\u003ch4\u003eCompatible Caliburn Kits\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDevice\u003c\/th\u003e\n\u003cth\u003eCoils it uses\u003c\/th\u003e\n\u003cth\u003eNote\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn G\u003c\/td\u003e\n\u003ctd\u003e0.8 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 18 W. The 1.0 Ohms is a Caliburn G Coil as well.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn G2\u003c\/td\u003e\n\u003ctd\u003e0.8 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 18 W.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn GK2\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 18 W. 1.2 pre-installed, 0.8 spare, 1.0 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn GK2 Vision\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 18 W. 1.0 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn X\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e5 to 20 W. 0.8 pre-installed, 1.2 spare, 1.0 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn Tenet\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 16 W. 0.8 and 1.2 in the box, 1.0 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn Tenet Koko\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 18 W. 0.8 and 1.2 in the box, 1.0 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn KOKO Prime\u003c\/td\u003e\n\u003ctd\u003e0.8 and 1.0 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 15 W. 1.0 pre-installed, 0.8 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn KOKO Prime Vision\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 18 W. 1.0 pre-installed, 0.8 spare, 1.2 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn GZ2\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 17 W. 0.8 and 1.2 in the box, 1.0 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn GZ2 Cyber\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eAs the Caliburn GZ2.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn \u0026amp; IronFist L\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eMaximum 16 W. 0.8 and 1.2 in the box, 1.0 sold separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliburn Explorer\u003c\/td\u003e\n\u003ctd\u003e0.8 and 1.2 Ohms\u003c\/td\u003e\n\u003ctd\u003eFits two coils at once, for a maximum 32 W with two 0.8 Ohms fitted.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese coils also fit the empty replacement pods for the Caliburn G, the G2, GK2 and GZ2, the Caliburn X and the Caliburn \u0026amp; IronFist L, including the \u003ca href=\"\/products\/uwell-caliburn-g2-replacement-pod-pack-of-2\" title=\"Uwell Caliburn G2 replacement pods\"\u003eUwell Caliburn G2 replacement pods\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eWhat makes a Caliburn G coil last longer?\u003c\/h4\u003e\n\u003cp\u003eCoil life varies with how you vape. Thicker high-VG e-liquid can affect wicking and shorten coil life, and a coil will burn out faster at higher power. Priming a new coil properly will help it last longer. A drop-off in flavour or a burnt taste means it is time for a new coil.\u003c\/p\u003e\n\u003ch4\u003eIs the 1.2 Ohms the Caliburn G2 coil?\u003c\/h4\u003e\n\u003cp\u003eYes. The 1.2 Ohms is the Caliburn G2 Coil, while the 0.8 and 1.0 Ohms are the Caliburn G Coil. Check your device before selecting a resistance, since not every Caliburn kit is compatible with all three.\u003c\/p\u003e","brand":"Uwell","offers":[{"title":"0.8 Ohm","offer_id":39584117522467,"sku":"Uwell-CaliburG2-Coil-0.8-Ohm","price":9.99,"currency_code":"GBP","in_stock":false},{"title":"1.0 Ohm","offer_id":53574831669621,"sku":"Uwell-CaliburG2-Coil-1.0-Ohm","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm","offer_id":39584117555235,"sku":"Uwell-CaliburG2-Coil-1.2-Ohm","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/caliburn-g2-replacement-coils-by-uwell.png?v=1668960080"},{"product_id":"smok-tfv18-replacement-coils","title":"SMOK TFV18 Replacement Coils","description":"\u003cp\u003eThe SMOK TFV18 Replacement Coils are made for high VG e-liquid, 70% or above, and sub-ohm direct-to-lung (DTL) vaping. The full-size TFV18 tank uses either a \u003cstrong\u003e0.33 Ohms\u003c\/strong\u003e Meshed coil or a \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e Dual Meshed coil, supplied in a \u003cstrong\u003epack of 3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eBoth are built with FeCrAl mesh, and they are tank coils for a mod rather than pod coils.\u003c\/p\u003e\n\u003ch4\u003eFull-Size or Mini\u003c\/h4\u003e\n\u003cp\u003eThe full-size TFV18 and the smaller TFV18 Mini use different coils, and the two are not interchangeable. The Mini uses a 0.2 Ohms mesh coil labelled V18 Mini, made for the Mini tank as found on the SMOK G-Priv 4 Kit.\u003c\/p\u003e\n\u003ch4\u003eCoils by Tank\u003c\/h4\u003e\n\u003cp\u003eBoth full-size coils are suitable at wattages between 80 - 140W, and the Mini's 0.2 Ohms between 40 - 80W.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eTank\u003c\/th\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eResistance\u003c\/th\u003e\n\u003cth\u003eBest vaped at\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTFV18\u003c\/td\u003e\n\u003ctd\u003eMeshed\u003c\/td\u003e\n\u003ctd\u003e0.33 Ohms\u003c\/td\u003e\n\u003ctd\u003e100 - 110W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTFV18\u003c\/td\u003e\n\u003ctd\u003eDual Meshed\u003c\/td\u003e\n\u003ctd\u003e0.15 Ohms\u003c\/td\u003e\n\u003ctd\u003e90 - 110W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTFV18 Mini\u003c\/td\u003e\n\u003ctd\u003eV18 Mini Meshed\u003c\/td\u003e\n\u003ctd\u003e0.2 Ohms\u003c\/td\u003e\n\u003ctd\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhy is the coil labelled V18 when the tank is a TFV18?\u003c\/h4\u003e\n\u003cp\u003eV18 Mini is SMOK's name for the Mini's coil, and TFV18 Mini is the name of the tank it fits. The full-size coils use the TFV18 name, so match the resistance and the tank a coil is made for.\u003c\/p\u003e\n\u003ch4\u003eWhich coils fit a TFV16 tank?\u003c\/h4\u003e\n\u003cp\u003eIts own. SMOK makes a separate range for the TFV16, and you will find it on our \u003ca href=\"\/products\/smok-tfv16-replacement-coils\" title=\"SMOK TFV16 Replacement Coils\"\u003eSMOK TFV16 Replacement Coils\u003c\/a\u003e page. The three coils above are for the TFV18 and the TFV18 Mini.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.15 Ohm - Dual Meshed","offer_id":40571663220771,"sku":"Smok-TFV18-Coil-0.15-Ohm-Dual","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm","offer_id":40577714290723,"sku":"Smok-TFV18-Coil-0.2-Ohm","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.33 Ohm - Meshed","offer_id":40571663253539,"sku":"Smok-TFV18-Coil-0.33-Ohm-Mesh","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/tfv18-box.png?v=1668949228"},{"product_id":"vaporesso-gti-replacement-coils","title":"Vaporesso GTi Replacement Coils","description":"\u003cp\u003eVaporesso GTi Replacement Coils feature \u003cstrong\u003eCOREX 2.0\u003c\/strong\u003e mesh with upgraded COREX cotton, designed for direct-to-lung (DTL) vaping. They are sold in a \u003cstrong\u003epack of 5\u003c\/strong\u003e, with \u003cstrong\u003esix coils\u003c\/strong\u003e to choose from: \u003cstrong\u003e0.15, 0.2, 0.4 and 0.5 Ohms\u003c\/strong\u003e in mesh, and the \u003cstrong\u003e0.2 and 0.4 Ohms\u003c\/strong\u003e in Dual Mesh, covering \u003cstrong\u003e30W to 90W\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe 0.15 and 0.2 Ohms are the high-power coils in the range, ideal for a warmer vape and more vapour, while the 0.4 and 0.5 Ohms work best at lower wattages. All six are sub-ohm and best for high-VG e-liquid, 70% VG or more. Vaporesso's GTX and MTX coils are not compatible with a GTi tank.\u003c\/p\u003e\n\u003ch4\u003eGTi Coils at a Glance\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTi 0.15 Ohms Mesh\u003c\/td\u003e\n\u003ctd\u003e75-90W, best at 85W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTi 0.2 Ohms Mesh\u003c\/td\u003e\n\u003ctd\u003e60-75W, best at 65W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTi 0.2 Ohms Dual Mesh\u003c\/td\u003e\n\u003ctd\u003e60-75W, best at 65W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTi 0.4 Ohms Mesh\u003c\/td\u003e\n\u003ctd\u003e50-60W, best at 55W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTi 0.4 Ohms Dual Mesh\u003c\/td\u003e\n\u003ctd\u003e50-60W, best at 55W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGTi 0.5 Ohms Mesh\u003c\/td\u003e\n\u003ctd\u003e30-40W, best at 35W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe iTank T comes with a 0.2 Ohms coil fitted and a 0.4 Ohms in the box. The two Dual Mesh coils carry two mesh grids in one coil, at the same wattages as the mesh coil in their resistance. They are made for the iTank T Dual Mesh tank, and that tank is compatible with the single mesh coils as well.\u003c\/p\u003e\n\u003ch4\u003eIntense-Flavour COREX 2.0\u003c\/h4\u003e\n\u003cp\u003eCOREX 2.0 is Vaporesso's latest mesh technology, with an optimised morph mesh grid for even heating and a fast ramp-up. Expect an intense flavour from the first puff to the last.\u003c\/p\u003e\n\u003ch4\u003eLonger-Lasting COREX Cotton\u003c\/h4\u003e\n\u003cp\u003eThe upgraded COREX cotton material withstands more heat, which prevents burnt tastes and gives extended coil life, even at 85W.\u003c\/p\u003e\n\u003ch4\u003eLarger Airways\u003c\/h4\u003e\n\u003cp\u003eGTi coils are built with larger airways for a smoother draw and plenty of vapour.\u003c\/p\u003e\n\u003ch4\u003eGTi Tanks and Kits\u003c\/h4\u003e\n\u003cp\u003eThe iTank, iTank 2, iTank T and iTank T Dual Mesh tanks use GTi coils, along with the Armour Ultra, Armour Max and Armour S, the GEN 200, GEN 80S, GEN Max and GEN SE, and the Target 100 and Target 200. The iTank edition of the Target 80 is also compatible, and like the GEN 80S and the GEN SE it has a max output of 80W. Please note: the 0.15 Ohms is a 75-90W coil, so choose the 0.2 or 0.4 Ohms for an 80W kit. The iTank M and the original GEN Fit that comes with it are on Vaporesso's MTX platform, and those two use the \u003ca href=\"\/products\/vaporesso-mtx-replacement-coils\" title=\"Vaporesso MTX Replacement Coils\"\u003eVaporesso MTX Replacement Coils\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003ePriming and Coil Changes\u003c\/h4\u003e\n\u003cp\u003ePrime each new coil before your first draw. Add a few drops of e-liquid to the coil, fill the tank, then allow the coil five minutes to saturate. This prevents dry hits and ensures the best flavour. Changing a coil is quick and easy with the push-fit installation.\u003c\/p\u003e\n\u003ch4\u003eWhen Should I Change a GTi Coil?\u003c\/h4\u003e\n\u003cp\u003eHow long a coil lasts will vary. A 0.15 Ohms at 85W uses more power and more e-liquid than a 0.5 Ohms at 35W, and it will burn out faster too. Sweeteners matter as well: heavily sweetened e-liquid caramelises on the mesh and shortens coil life whichever resistance you use. Once the flavour drops off or a burnt taste comes through, it is time for a new coil.\u003c\/p\u003e\n\u003ch4\u003eCan I Use GTi Coils in a GTX Tank?\u003c\/h4\u003e\n\u003cp\u003eNo. GTi and GTX are different Vaporesso coils and they are not compatible. Check the coil in your kit and match it: a GTX tank needs a GTX coil, and a GTi tank needs a GTi coil.\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.15 Ohm - Mesh","offer_id":39635687047203,"sku":"Vapor-GTI-Coil-0.15-Ohm","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.2 Ohm - Dual Mesh","offer_id":57401746391413,"sku":"Vapor-GTI-Coil-0.2-Ohm-Dual-Mesh","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.2 Ohm - Mesh","offer_id":39635687014435,"sku":"Vapor-GTI-Coil-0.2-Ohm","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm - Dual Mesh","offer_id":57401746424181,"sku":"Vapor-GTI-Coil-0.4-Ohm-Dual-Mesh","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm - Mesh","offer_id":39635687079971,"sku":"Vapor-GTI-Coil-0.4-Ohm","price":11.95,"currency_code":"GBP","in_stock":false},{"title":"0.5 Ohm - Mesh","offer_id":40544395919395,"sku":"Vapor-GTI-Coil-0.5-Ohm","price":11.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/files\/Vaporesso-GTi-Replacement-Coils-Mesh-0.2Ohm.jpg?v=1723280270"},{"product_id":"smok-rpm-3-replacement-coils","title":"SMOK RPM 3 Replacement Coils","description":"\u003cp\u003eThe SMOK RPM 3 Replacement Coils fit the RPM 5, and there is no RPM 5 coil: an RPM 5 kit uses an RPM 3. They are single mesh coils built on KA1 wire, for direct-to-lung (DTL) vaping. The \u003cstrong\u003e0.15 Ohms\u003c\/strong\u003e is rated at \u003cstrong\u003e40-80W\u003c\/strong\u003e and the \u003cstrong\u003e0.23 Ohms\u003c\/strong\u003e at \u003cstrong\u003e20-45W\u003c\/strong\u003e. There are \u003cstrong\u003e5 per pack\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe RPM 5 Pro, the Nord 5, the Nord GT, the RPM 85 and the RPM 100 are compatible with them as well.\u003c\/p\u003e\n\u003ch4\u003eMore Vapour or Less\u003c\/h4\u003e\n\u003cp\u003eThe 0.15 Ohms is the one for more vapour, with a fast ramp up and intense flavour. The 0.23 Ohms is smoother and richer, with less vapour. Both are best suited to a high VG e-liquid, at 70% or more.\u003c\/p\u003e\n\u003ch4\u003eCompatible Kits and Pods\u003c\/h4\u003e\n\u003cp\u003eThese coils are designed for use with the RPM 5, Nord 5, Nord GT and RPM 85\/100 pods: between them, the pods in the RPM 5, RPM 5 Pro, Nord 5, Nord GT, RPM 85 and RPM 100. RPM, RPM 2 and RPM 3 coils each fit a different pod.\u003c\/p\u003e\n\u003ch4\u003eDo RPM or RPM 2 coils fit an RPM 5?\u003c\/h4\u003e\n\u003cp\u003eNo. SMOK's \u003ca href=\"\/products\/smok-rpm-replacement-coils\" title=\"RPM coils\"\u003eRPM coils\u003c\/a\u003e are made for an RPM pod and its \u003ca href=\"\/products\/smok-rpm-2-replacement-coils\" title=\"RPM 2 coils\"\u003eRPM 2 coils\u003c\/a\u003e for an RPM 2 pod.\u003c\/p\u003e\n\u003ch4\u003eIs there a mouth-to-lung RPM 3 coil?\u003c\/h4\u003e\n\u003cp\u003eBoth RPM 3 coils are direct-to-lung, so there is no mouth-to-lung option in the range. If you want a tighter draw, similar to a cigarette, this is not the range for it. The RPM 3 is a sub-ohm, high VG range for vapour and flavour.\u003c\/p\u003e","brand":"Smok","offers":[{"title":"0.15 Ohm - Mesh","offer_id":39639708336163,"sku":"Smok-RPM3Mesh-Coil-0.15-Ohm","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.23 Ohm - Mesh","offer_id":39639708368931,"sku":"Smok-RPM3Mesh-Coil-0.23-Ohm","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok-rpm-3-5-pcs-coils.png?v=1668968427"},{"product_id":"geekvape-p-series-replacement-coils","title":"Geekvape P Series Replacement Coils","description":"\u003cp\u003eGeekvape P Series Replacement Coils are designed for direct-to-lung (DTL) vaping at higher power and come in a \u003cstrong\u003epack of 5\u003c\/strong\u003e. The \u003cstrong\u003e0.2 Ohms\u003c\/strong\u003e is rated at \u003cstrong\u003e60-70W\u003c\/strong\u003e and the \u003cstrong\u003e0.4 Ohms\u003c\/strong\u003e at \u003cstrong\u003e50-60W\u003c\/strong\u003e, both \u003cstrong\u003eKA1\u003c\/strong\u003e mesh coils with an anti-spitback core.\u003c\/p\u003e\n\u003cp\u003eThe P Series is Geekvape's coil line for the Aegis Boost Pro generation, and a fresh coil keeps your kit up and running. Installation is push-fit, quick and mess-free. Both are sub-ohm, so pair them with a high-VG e-liquid, 70% VG and up.\u003c\/p\u003e\n\u003ch4\u003eCoil Choice by Kit\u003c\/h4\u003e\n\u003cp\u003eGeekvape recommends both resistances for some kits and the 0.4 Ohms for others:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAegis Boost Pro and Aegis Boost Pro 2 - both resistances, the 0.2 Ohms at 60-70W and the 0.4 Ohms a step down at 50-60W\u003c\/li\u003e\n\u003cli\u003eObelisk 60 - the 0.4 Ohms\u003c\/li\u003e\n\u003cli\u003eZ100C DNA kit - the 0.4 Ohms\u003c\/li\u003e\n\u003cli\u003eDigiflavor XP 77W kit - both, and the kit ships with a 0.2 Ohms fitted and a 0.4 Ohms spare\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSo the 0.4 Ohms is the resistance Geekvape recommends for all five kits. Please note: the Z100C DNA kit was supplied with a 0.15 Ohms coil pre-installed, rated at 70-85W, so the 0.4 Ohms you replace it with has a lower wattage range of 50-60W. Please note: the Aegis Boost and Boost Plus are not compatible with a P coil. Those kits use the \u003ca href=\"\/products\/geekvape-b-series-boost-replacement-coils\" title=\"Geekvape B Series coils\"\u003eGeekvape B Series coils\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eLonger-Lasting Anti-Spitback Core\u003c\/h4\u003e\n\u003cp\u003eThe mesh heats your e-liquid evenly, giving you fast ramp-up, full flavour and plenty of vapour at both resistances. Each coil is fitted with an anti-spitback core for longer coil life.\u003c\/p\u003e\n\u003ch4\u003eWhen should I replace a P Series coil?\u003c\/h4\u003e\n\u003cp\u003eYou'll know when it's time for a new one: the flavour starts to fade, or you get a burnt taste. Vaping at the top of the power range, sweeter e-liquids, chain vaping and skipping the priming step all shorten a coil's life. To get the most out of each coil, fill the pod and allow 5 minutes for the coil to soak up the e-liquid before your first puff.\u003c\/p\u003e\n\u003ch4\u003eDo these coils include the pod?\u003c\/h4\u003e\n\u003cp\u003eThe pack is 5 coils. If the pod on the Aegis Boost Pro becomes cracked or damaged, you need a \u003ca href=\"\/products\/geek-vape-aegis-boost-pro-replacement-pods\" title=\"replacement Aegis Boost Pro pod\"\u003ereplacement Aegis Boost Pro pod\u003c\/a\u003e rather than a new coil.\u003c\/p\u003e","brand":"Geek Vape","offers":[{"title":"0.2 Ohm","offer_id":39639719444515,"sku":"GeekVape-PSeri-Coil-0.2-Ohm","price":9.95,"currency_code":"GBP","in_stock":false},{"title":"0.4 Ohm","offer_id":39639719477283,"sku":"GeekVape-PSeri-Coil-0.4-Ohm","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/geekvape-aegis-boost-replacement-coil-5pcs-box_582c4343-29a3-4413-968f-f6c955940048.png?v=1662806939"},{"product_id":"smok-lp2-replacement-coils","title":"SMOK LP2 Replacement Coils","description":"\u003cp\u003eSMOK LP2 replacement coils are made for the pod kits built around the LP2 pod, from the RPM 4 and Nord 50W to the G-Priv pod kits and Morph Pod-80. Supplied in a \u003cstrong\u003epack of 5\u003c\/strong\u003e, each coil is push-fit.\u003c\/p\u003e\n\u003cp\u003eIf you want fuller flavour and bigger clouds, fit the meshed 0.23 Ohms for a direct-to-lung (DTL) vape - the meshed 0.4 Ohms is the lower-powered of the two mesh coils. If you prefer the tightest draw of the three, opt for the 0.6 Ohms dual-coil (DC), SMOK's mouth-to-lung (MTL) option in the range.\u003c\/p\u003e\n\u003ch4\u003eWattage and E-Liquid Pairing\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eCoil\u003c\/th\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003cth\u003ePair With\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.23 Ohms Meshed\u003c\/td\u003e\n\u003ctd\u003e20-45W\u003c\/td\u003e\n\u003ctd\u003eHigh-VG shortfills\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4 Ohms Meshed\u003c\/td\u003e\n\u003ctd\u003eLower than the 0.23 Ohms\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6 Ohms DC\u003c\/td\u003e\n\u003ctd\u003e15-25W\u003c\/td\u003e\n\u003ctd\u003e50\/50 or nic salts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eMesh Coils\u003c\/h4\u003e\n\u003cp\u003eThe 0.23 and 0.4 Ohms use SMOK's meshed build, a wider heating surface that ramps up quickly and heats evenly.\u003c\/p\u003e\n\u003ch4\u003eTriple Silicone Rings\u003c\/h4\u003e\n\u003cp\u003eSMOK fits three silicone rings to every LP2 coil, and the added ring at the base fills the gap to the pod for a leak-resistant seal.\u003c\/p\u003e\n\u003ch4\u003eWhich SMOK Kits Use LP2 Coils\u003c\/h4\u003e\n\u003cp\u003eThese coils are compatible with every SMOK kit that uses the LP2 pod. Please note: most of these kits come with more than one pod type - the RPM 4 has an RPM pod and an LP2 pod, the Nord 50W also has Nord and RPM pods, and the two G-Priv pod kits also have RPM 2 pods. LP2 coils only fit the LP2 pod in each case. The Morph Pod-80 and Morph S Pod-80 are LP2-only.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSMOK RPM 4\u003c\/li\u003e\n\u003cli\u003eSMOK Nord 50W\u003c\/li\u003e\n\u003cli\u003eSMOK G-Priv Pod Kit\u003c\/li\u003e\n\u003cli\u003eSMOK G-Priv Pro Pod Kit\u003c\/li\u003e\n\u003cli\u003eSMOK Morph Pod-80\u003c\/li\u003e\n\u003cli\u003eSMOK Morph S Pod-80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDo LP2 Coils Fit the SMOK Nord X or SCAR?\u003c\/h4\u003e\n\u003cp\u003eNo. The Nord X, SCAR-P3 and SCAR-P5 are not compatible with LP2 coils: their RPM 2 pods use SMOK's RPM 2 coils, and their RPM pods use the original RPM coils. Check which pod your kit is fitted with, then choose between our \u003ca href=\"\/products\/smok-rpm-2-replacement-coils\" title=\"SMOK RPM 2 Replacement Coils\"\u003eSMOK RPM 2 Replacement Coils\u003c\/a\u003e and \u003ca href=\"\/products\/smok-rpm-replacement-coils\" title=\"SMOK RPM Replacement Coils\"\u003eSMOK RPM Replacement Coils\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Smok","offers":[{"title":"0.23 Ohm - Meshed DL","offer_id":40571662958627,"sku":"Smok-LP2-Coil-0.23-Ohm-LP2","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm - Meshed","offer_id":40571662991395,"sku":"Smok-LP2-Coil-0.4-Ohm-LP2","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm - DC","offer_id":40571663024163,"sku":"Smok-LP2-Coil-0.6-Ohm-LP2","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0111\/8712\/6331\/products\/smok-lp2-box.png?v=1668947536"}],"url":"https:\/\/vape360.co.uk\/collections\/vape-coils.oembed?page=2","provider":"Vape 360 Uk","version":"1.0","type":"link"}